Remove the limitation of number of cpu support in x86 arch.
Also add support for retrieve cpu informations such as for
hybird cores.
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
In order to bring consistency in-tree, migrate all arch code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The boot code of x86_64 initializes the stack (if enabled)
with a hard-coded size for the ISR stack. However,
the stack being used does not have to be the ISR stack,
and can be any defined stacks. So pass in the actual size
of the stack so the stack can be initialized properly.
Fixes#21843
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The x86 paging code has been rewritten to support another paging mode
and non-identity virtual mappings.
- Paging code now uses an array of paging level characteristics and
walks tables using for loops. This is opposed to having different
functions for every paging level and lots of #ifdefs. The code is
now more concise and adding new paging modes should be trivial.
- We now support 32-bit, PAE, and IA-32e page tables.
- The page tables created by gen_mmu.py are now installed at early
boot. There are no longer separate "flat" page tables. These tables
are mutable at any time.
- The x86_mmu code now has a private header. Many definitions that did
not need to be in public scope have been moved out of mmustructs.h
and either placed in the C file or in the private header.
- Improvements to dumping page table information, with the physical
mapping and flags all shown
- arch_mem_map() implemented
- x86 userspace/memory domain code ported to use the new
infrastructure.
- add logic for physical -> virtual instruction pointer transition,
including cleaning up identity mappings after this takes place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Implement a set of per-cpu trampoline stacks which all
interrupts and exceptions will initially land on, and also
as an intermediate stack for privilege changes as we need
some stack space to swap page tables.
Set up the special trampoline page which contains all the
trampoline stacks, TSS, and GDT. This page needs to be
present in the user page tables or interrupts don't work.
CPU exceptions, with KPTI turned on, are treated as interrupts
and not traps so that we have IRQs locked on exception entry.
Add some additional macros for defining IDT entries.
Add special handling of locore text/rodata sections when
creating user mode page tables on x86-64.
Restore qemu_x86_64 to use KPTI, and remove restrictions on
enabling user mode on x86-64.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't need to set up GDT data descriptors for setting
%gs. Instead, we use the x86 MSRs to set GS_BASE and
KERNEL_GS_BASE.
We don't currently allow user mode to set %gs on its own,
but later on if we do, we have everything set up to issue
'swapgs' instructions on syscall or IRQ.
Unused entries in the GDT have been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The page tables to use are now stored in the cpuboot struct.
For the first CPU, we set to the flat page tables, and then
update later in z_x86_prep_c() once the runtime tables have
been generated.
For other CPUs, by the time we get to z_arch_start_cpu()
the runtime tables are ready do go, and so we just install
them directly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add duplicate per-CPU data structures (x86_cpuboot, tss, stacks, etc.)
for up to 4 total CPUs, add code in locore and z_arch_start_cpu().
The test board, qemu_x86_long, now defaults to 2 CPUs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A new 'struct x86_cpuboot' is created as well as an instance called
'x86_cpuboot[]' which contains per-CPU boot data (initial stack,
entry function/arg, selectors, etc.). The locore now consults this
table to set up per-CPU registers, etc. during early boot.
Also, rename tss.c to cpu.c as its scope is growing.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
There's no need to qualify the 64-bit CS/DS selectors, and the GS and
TR selectors are renamed CPU0_GS and CPU0_TR as they are CPU-specific.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The linker script was missing symbols that defined the boundaries
of kernel memory segments (_image_rom_end, etc.). These are added
so that core/memmap.c can properly account for those segments.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A space is allocated in the TSS for per-CPU variables. At present,
this is only a 'struct _cpu *' to find the _kernel CPU struct. The
locore routines are rewritten to find _current and _nested via this
pointer rather than referencing the _kernel global directly.
This is obviously in preparation for SMP support.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Declare the 64-bit TSS as a struct, and define the instance in C.
Add a data segment selector that overlaps the TSS and keep that
loaded in GS so we can access the TSS via a segment-override prefix.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
k_thread.thread_state (or rather, _thread_base.thread_state) should be
private to the kernel/scheduler, so flags previously stored there are
moved to _thread_arch where the belong.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is a naive implementation which does "eager" context switching
for floating-point context, which, of course, introduces performance
concerns. Other approaches have security concerns, SMP implications,
and impact the x86 arch and Zephyr project as a whole. Discussion is
needed, so punting with the straightforward solution for now.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
First "complete" version of Intel64 support for x86. Compilation of
apps for supported boards (read: up_squared) with CONFIG_X86_LONGMODE=y
is now working. Booting, device drivers, interrupts, scheduling, etc.
appear to be functioning properly. Beware that this is ALHPA quality,
not ready for production use, but the port has advanced far enough that
it's time to start working through the test suite and samples, fleshing
out any missing features, and squashing bugs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This patch adds basic build infrastructure, definitions, a linker
script, etc. to use the Zephyr and 0.10.1 SDK to build a 64-bit
ELF binary suitable for use with GRUB to minimally bootstrap an
Apollo Lake (e.g., UpSquared) board. The resulting binary can hardly
be called a Zephyr kernel as it is lacking most of the glue logic,
but it is a starting point to flesh those out in the x86 tree.
The "kernel" builds with a few harmless warnings, both with GCC from
the Zephyr SDK and with ICC (which is currently being worked on in
a separate branch). These warnings are either related to pointer size
differences (since this is an LP64 build) and/or dummy functions
that will be replaced with working versions shortly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some definitions may be shared between subarchitectures, so refactor
accordingly. The definitions are also modified to separate bits. A
placeholder is created for the Intel64 definitions.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
