In Kconfig, already check both dpp and enterprise mode for enable
NO_CONFIG_BLOBS, so remove the wrong one in the cmakelist.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
In zephyr_hostapd_init, calls net_if_get_wifi_sap to get the SAP iface,
it means mgd iface of SAP type is registered before zephyr_hostapd_init.
Actually the mgd iface of SAP should be called in iface_api.init phase.
Therefore, remove unnecessary register of mgd iface in hostapd init.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
There are currently four types of roaming, 11r roaming, 11v roaming, 11k
roaming and legacy roaming, The priority of the roaming mode is
11r-->11v-->11k-->legacy roaming. If the ap does not support 11r/11v/11k
roaming, we will use legacy roaming. legecy roaming needs to do
full channel scan, which is the same as the general scan connection
process, so the legacy roaming time will be longer.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
We have now fully migrated to CRYPTO_ALT which is a superset, so, remove
unused CRYPTO module and it's related files.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add the PSA_WANT_XXX settings that might be needed for various crypto
algorithms and Keys in WIFI_NM_WPA_SUPPLICANT_CRYPTO_MBEDTLS_PSA
configuration setting.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
1.everytime ap wpa3 sae enable command will increase the sae_passpharse
list of config_bss, and sae_derive_pt will derive all sae pt in the
sae_passpharse list, every sae derive pt spend 100ms.
2.with the time going, the sae_passpharse list has more sae, and the
time to derive pt for sae will become long, sae_derive_pt will held
cpu and doesn't sleep.
3.hostapd task prio is 3, and imu task is 3, hostapd task run before
imu task, when the imu interrupt arrive and wake up the imu task, imu
task can't run,
4.hostapd task is deriving pt for every sae in the sae_passpharse
list. imu task can't run and sleep rwlock can't be release, sleep
rwlock timeout is 3s, when derive pt spend over 3s, wlcmgr task
waiting command resp on sleep rwlock will assert and hang.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
Enable WPS PIN expire timeout parameter, this helps us in cleanup of
the Authorized MAC IE in the beacon in case no peer is connected
within the timeout.
Without this parameter the IE is not removed from the beacon.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
1) Unless ACS is being used, both "channel" and
"vht_oper_centr_freq_seg0_idx" parameters must be set.
Fixed "channel center segment 0" not being set in VHT Operation IE.
2) Set HT capabilities and VHT capabilities via the wifi ap config command.
3) Set AP bandwidth to wifi driver via the wifi_mgmt_api->ap_config_params.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
The signature of callback and the callback function is now changed, so,
add a wrapper to convert b/w them.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
MbedTLS Crypto ALT implementation clearly states that DPP3 isn't
supported, remove DPP3 to fix a build error related to HPKE.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These files are now unconditiaonlly included, the defines within the
file takes care of both enable and disable of the feature.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Added hw_mode check of AP with hostapd when getting link mode of current
station. If the hw_mode of AP is 11b, then the link mode of current
station will show 11b.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
This reverts commit ec0b9ccbc1.
This commit has two issues:
1. We already query signal poll just above, so, wastes time querying the
infor from the firmware.
2. Doesn't handle modes, i.e., queries even for AP mode as well.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
To make AP related code/config more clear and clean, use
CONFIG_WIFI_NM_WPA_SUPPLICANT_AP for supplicant based AP case,
and use CONFIG_WIFI_NM_HOSTAPD_AP for hostapd based AP case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for sap.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Add an option for platforms or forks to provide their own hostap
compatible crypto implementation. This may include proprietary or
platform specific stuff that may or may not be upstreamed to Zephyr.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The format specifier for size_t is zu.
Using d only works when int and size_t are the same
underlying type which is not the case for 64bit systems,
which leads to a build warning in this case.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The aes_unwrap() and aes_decrypt() functions were missing
if CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE is enabled.
Add missing C files to fix this.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new ops and events in glue layer to support roaming.
Added new flag WIFI_NM_WPA_SUPPLICANT_ROAMING to control roaming
feature.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
WPA control interface timeout is hardcoded to 10s, add a configuration
option to remove the hardcode, this is needed sometimes as a workaround
e.g., crypto taking too long to complete the request.
Work around for #79834, increase the default from 10 to 15s, in positive
case this will have no impact.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Even if the enum contains the same values, the values might
change if the wpa_supplicant sources change or Zephyr values
change. In order to avoid weird errors later and prevent the
following warning, add a conversion functions for the enums.
modules/hostap/src/supp_api.c:1172:23: warning: implicit conversion
from enumeration type 'enum mfp_options' to different enumeration
type 'enum wifi_mfp_options' [-Wenum-conversion]
status->mfp = ssid->ieee80211w; /* Same mapping */
modules/hostap/src/supp_api.c:1190:30: warning: implicit conversion
from enumeration type 'enum wpas_mode' to different enumeration
type 'enum wifi_iface_mode' [-Wenum-conversion]
status->iface_mode = ssid->mode;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "enum wpa_msg_type" was not found by default so add needed
include files to get the definitions.
modules/hostap/src/supp_main.h:61:57: warning: ‘enum wpa_msg_type’
declared inside parameter list will not be visible outside of
this definition or declaration
61 | void wpa_supplicant_msg_send(void *ctx, int level,
enum wpa_msg_type type,
const char *txt,
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Both the supplicant_set_btwt() and supplicant_ap_bandwidth() are
not found in Zephyr sources so remove them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE is enabled, there
are lot of missing functions reported during linking.
Add missing C files to the compilation to fix this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
