Similar to what is done in pm_device_runtime_get,
we don't need to wait the device be suspended if
the work is still in the work queue. In this case
we just cancel the work and update the device state
to active.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The only difference in the two enums are some entries related to
relocation sections. However, these entries are not used in the
code, so they can be safely removed, along with the mapping function.
Use LLEXT_MEM_* to avoid confusion with low-level "section" names.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Increases 2 variables to be 16-bits instead of 8-bits to allow
for target read sizes, this would only be an issue if someone
changed the default retention block size from the default value
of 16 to a value over 256
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When using multiple instances of IPC static vring, each instance
should register its shared memory with a unique name.
Instead of a predefined default name, the name of the ipc instance
is reused for the metal device name.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
The dummy L2 layer does not implement any L2 functionality
but it does not mean that it should not implement start/stop
functions that are called when the related network interface
is brought up or taken down.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is pointless to take net interface up if the underlaying
device is not ready. Set also the interface status properly
in this case.
Fixes#65423
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use correct format specifier for LOG_ERR in lwm2m_obj_device.c. The
previously used format specifier of %u was correct for 32 bit systems
but would produce a build warning for 64 bit systems.
Fixes#66441
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This starts using CONTAINER_OF macro instead of inst_by_conn function
wherever possible. It's better approach as the client instance is
a container for parameters passed to the callbacks.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
As the common.h is only meant to be used by the network
shell files, rename it to be more descriptive in order to
avoid possible conflicts with any other common.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Usually we want set all values of code triple Base Class, SubClass, and
Protocol at once. Merge existing functions to set code, subcode,
protocol into just one helper to set code triple.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Targets that have a data cache must enable CACHE_MANAGEMENT to allow the
llext API to flush it when loading an extension. This patch forces the
flag to be enabled when the target has a data cache.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The arch_* functions are architecture-specific and may not be defined in
all targets. Use the global alias defined in the Cache API instead.
Fixes#66382.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Renames "prov device" references and options to
"provisionee" to align implementation with Mesh
Protocol specification v1.1, section 5.4.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Calling the registered receive callback when releasing TCP context
doesn't make sense, as at that point the application should've already
closed the associated socket (that's one of the conditions for the
context to be released). Therefore, remove the pointless receive
callback call, while keeping the loop to unref any leftover data packets
(although again, I don' think there should be any packets left at that
point, as they're all consumed in tcp_in()).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
While improving thread safety of the TCP stack I've introduced a
possible deadlock scenario, when calling tcp_conn_close() in tcp_in().
This function shall not be called with connection mutex locked, as it
calls registered recv callback internally, which could lead to deadlock
between TCP/socket mutexes.
This commit moves the tcp_conn_close() back where it was originally
called. I've verified that the thread safety is still solid with the
test apps used originally.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This fixes the return error code for Preset Write operation that shall
be returned when preset is not writable (or disabled via Kconfig like in
this case).
As per HAS_v1.0; 3.2.2.3 Write Preset Name operation
"If the Writable bit in the Properties field of the preset record which
is identified by the Index parameter is set to 0b0, then the server
shall return an ATT_ERROR_RSP PDU to the ATT_WRITE_REQ PDU with
the Error Code parameter set to Write Name Not Allowed."
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This avoids unexpected assert that may happen when the client tries to
QoS configure ASE that is in state which does not allow to be configured.
In such case the assert shall not be not be triggered, as it's not stack
fauly. The assert check has been moved after the state check, so the ASCS
implementation will just return an error code to the client.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes CCC subscriptions that were removed if the automatic
resubscription was aborted by ACL disconnection.
As the client renews subscriptions, there is no point of removing those
if the link is disconnected unexpectedly.
The API user won't be notified about the failure, as the automatic
resubscriptions are implicit, and after reconnection the subscriptions
will be still valid.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Addresses a potential issue when the string contains only '\0',
which results in z_shell_strlen(str) returning len as 0.
Since the for-loop expects len >= 1, the function now immediately
returns when len == 0.
As the null check for 'str' is already handled inside
z_shell_strlen(), an additional check for 'str' is not needed.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add an interface to verify and enable a test mode. The test mode
selected in the SetFeature control request must be verified to be
supported by the controller and enabled after the status stage is
completed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Not all device controllers expect the device address to be set after the
status stage. Add support to directly set a new device address without
waiting for the control request status stage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
fs_rename can handle the file move atomically without unlinking
the file first if the filesystem supports that. This change makes
the settings file more power cut resilient so that the whole
settings file is not lost with poorly timed power cut.
