gpio_basic_api test configuration drivers.gpio.2pin_arduino expects
arduino pins D2 and D3 to be available but they aren't declared in
arduino connectors for this board as not available by default.
Remove arduino_gpio compatibility declaration for now.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
update die_temp node for some stm32 boards,
need that for run sensor die_temp_polling samples.
don't need to modify sample.yaml
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
-enable dac in nucleo_u031r8, stm32u083c_dk and nucleo_u083rc
- add dac as new supported interface in docs
- update yaml files
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
tfm_ipc sample is now using the zephyr:code-sample directive so it should
be referenced with the respective role, not :ref: anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the STM32 samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add Zephyr UDC (USB Device Class) and clk_hsi48 (hi-speed
internal 48 MHz) devicetree nodes so that the nucleo_l496zg
board works with other USB DC samples and tests.
Update the board yaml description to indicate usb and usb
device roles are supported.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Update the pyocd runner configuration of the nucleo_g0b1re
to use the correct target.
Pyocd had issues only just after the release of the G0B1/C1 line.
This issue has already been fixed a few releases ago.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Update all STM32 official boards Doc Flashing section.
Correct some typos and remove outdated information.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Add STM32CubeProgrammer where it is not available, & make it
default flashing method by placing it 1st in board.cmake
Before this change, the west runner that's selected when calling
'westflash' without the '--runner ...' option is kind of arbitrary
& depends on which runner is 1st in board.cmake file.
Another reason this change is needed is that STM32CubeProg is the only
available way to check/modify Option Bytes, and to flash code to
external Flash on many STM32 boards.
This change does not affect 'west debug' behavior, which defaults to
the debugger (OpenOCD/JLink) that is included first in board.cmake
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
`CLOCK_CONTROL` subsystem being selected directly at family level,
remove it from individual board configurations.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
On stm32h735g_disco, `arduino_gpio` is declared while the connector is not
actually described.
On stm32h750b_dk, connector description was simply not included.
All these are blocking tests trying to make profit of arduino gpio
connectors.
Fix these.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The previously added overlay can now be used. Wire up SPI tests for the
Nucleo h745zi-q board.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Connect D12(PA6) & D22(PB5) pins on the board to pass the test.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Vasilij Strassheim <vasilij.strassheim@linutronix.de>
The board is capable to serve SPI on the Arduino extention header.
Configure and enable SPI to work on the extention.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Flash partition was defining a scratch area which was implying the use
of mcuboot BOOT_SWAP_USING_SCRATCH f/w update method.
By removing this partition, mcuboot will automatically use
BOOT_PREFER_SWAP_MOVE method which should be prefered as it levels
flash wear. Incidentally increase slot1 by one sector (as this is
preferred for the swap method).
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Following addition of a `name` to hal_stm32 module, the command to fetch
blobs that are required to build BLE applications on STM32WBA socs is now
changed from `west blob fetch stm32` to `west blob fetch hal_stm32`.
Update documentation and warn users in migration guide.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add the support of the reset-cmd property for the stm32h7 disco kits
where the quad-spi flash is mt25ql512ab
This device accepts the SPI_NOR_CMD_RESET_En/SPI_NOR_CMD_RESET_MEM
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for the ST nucleo h755zi_q board which
uses an stm32h755 in the st nucleo-144 board
format.
Signed-off-by: Mike Banducci <michael.banducci@sandc.com>
This commit add the description of the fmc in the SoC stm32l5, and the
description of the screen controller st7789v in the board stm32l562e-dk.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Add support for using the stm32 fmc to interact with a display
controller, using Intel 8080 protocol with a 16 bits parallel bus.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
This commit enables pyOCD support for the STM32F429I Discovery board.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add few other sensors support to steval_stwinbx1 board:
- IIS2MDC: 3-axis magnetometer
- ISM330DHCX: IMU, 3D accelerometer and 3D gyroscope
- IIS2DLPC: 3-axis accelerometer
- IIS2ICLX: 2-axis digital inclinometer
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fix start address of storage partition.
Address did not match reg address of devicetree node, and the size of
the storage partition would make it exceed flash region.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
This commit disables the Vbat sensor on the Nucleo-H753ZI
board, as the corresponding ADC is not enabled.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit disables the Vbat sensor on the STM32H735G
Discovery board, as the corresponding ADC is not enabled.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Remove HTS221 sensor support from sensortile_box_pro as it has been ruled
out from final version. In fact, HTS221 is in the process of being
terminated and is not recommended for new design. The candidate replacement
is SHT40 from Sensirion, which is available also as a DIL24 adapter, which
can be plugged on sensortile_box_pro board.
See SENSEVAL-SHT4XV1:
https://www.st.com/en/partner-products-and-services/senseval-sht4xv1.html
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Set the Mode Register definition of the SDRAM command Mode
register to 0x230 when programming the CAS_LATENCY
of the external memory mode.
Adjust the delay on read data path.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add board support for nucleo_h503rb.
STM32CubeProgrammer and pyocd are supported as runner.
The following samples were tested:
- samples/hello_world
- samples/basic/blinky
- samples/basic/button
- samples/subsys/task_wdt
Signed-off-by: Sandra Schmidt <sandra.schmidt@arrow.com>
The B1 user button has an active-high polarity, but was configured
active-low in the DTS file. This commit fixes that.
Fixes#75867
Signed-off-by: Lasse Fröhner <lasse@starcopter.com>
Define the support /openocd.cfg and the board.cmake to add the openOCD
as runner for the stm32h5x boards.
Note that the openOCD is hack downloaded and build from
from https://github.com/STMicroelectronics/OpenOCD
Signed-off-by: Francois Ramu <francois.ramu@st.com>
