Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
BlueZ stack in Linux distributions use disable all
advertising sets when advertising is turned off.
Add missing implementation to support disabling all
active advertising sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rework internal header files to not have includes, rather
have the required includes in the c source files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to have clean, self-contained HCI headers that do not have any
dependencies towards the Host or any other part of the system (except
types), reorganize the headers in the following way:
- Split out the macros and structs from hci.h to a new hci_types.h
- Merge the existing hci_err.h into the new hci_types.h
Fixes#58214.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Up until now, it has not been possible to reconfigure a CIG and its
CISes after initial configuration, without first removing the CIG.
With this commit, le_set_cig_parameters allows the following
reconfiguration operations in configuration state:
- Set new CIG configuration parameters on existing CIG
- Iteratively configure single CIS (of more CISes)
- Increment number of CISes via multiple configuration calls
- Keep handle- and CIS_ID relation
Changes:
- Pass handles in le_set_cig_parameters from ll_cig_parameters_commit
via output variable.
- Implement CIG state variable instead of 'started', with states
IDLE/CONFIGURABLE, ACTIVE and INACTIVE.
- Implement ll_conn_iso_stream_get_by_id for easier access to specific
CIS.
This fixes the following CIS Central EBQ tests:
- HCI/CIS/BI-10-C
- HCI/CIS/BI-11-C
- HCI/CIS/BI-13-C
- HCI/CIS/BV-05-C
Signed-off-by: Morten Priess <mtpr@oticon.com>
To enable Bluetooth controller coexistence feature, there is
implementation of ticker task, which aborts any ongoing radio events
during assertion of the grant pin. This solves the co-existence issue
in the role of the subordinate transceiver.
Signed-off-by: Tomáš Beneš <tomas@dronetag.cz>
Avoid the use of weak functions and call the respective functions only
if vendor-specific data path is supported. The weak dummy functions
will not implement the desired behavior anyway. This change makes it
explicit that these functions need to be implemented by the vendor.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
The Bluetooth 5.4 specification was recently released, and has a new
version identifier (0x0D or decimal 13) assigned to it in the
Bluetooth Assigned Numbers.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Redefine mask of host-controlled feature bits to include only features
that are supported by the controller. This fixes a conformance test
failure where setting an unsupported host-controlled feature bit was
not rejected as it should.
Set the Connected Isochronous Streams (Host Support) bit from the host
only if unicast support is configured to avoid failures in
broadcast-only configurations.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Implement HCI commands HCI_Read_Connection_Accept_Timeout and
HCI_Write_Connection_Accept_Timeout, and enable the feature in
supported commands.
Remove hardcoded use of default accept timeout in new LLCP code, and
use configurable value instead.
This makes EBQ test /HCI/CIN/BV-03-C pass.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix issues with referencing invalid netbuf data and add missing
parameter. Removed returning of handle in setup functions, as handles
are not available until commit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adding support for allowing user extension code to support deferring
anchor point moves. Refactored LLCP only.
Note: This is NOT supported by LEGACY LLCP impl.
KConfig'd by BT_CTLR_USER_CPR_ANCHOR_POINT_MOVE
Modified ll_conn_update API, to accommodate passing offsets
Modified CPR/CU context data structure
Modified CPR/CU procedure to handle anchor point move wait state
Fixed up unit tests, adding anchor point move cases to CPR/CU test
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adding controller support for updating SCA in ACL and ISO peripherals
Adding HCI API support for le_request_peer_sca and complete event.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix BT_CTLR_ADV_DATA_LEN_MAX and other Kconfig dependencies,
and clean up the use of PDU_AC_LL_SIZE_MAX which is used to
allocate scratch packet to be atleast able to accommodate
the minimum 31 bytes AD data such that it is sufficient to
transmit and/or receive scan response PDUs when either
broadcaster or observer alone is supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In a Host plus Controller combined build for ISO feature
restrict the maximum ISO Tx PDU size to minimum of 251 bytes
and Host ISO Tx MTU. This will allow controller to use
reduced Tx time (subevent interval).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow the controller to be deinitialized, adding the whole chain of
calls:
- ll_deinit()
- lll_deinit()
- lll_clock_deinit()
in order to be able to turn everything off, including the controller's
refcount of the LF clock.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- ISO TX data path for HCI and support for vendor path
- ISO-AL segmentation of framed PDUs
- Insertion of segment headers
- Reconstruction and storing of CIG reference point in ULL
- Calculation and insertion of of Time-Offset
- Exit error spooling in ISO-AL on detecting start
- ISO-AL TX unframed fragmentation
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix to include ll_adv_cmds_set when broadcast role is not
enabled in the Controller but advertising extensions is
enabled (Extended Scanning is used).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising ADI Support feature bits so that
it is return back in the Read Local Supported Features.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Request interval is a number of connection events that
is used to periodically run CTE request control procedure.