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
Add empty macro for net_if_mon functions if they are not otherwise
defined, like the other functions in the net_if.c file have.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
EAGAIN error is returned if the tcp window size is full. Retry
sending the packet instead of closing the connection if this
error occurs.
Also the full payload may not be sent in a single call to
net_context_send(). Keep track of the number of bytes remaining
and try to send the full payload.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Add a delay parameter to asynchronous device runtim put. This allows
to delay the put operation what is useful to avoid multiple states
transitions.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
We don't need to wait an async put to happen in case it has not
started yet. In this case we can simply cancelling the pending work
and change the internal state because the device is still active.
This way we avoid a suspend and resume cycle.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add new functions to the public CoAP API to configure CoAP packet
retransmission settings. Application may need to re-configure the
settings for example when cellular modem changes connection from
LTE-M to NB-IoT or vice versa.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
This fixes issue where API use is able to register writable preset even
if the CONFIG_BT_HAS_PRESET_NAME_DYNAMIC Kconfig option was disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Use a flag in `c:struct:mgmt_handler` to skip the cbor start and end byte,
and instead use pure custom user defined payload.
Signed-off-by: Kuno Heltborg <kunoh@live.dk>
Add the GMAP shell module with support for running the
various audio configurations in an easy way.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add initial implementation of Gaming Audio Profile (GMAP).
This is a top layer profile in the LE Audio stack,
designed for low latency audio ideal for gaming.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The number of Kconfig options for the TCP stack grew considerably,
therefore it makes sense to move them to a separate file not to bloat
the Kconfig file with generic networking options.
Take this opportunity to reorder TCP options, so that protocol
parameters (timings/buffer sizes) are not mixed up with optional
protocol features (fast retransmit/congestion avoidance etc.).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When a TCP connection is established, if there is no data exchange
between the two parties within the set time, the side that enables
TCP Keep-alive will send a TCP probe packet with the same sequence
number as the previous TCP packet. This TCP probe packet is an empty
ACK packet (the specification recommends that it should not contain
any data, but can also contain 1 nonsense byte, such as 0x00.). If
there is no response from the other side after several consecutive
probe packets are sent, it is determined that the tcp connection has
failed, and the connection is closed.
The keep-alive default parameters are aligned with Linux defaults.
Signed-off-by: Horse Ma <mawei@coltsmart.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If observed resource was written during the pMin period, it did
not schedule any wake-up event into the future. Notify message would
then only be generated as a result of any other (like Update) event.
Refactor check_notifications() to follow same pattern as retransmit_req().
Return the next event timestamp, which could be now.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The bt connect and bt connect-name commands should only
attempt to connect to connectable devices that we are not
already connected to.
This commit moves the check for BT_GAP_ADV_PROP_CONNECTABLE
as well as checks that we do not already have a connection
to that device with the current ID.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use helper function to convert string to int for appearance value.
This makes the code more clear, as the big-endian conversion function
gives the wrong impression about the byte order of advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The 2 issues were found after CONFIG_OSDP_SC_ENABLED was enabled:
- missing curly brace after if
- typo in type name
Signed-off-by: Arkadiusz Wadowski <wadowski.arkadiusz@gmail.com>
Added missing command and message handling for use existing
modem cmux for DCE role.
DCE CMUX connection can be now initialized from DTE side.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Add a "input kbd_matrix_state" shell command. This prints the state of
a keyboard matrix in a much more compact representation than the normal
input event dump, but also keeps track of any key seen during the
execution and reports that on the "off" command. The output can be used
to help setting the actual-key-mask property.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
SNTP response is not analyzed for uncertainty, and no uncertainty is given
to the `struct sntp_time` returned. Fix it with a Kconfig option that adds
optional SNTP uncertainty and timestamp fields in SNTP time struct, and
calculates these when parsing the response.
Adds two helper functions to convert Q16.16/Q32.32 in seconds to `int64_t`
in microseconds to facilitate this.
Also changes combined `lvm` field in `struct sntp_pkt` to bit-fields
`li`, `vn`, and `mode`.
Signed-off-by: Jasper Smit <git@jrhrsmit.nl>
