The callee-saved-registers can be helpful to debug the state of
a core upon an exception, however, currently there's no way to
access that information in user-implemented
`k_sys_fatal_error_handler()`, even though the csf is already stored
in the stack.
This patch conditionally add a `csf` member in the `arch_esf` when
`CONFIG_EXTRA_EXCEPTION_INFO=y`*, which the `_isr_wrapper` would update
when a fatal error occurs before invoking `z_riscv_fatal_error_csf()`.
Functions such as `k_sys_fatal_error_handler()` would then be able
to access the callee-saved-registers at the time of exception via
`esf->csf`.
* For SoCs that select `RISCV_SOC_HAS_ISR_STACKING`, the
`SOC_ISR_STACKING_ESF_DECLARE` has to include the `csf` member,
otherwise the build would fail.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Created `GEN_OFFSET_STRUCT` & `GEN_NAMED_OFFSET_STRUCT` that
works for `struct`, and remove the use of `z_arch_esf_t`
completely.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
It looks like some soc_offsets.h files need to be included before
kernel_offsets, otherwise there are some header race conditions due to
the infamous soc.h. This problem is exposed if all soc.h are removed
from RISC-V arch header files (see the upcoming commits). It can be
reproduced by building rv32m1_vega_ri5cy board after applying all the
patches in this series (excluding this one, of course).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
FPU context switching is always performed on demand through the FPU
access exception handler. Actual task switching only grants or denies
FPU access depending on the current FPU owner.
Because RISC-V doesn't have a dedicated FPU access exception, we must
catch the Illegal Instruction exception and look for actual FP opcodes.
There is no longer a need to allocate FPU storage on the stack for every
exception making esf smaller and stack overflows less likely.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Currently it is assumed that Zephyr CPU numbers match their hartid
value one for one. This assumption was relied upon to efficiently
retrieve the current CPU's `struct _cpu` pointer.
People are starting to have systems with a mix of different usage for
each CPU and such assumption may no longer be true.
Let's completely decouple the hartid from the Zephyr CPU number by
stuffing each CPU's `struct _cpu` pointer in their respective scratch
register instead. `arch_curr_cpu()` becomes more efficient as well.
Since the scratch register was previously used to store userspace's
exception stack pointer, that is now moved into `struct _cpu_arch`
which implied minor user space entry code cleanup and rationalization.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The tp (x4) register is neither caller nor callee saved according to
the RISC-V standard calling convention. It only has to be set on thread
context switching and is otherwise read-only.
To protect the kernel against a possible rogue user thread, the tp is
also re-set on exception entry from u-mode.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
In order to bring consistency in-tree, migrate all arch code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Set TP in exception context so that it gets loaded into the CPU when
first running the thread. Set TP for secondary cores to related idle TLS
area.
Signed-off-by: Keith Packard <keithp@keithp.com>
Stop using &_kernel as this is not SMP friendly. Let's use s0 (after
preserving its content) to hold ¤t_cpu instead so it won't have
to be reloaded each time it is needed. This will be even more relevant
when SMP support is added.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The move to arch_switch() is a prerequisite for SMP support.
Make it optimal without the need for an ECALL roundtrip on every
context switch. Performance numbers from tests/benchmarks/sched:
Before:
unpend 107 ready 102 switch 188 pend 218 tot 615 (avg 615)
After:
unpend 107 ready 102 switch 170 pend 217 tot 596 (avg 595)
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This is a per-thread register that gets updated only when context
switching. No need to load and save it on every exception entry.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The minimum stack alignment is 16. Therefore, the stack space to store
a struct __esf object must be rounded up to the next 16-byte boundary.
It is not sufficient to do the rounding on the __z_arch_esf_t_SIZEOF
definition. When the stack is constructed in arch_new_thread() it is
also necessary to do the rounding there too.
Let's make the structure itself carry the alignment attribute instead to
make it work in all cases.
While at it, remove the unused _K_THREAD_NO_FLOAT_SIZEOF definition.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Complete revamp of the exception entry code, including syscall handling.
Proper syscall frame exception trigger. Many correctness fixes, hacks
removal, etc. etc.
I tried to make this into several commits, but this stuff is all
inter-related and a pain to split.
The diffstat summary:
14 files changed, 250 insertions(+), 802 deletions(-)
Binary size (before):
text data bss dec hex filename
1104 0 0 1104 450 isr.S.obj
64 0 0 64 40 userspace.S.obj
Binary size (after):
text data bss dec hex filename
600 0 0 600 258 isr.S.obj
36 0 0 36 24 userspace.S.obj
Run of samples/userspace/syscall_perf (before):
*** Booting Zephyr OS build zephyr-v3.0.0-325-g3748accae018 ***
Main Thread started; qemu_riscv32
Supervisor thread started
User thread started
Supervisor thread(0x80010048): 384 cycles 509 instructions
User thread(0x80010140): 77312 cycles 77437 instructions
Run of samples/userspace/syscall_perf (after):
*** Booting Zephyr OS build zephyr-v3.0.0-326-g4c877a2753b3 ***
Main Thread started; qemu_riscv32
Supervisor thread started
User thread started
Supervisor thread(0x80010048): 384 cycles 509 instructions
User thread(0x80010138): 7040 cycles 7165 instructions
Yes, that's more than a 10x speed-up!
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This reverts commit 8686ab5472.
The purpose of this commit will be reintroduced later on top of
a cleaner codebase.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
isr.S code currently gets CPU information from global `_kernel` assuming
there's only one CPU. In order to prepare for upcoming SMP support,
change code to actually get current CPU information.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
RISC-V global pointer (GP) register is neither caller nor callee
register, and it's a constant value in the single ELF file. Thus, we
don't need to save/restore GP at ISR enter/exit. Remove it to optimize
context switch performance.
Signed-off-by: Jim Shu <cwshu@andestech.com>
The IRQ handler has had a major changes to manage syscall, reschedule
and interrupt from user thread and stack guard.
Add userspace support:
- Use a global variable to know if the current execution is user or
machine. The location of this variable is read only for all user
thread and read/write for kernel thread.
- Memory shared is supported.
- Use dynamic allocation to optimize PMP slot usage. If the area size
is a power of 2, only one PMP slot is used, else 2 are used.
Add stack guard support:
- Use MPRV bit to force PMP rules to machine mode execution.
- IRQ stack have a locked stack guard to avoid re-write PMP
configuration registers for each interruption and then win some
cycle.
- The IRQ stack is used as "temporary" stack at the beginning of IRQ
handler to save current ESF. That avoid to trigger write fault on
thread stack during store ESF which that call IRQ handler to
infinity.
- A stack guard is also setup for privileged stack of a user thread.
Thread:
- A PMP setup is specific to each thread. PMP setup are saved in each
thread structure to improve reschedule performance.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Nicolas Royer <nroyer@baylibre.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This change adds full shared floating point support for the RISCV
architecture with minimal impact on threads with floating point
support not enabled.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
