Adds implementation for the Bridge Configuration Server model.
Updates `brg_cfg` module to add sanity check for
bt_mesh_brg_cfg_tbl_remove() API. Also, updates the unit test
accordingly.
Adds documentation for the Bridge Configuration Server model
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Implements the Bridge Configuration Client model.
Adds opcodes for all Bridge messages to `foundation.h`. Adds client-side
support for these messages.
Adds a new Kconfig option for the Bridge Configuration Client model to
configure the waiting time for respones for acked messages.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The generated HTML was broken, even though the rst files themselves
contained the correct URLs. Update to a different format which should
generate the right output.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The auto-pts project is now days hosted under an independent organization
instead of the intel one.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Modify the bt_bap_scan_delegator_add_src to take an address and
a sid instead of a PA sync object, so that the scan delegator
can add a source without syncing to the PA.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added Isochronous channels to the controller
Moved Isochronous channels from LE Audio to the host
Changed the LE Audio to refer to the page where
the feature is more detailed described.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With the new Bluetooth Qualification process the QDID and link to
launchstudio are outdated, remove them.
Also remove the ICS listing as it hasn't been updated for a while.
Instead add a download link to the Zephyr Bluetooth Host ICS file.
Update the documentation configuration script to include the ICS file
(`*.pts`) in the external contents.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Remake the Zephyr Generic audio framework (GAF) figure to a graphviz
version.
This makes it easier to modify it directly in the .rst file.
This also adds the missing GMAP/GMAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remake the Generic audio framework (GAF) figure to a graphviz version.
This makes it easier to modify it directly in the .rst file.
This also adds the missing GMAP/GMAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remake the Bluetooth Audio Architecture figure to a graphviz
version. This makes it easier to modify it directly in the
.rst file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the sample application as existing for the CAP initiator
and CAP acceptor.
The samples are still in progress of being improved and
fully featured, but they exist and can be used already now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_mesh_cfg_srv structure was removed in ad2fd44d7a, no need to
keep this text here anymore.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove the "stream" part of the value and functions to
better fit with the name in the assigned numbers document.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
While Breathe seems to not care and creates hyperlinks either way, the
proper role to mention a C enumerator is :c:enumerator:. :c:enum: is to
be used to refer to the enum itself.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Removes the CIS connection establishment from bt_bap_stream_start
and move the behavior to a new funciton bt_bap_stream_connect.
This has 2 advantages:
1) The behavior of bt_bap_stream_start is much more clear and more aligned
with the spec's behavior for the receiver start ready opcode.
2) It is possible to connect streams in both the enabling
and the QoS configured state with bt_bap_stream_connect as
per the spec. This allows us to pass additional PTS test cases.
To implement this new behavior, samples and tests have been updated.
The CAP Initiator implementation has also been updated
to accomodate for the change in BAP, but the CAP
initiator implementation should work the same for application, except
that it's now possible to do unicast start on ASEs in any order
(https://github.com/zephyrproject-rtos/zephyr/issues/72138).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The cap_initiator unicast_stop shell command had the wrong
minimum parameter count (as it defaults to all).
Some indentation had also gone wrong for it in the
documentation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `BT_DEBUG_*` Kconfig symbols have been deprecated for more than 2
versions, remove them.
Update code that was still using them.
Remove the Bluetooth specific `Kconfig.template.log_config_bt` and use
`Kconfig.template.log_config_inherit` from the logging subsystem
instead, now that the legacy symbols can be removed.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add a new subdir, audio, and move all the audio related
documentation files to that directory, similar to mesh.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the Bluetooth shell and its documentation to not use those
options anymore.
The option of the legacy advertiser run with `bt advertise` and the
behavior hasn't changed. The code has been updated to no longer use the
advertiser option but the original behavior has been reproduced.
The option of the extended advertiser have been updated to be more
explicit. The options `name` and `name-ad` have been removed from the
`bt adv-create` and `bt adv-param`. The option `name` and `dev-name`
have been added to the `bt adv-data` command.
- `name <str>` will advertise the given name.
- `dev-name` will advertise the device name.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
LE Audio sticks out in a few ways that's worth knowing
not only as a contributor, but also as an application
developer. These things have been documented, and may be
expanded upon later.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modifies the audio configuration (ac) commands for CAP
and GMAP to use the default presets instead of supplying
the preset as arguments. This will allow the user to
use the `bap preset` command to configure everything in the
codec configuration before the AC commands are issued.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add notes on how the LE Audio stack is designed and why data is
sometimes placed and controlled by the stack or the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The cap_initiator unicast_stop command will now stop
all streams by default, without supplying the "all" argument.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds a small overview over resources
related to LE Audio, both Zephyr specific and
general information from the Bluetooth SIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the services have some unique points worth knowing
as both a contributor and an application developer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bap_broadcast_assistant mod_src command can now take "unknown"
as a value to supply BT_BAP_PA_INTERVAL_UNKNOWN to the scan
delegator.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The documentation for the command
bap_broadcast_assistant broadcast_code
was incorrect and has been fixed.
Additionally, and example of the command has been added
in the shell documentation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since GTBS and GMCS in both spec definitions and
in the Zephyr implemenation are notably different,
it is worthwhile pointing these out in the documentation
for content control.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added clarification on AES-CMAC usage in DFU metadata, emphasizing its
sole role as a hashing function for the incoming composition data hash.
Notably, it utilizes a fixed key and is not employed for encryption
purposes.
Signed-off-by: Stine Åkredalen <stine.akredalen@nordicsemi.no>
