In zephyr_hostapd_init, calls net_if_get_wifi_sap to get the SAP iface,
it means mgd iface of SAP type is registered before zephyr_hostapd_init.
Actually the mgd iface of SAP should be called in iface_api.init phase.
Therefore, remove unnecessary register of mgd iface in hostapd init.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
There are currently four types of roaming, 11r roaming, 11v roaming, 11k
roaming and legacy roaming, The priority of the roaming mode is
11r-->11v-->11k-->legacy roaming. If the ap does not support 11r/11v/11k
roaming, we will use legacy roaming. legecy roaming needs to do
full channel scan, which is the same as the general scan connection
process, so the legacy roaming time will be longer.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
1.everytime ap wpa3 sae enable command will increase the sae_passpharse
list of config_bss, and sae_derive_pt will derive all sae pt in the
sae_passpharse list, every sae derive pt spend 100ms.
2.with the time going, the sae_passpharse list has more sae, and the
time to derive pt for sae will become long, sae_derive_pt will held
cpu and doesn't sleep.
3.hostapd task prio is 3, and imu task is 3, hostapd task run before
imu task, when the imu interrupt arrive and wake up the imu task, imu
task can't run,
4.hostapd task is deriving pt for every sae in the sae_passpharse
list. imu task can't run and sleep rwlock can't be release, sleep
rwlock timeout is 3s, when derive pt spend over 3s, wlcmgr task
waiting command resp on sleep rwlock will assert and hang.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
Enable WPS PIN expire timeout parameter, this helps us in cleanup of
the Authorized MAC IE in the beacon in case no peer is connected
within the timeout.
Without this parameter the IE is not removed from the beacon.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
1) Unless ACS is being used, both "channel" and
"vht_oper_centr_freq_seg0_idx" parameters must be set.
Fixed "channel center segment 0" not being set in VHT Operation IE.
2) Set HT capabilities and VHT capabilities via the wifi ap config command.
3) Set AP bandwidth to wifi driver via the wifi_mgmt_api->ap_config_params.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
The signature of callback and the callback function is now changed, so,
add a wrapper to convert b/w them.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Added hw_mode check of AP with hostapd when getting link mode of current
station. If the hw_mode of AP is 11b, then the link mode of current
station will show 11b.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
This reverts commit ec0b9ccbc1.
This commit has two issues:
1. We already query signal poll just above, so, wastes time querying the
infor from the firmware.
2. Doesn't handle modes, i.e., queries even for AP mode as well.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for sap.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
The format specifier for size_t is zu.
Using d only works when int and size_t are the same
underlying type which is not the case for 64bit systems,
which leads to a build warning in this case.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Added new ops and events in glue layer to support roaming.
Added new flag WIFI_NM_WPA_SUPPLICANT_ROAMING to control roaming
feature.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Even if the enum contains the same values, the values might
change if the wpa_supplicant sources change or Zephyr values
change. In order to avoid weird errors later and prevent the
following warning, add a conversion functions for the enums.
modules/hostap/src/supp_api.c:1172:23: warning: implicit conversion
from enumeration type 'enum mfp_options' to different enumeration
type 'enum wifi_mfp_options' [-Wenum-conversion]
status->mfp = ssid->ieee80211w; /* Same mapping */
modules/hostap/src/supp_api.c:1190:30: warning: implicit conversion
from enumeration type 'enum wpas_mode' to different enumeration
type 'enum wifi_iface_mode' [-Wenum-conversion]
status->iface_mode = ssid->mode;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "enum wpa_msg_type" was not found by default so add needed
include files to get the definitions.
modules/hostap/src/supp_main.h:61:57: warning: ‘enum wpa_msg_type’
declared inside parameter list will not be visible outside of
this definition or declaration
61 | void wpa_supplicant_msg_send(void *ctx, int level,
enum wpa_msg_type type,
const char *txt,
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Both the supplicant_set_btwt() and supplicant_ap_bandwidth() are
not found in Zephyr sources so remove them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In "connect" all networks are removed and new network is always added,
but in disconnect the network isn't deleted, so, the memory is
unnecessarily held till next connect. This is not exactly a leak, but if
someone profiles using "kernel heap" then this can be construed as a
leak.
Fix this by removing network during the disconnection (for now "all") so
that the memory can be used by someone else.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for station.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Fix DPP build error when HOSTAPD enabled and DPP disabled.
Guard hapd_dpp_dispatch in both CONFIG_WIFI_NM_WPA_SUPPLICANT_DPP
and CONFIG_WIFI_NM_HOSTAPD_AP.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
When try to start SAP on channel 12 with region code US, the channel
check will fail and calls supplicant_send_wifi_mgmt_ap_status() with
iface->owner is NULL, which causes DUT hang. Set iface->owner when
enable the SAP can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Enterprise security doesn't have either SAE or PSK, so, using a blanker
else throws a false warning. Fix the checks to proper handler enterprise
mode.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Enabling all EAP types for enterprise mode increases
memory usage in both ROM and RAM. Provide config options for each
type to let solutions choose the methods based on their
requirements.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
The format of wpa_passphrase and sae_password is wrong when start the
SAP, which leads the invaild MIC check error when other STA try to
connect in security mode. Change the wrong format can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
This was we can modify it in a single place that works both for native
and OS specific code.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The previous NET_EVENT_SUPPLICANT_CMD_INT_EVENT is from
"enum net_event_supplicant_cmd" but the supplicant_send_wifi_mgmt_event()
has the event parameter as an "enum net_event_wifi_cmd" and those event
number spaces are different.
This meant that the wrong event value NET_EVENT_SUPPLICANT_CMD_INT_EVENT
maps to NET_EVENT_WIFI_CMD_TWT (from "enum net_event_wifi_cmd") which
fortunately did not cause issue in this case because the
supplicant_send_wifi_mgmt_event() has no handling for this TWT event value.
It is important we fix this as this can cause great confusion in the
future.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Using a separate workqueue causes issues without any special locking to
synchronize with networking threads e.g., interface being removed while
the workqueue is trying to synchronize with WPA supplicant.
It's easier to use the net_mgmt thread which is in better sync with
networking.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case of error conditions post successfully sending the message, the
event is already freed but we attempt to free it again.
Rejig the labels to easily reflect thier purpose.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When an event is sent the receiver gets is asynchronously and hence is
responsible for free the event, the sender should only free in case of
error conditions i.e., unable to send.
Else, this causes a tough to debug double-free.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case WPA supplicant disabled DPP, we need to compile out the
corresponding DPP code in Wi-Fi shell too.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The security check case statements were in frequency band
setting checks. This is totally wrong and will cause compiler
warnings. Moving the checks to correct function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