BT 5.3 Core Specification defines it as 2 octets long.
It had wrong type uint8_t. Changed to correct one uint16_t.
The commit also changes type of cte_rsp_en field of lll_df_conn_tx_cfg
to state that it is a boolean flag.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There were missing code responsible for execution of HCI_LE_Connection_-
CTE_Response_Enable HCI command.
The commit adds missing implementation into hci and upper link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Provides interface, data structures and demuxing capability for ISO RX
PDU allocation and transport from LLL to HCI.
Uses the RXFIFO composite for simplicity and reduced overhead.
Signed-off-by: Morten Priess <mtpr@oticon.com>
HCI_LE_Set_Connection_CTE_Transmit_Parameters host command was
not completely implemented in controller. There were missign
storage of TX parameters in ll_conn instance.
The commit adds missing part of the command handling.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Limit the maximum ACL Tx buffer size to 251 octets due to
implementation restricted use of uint8_t for PDU len field,
also used as the Tx buffer size data type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pushes all work done in the topic-ble-llcp branch into main branch
This is a refactoring of the LL control procedures; the refactored
control procedures are hidden behind a KConfig option and
per default disabled
Goal of the refactoring:
close issue Link Layer Control Procedure overhaul #15256
make it easier to add/update control procedures
Refactoring consists in principal of writing explicit state machines
for the control procedures.
To reduce the risk of regression errors unit-tests have been added
Following control procedures are implemented:
Connection update procedure
Channel map update procedure
Encryption procedure
Feature exchange procedure
Version exchange procedure
ACL termination procedure
Connection parameters request procedure
LE Ping procedure
Data Length Update procedure
PHY update procedure
Min. nr. Of channels used procedure
Constant Tone extension request procedure
This is a joined work by the people listed in the signed-off-by
list (in alphabetical order)
Signed-off-by: Andries Kruithof Andries.Kruithof@nordicsemi.no
Signed-off-by: Erik Brockhoff erbr@oticon.com
Signed-off-by: Piotr Pryga piotr.pryga@nordicsemi.no
Signed-off-by: Szymon Janc szymon.janc@codecoup.pl
Signed-off-by: Thomas Ebert Hansen thoh@oticon.com
Signed-off-by: Tommie Skriver tosk@demant.com
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Implement support for Periodic Advertiser List to be used
in LE Periodic Advertising Create Sync command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Have separate Bluetooth Device address get and read
functions, remove use of function just to return Extended
Advertising Random address and replace with simple
assignment statement.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the old master and slave prefixes with the new central and
peripehral ones from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix maximum radio packet size configuration to use 255 bytes
for Extended Scanning and Periodic Synchronization.
Add a Kconfig option so that application can reduce RAM
usage if a specific user scenario can live with smaller PDU
receptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add functions that handle enable CTE request control procedure
request from host.
Implementation of ll_df_set_conn_cte_req_enable in ULL is partial.
It will be integrated with refactored implementation of control
procedures.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Set_Connection_CTE_Receive_Parameters handling is required to
enable sampling of Constant Tone Extension in connected mode.
The commit adds handling for HCI_LE_Set_Connection_CTE_Receive_-
-Parameters command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add features: connection CTE request, connection CTE response
and receiving constant tone extensions; to HCI and features
supported by controller.
The features are not enabled yet.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Replace the use of LL_FEAT define with ll_feat_get() so that
feature set value can be updated at runtime with host
feature bit values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added Kconfig option to configure the maximum Broadcast and
Synchronized Receiver ISO PDU length.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add connectionless CTE RX feature to list of features supported
by controller. Add direction finding initialization in hci_core
if the feature is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add function that enables or disables CTE sampling attached to received
periodic advertising PDUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Reorder Channel Selection Algorithm #2 and Minimum Number of
Used Channels Procedure bits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix flash driver sync regression introduced due to changed
default ULL_HIGH in the commit 30634334a8 ("Bluetooth:
controller: Fix ULL_HIGH priority to be lower than LLL").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use `#if defined(...)` instead of `#if IS_ENABLED(..)` when
conditional compilation of definitions in source code.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
