In this board, there are eight PWM channels from
EMIOS 0 CH0 --> EMIOS 0 CH7 that can be used to
generate PWM pulse to outside of the board.
Moreover, there are three RGB leds that can use
PWM pins for blinking, faded leds
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
This variable was originally provided for two indended purposes:
* Let users manually add a new image in a desired order in the list.
* Let users set build-only images, which are excluded from the list.
Given the recent additions of the `sysbuild_add_dependencies()` function
and the `BUILD_ONLY` parameter, `IMAGES` should be considered obsolete.
Furthermore, the list of images added to sysbuild should be updated
automatically when calling `ExternalZephyrProject_Add()`. This is now
possible by using a GLOBAL property internal to sysbuild.
With that, the `IMAGES` variable can be removed. Its existing usage for
image ordering is replaced with `sysbuild_add_dependencies()` treewide.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Modify the signature of the k_mem_slab_free() function with a new one,
replacing the old void **mem with void *mem as a parameter.
The following function:
void k_mem_slab_free(struct k_mem_slab *slab, void **mem);
has the wrong signature. mem is only used as a regular pointer, so there
is no need to use a double-pointer. The correct signature should be:
void k_mem_slab_free(struct k_mem_slab *slab, void *mem);
The issue with the current signature, although functional, is that it is
extremely confusing. I myself, a veteran Zephyr developer, was confused
by this parameter when looking at it recently.
All in-tree uses of the function have been adapted.
Fixes#61888.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This sample uses the DEVICE_DT_GET_ONE(COMPAT) to select the ps2 device
for a specific chip. This commit changes it to use the aliases to
let more chips which support the ps2 driver can build this sample.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The XEC clock control driver sample code uses enum indexes to offset to
the desired GPIO CTRL register of the package. These enums are only
used in this example code and are being removed in favor of calculated
indexing into the specific GPIO register memory map.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
This follows the same convention that has already been adopted by Intel
Alder Lake and Raptor Lake boards.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add `yd_esp32` board:
- Model name: YD-ESP32
- Manufacturer: VCC-GND® Studio
- Espressif module: ESP32-WROOM-32E
Signed-off-by: Julio Cesar <hi@jcsx.dev>
This is following the same convention that was recently introduced to Alder
Lake boards (intel_adl). Additionally, an "S" suffix is added to the
boards, since what's currently supported is in fact the Raptor Lake S
variant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove unneeded board configurations since those now selected with
selecting PCH SMBUS driver.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
TC "test_single_shot_alarm_notop" is failing because there were 2 ISR
callbacks instead of one. this is because of invoking
ifx_cat1_counter_set_int_pending incorrectly. Updated
ifx_cat1_counter_set_alarm to fix this
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Since 3a197934fc
main() should be int main(void) instead of void main(void)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add an optional compare buffer to check each byte. If the byte differ
the read value will be printed as an error.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add an optional compare buffer to check if bytes read
match a provided buffer and print an error if they differ.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This board is a relatively inexpensive development kit for USB-PD
controllers, using an UPD301C controller.
This Zephyr config includes support for:
* UART (present on he debug header of the board), tested with the
hello_world sample application;
* the one standalone LED (CAP_MIS), tested with the blinky sample
application;
* the rotary encoder (PDO_SEL), via ADC, tested with the adc sample
application;
* the current sense amplifier (I_SENSE), currently untested;
* the SPI bus, connected internally in the UPD301C to the UPD350;
* the I2C bus, exposed on the debug header, currently untested.
Note that the drivers.uart.async_api.rtt has to be disabled, as it is
for other m0 boards with no dma or it fails to build.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Add support for apollo4p_evb to the counter alarm sample.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
Add overlays for esp32s2, esp32s3, esp32c3 based boards, which
has RGB led assembled. Those boards are capable of driving the
RGB led using SPI. The default MOSI idle level is different
to how DI driver expect it to be.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Some boards may have less LED child nodes in the DT than the maximum
number of LEDs supported by the chipset. For these boards, the channel
test must skip the missing LEDs when preparing the color buffer and not
exit in error due to missing info.
Also, some boards may have a color mapping that is different from RGB
and this mapping should be used when providing the buffer to
led_set_color().
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
Add support for LP5009, LP5012, LP5018 and LP5024 devices which only
differ by the number of LEDs they can control.
Also, update application sample to run on all these new supported
devices.
Based on initial work from:
- Marek Janus <marek.janus@grinn-global.com>
- Rico Ganahl <rico.ganahl@bytesatwork.ch>
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
This watchdog doesn't allow to stop on CPU halt by debugger.
It also requires a minimum window value different than zero
so that the watchdog is refreshed during the open window.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Enable all channels that available connector on board.
ADC0 channel 6 on precision group with normal end chain
callback.
ADC1 channel 2 on precision group with normal end of
conversion callback.
ADC2 channels 3, 4, 5 on precision group with normal end
of conversion callback.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Add initial version of Infineon CAT1 counter driver
Add initial version of binding file for Infineon
Add counters to psco6 dtsi
Add external trigger pin that runs counter
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add sample to demonstrate usage of IS31FL3733 LED using the LED API.
This led matrix controller has several custom APIs to expose
functionality not available within the standard led API, such as
limiting LED current.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
To demonstrate how to configure Zephyr to use the IPM
driver over the IVSHMEM subsystem. Since this driver
is intended to generate inter QEMU VM notifications
it was better to create a sample app using the shell
for quick demonstration for the users.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
During testing I've found one bad path and looked if
there is more.
I've used this oneliner to find more:
```
rg :zephyr-app: | awk '{ print $3 }' | while read dir
do
test -d $dir || echo $dir
done | grep '^samples' | grep -v '<' | sort | uniq
```
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
Convert the GT911 driver to the input subsystem, fix the existing boards
to work in the default config.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Enable logging by default in kscan sample, so that user will see output
even if they do not have a keyboard connected that follows the keymap.
Add a specific testcase for boards that support the RK055HDMIPI4M
display.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove display definition from RT595 EVK, as this is now supported by
the shield. Add gpio nexus for the FFC connector on this EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
