Support setting MAC address manually at runtime for Atmel SAM Ethernet
driver. The MAC address can be set using an ethernet management
request, e.g. (`net_mgmt(NET_REQUEST_ETHERNET_SET_MAC_ADDRESS, ...)`).
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
After the commit c1f7b9f45a ("net: l2: ethernet: fix k_work API usage
in carrier on/off handling") each ethernet interface (including DSA
ports) shall first call ethernet_init() before carrier_on_of() function
is called.
As DSA ethernet interfaces (lan{123}) have their own k_work item to
monitor the carrier status (by reading switch IC registers), it was
necessary to move functions, which initialize it after the code which
sets up necessary interfaces (i.e. call ethernet_init(iface)).
In that way the error when accessing uninitialized members of ethernet
context is avoided.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If return value is negative (failed) then log the error with a
message.
Coverity-CID: 219519
Fixes#32927
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Either get priority from devicetree (liteeth) or remove Kconfig symbols
that aren't used anywhere for IRQ priority (gecko, stm32_hal).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit verifies if the mac configuration is done correctly
during liteeth setup, and prompts a warning when not.
Signed-off-by: Pawel Sagan <psagan@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This commit eliminates an inifite waiting for the TX ready flag
in the eth liteeth driver, exiting with error after a defined
number of attempts.
Signed-off-by: Pawel Sagan <psagan@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This patch adds support for Microchip's KSZ8794 DSA device, which for
switch and PHY control uses SPI communication.
This driver also provides support for handling tail tagging added and
decoded in the KSZ8794 device as well as modifying entries in the
static MAC address table.
It is also possible to use GPIO pin to reset KSZ8794 switch.
When the "reset-gpios" property is not defined, software based reset
is performed instead.
The KSZ8794 can now be used on boards which have SPI CS only available
as GPIO pin.
Signed-off-by: Stefan Bigler <stefan.bigler@securiton.ch>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After the change SHA1: 3498d43784 the
local-mac-address property is no longer parsed correctly when it is
defined in the '&enet` DTS node on k6x SoCs (e.g. frdm_k64f and
ip_k66f).
The problem is with value to which the
NODE_HAS_VALID_MAC_ADDR(DT_DRV_INST(n)) macro is resolved.
If the 'local-mac-address' is present it returns
'(!((0 == 0) && (0 == 0) && (18 == 0) && (19 == 0) && (0 == 0) && \
(16 == 0)))' [*], otherwise it is 0.
As COND_CODE_{01} only accepts 0 or 1 as its first argument, it all
worked until the 'local-mac-address' was not defined. When present
the first argument to COND_CODE_{01} macro was [*] and it caused
build break.
Fixes issue: #30354https://github.com/zephyrproject-rtos/zephyr/issues/30354
Signed-off-by: Lukasz Majewski <lukma@denx.de>
After the commit SHA1: 370d02743a the
alias for 'eth' was removed. As a result DT_ALIAS(eth) for the mcux
enet driver was not providing a valid DTS node reference.
As a result the 'fixed-link' child node property was not recognized at
all.
The 'enet' is a valid DTS label for mcux enet driver, so lets use it
instead.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
currently pcie_get_mbar only returns the physical address.
This changes the function to return the size of the mbar and
the flags (IO Bar vs MEM BAR).
Signed-off-by: Maximilian Bachmann <m.bachmann@acontis.com>
When setting the MAC address, the ethernet driver has to call
net_if_set_link_addr() with the updated address. This was missing and is
added now.
See e.g.
https://github.com/zephyrproject-rtos/zephyr/pull/28874
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Reworks the mcux ethernet driver to use DT_INST_FOREACH_STATUS_OKAY and
eliminate a lot of duplicate code between instance 0 and instance 1.
Renames the ERR_MISC interrupt to ERR due to an issue with the
underscore in the device tree preprocessor macros.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for configuring Ethernet pins using DT pinctrl entries. Note
that F1 series pinctrl support is not handled as the driver does not
support F1.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
1. Merged the single/multiple ring(s) APIs, now these APIs
can handle both which requires passing a ring id.
2. Updated timestamp handling to match the new timestamp
implementation in the SDK driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
With STM32Cube updates
https://github.com/zephyrproject-rtos/hal_stm32/pull/75
'..._hal_rcc.c' and '..._hal_rcc_ex.c' are now systematically
compiled, due to more and more dependencies from HAL IP on rcc.
So USE_STM32_HAL_RCC and USE_STM32_HAL_RCC_EX becomes useless.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
z_tick_get returns signed int. Adapt comparision
statement for remaining time computation.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
If neither a random address nor a specific local address is in the
device tree, then use the MAC address from the device information page.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
Do not override OUI of the local MAC address in the devicetree.
Simplify the mac address assignment conditions. Each interface has
its own function. Code duplication will be eliminated with the
use of DT_INST_FOREACH_STATUS_OKAY in a later commit to completely
remove duplicated code.
The 3 possible MAC address assignment (local, random and unique)
are covered and have been tested.
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
This fixes wrong value for i.MX RT.
This is one less hard-coded value in eth_N_context structures.
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
This allows setting the MAC address at run time.
Signed-off-by: Antoine Zen-Ruffinen <antoine@riedonetworks.com>
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Initialize device pointer in driver's context.
It was not done quite right in commit a1708cf2f2
("drivers: ethernet: Fix device instance const qualifier loss"),
and then completely removed in commit 113d9274ea
("drivers: ethernet: remove stray expression")'
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The correct return value is -ENOBUFS if we run out of network
buffers when sending the packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An unnecessary expression that doesn't compile was inadvertently
introduced in the device constification PR. Remove it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
