If calling function k_thread_resume() when the thread is not suspend,
it takes no effect. This change improve coverage of function
k_thread_resume() in sched.c
Signed-off-by: Ying ming <mingx.ying@intel.com>
Extended test to validate following functionality:
- k_busy_wait
- k_timer
- irq_lock/irq_unlock
- k_cpu_idle
- SYS_INIT()
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The comment in this test says that it cannot use ztest, as the latter
spawns some threads. However, still format the output in a way
compatible with ztest output, by using tc_util.h macros. This is
similar to a few other tests which can't use ztest library directly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test understood that it can't demand equality in timing because
of races against real time, so it simply validated that the test
started at or later than the expected timeout expiration.
But when calculating the expected time, it called k_uptime_ticks()
AFTER the timeout was registered. So on systems with fast ticks (or
just bad luck) a tick expiring between the two steps will look like an
"early" expiration and fail the test. Do things in the proper order.
Also, use the correct APIs for unit conversion and timeout
construction.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There is a race between k_sem_take() and k_object_access_grant() so it
is possible (especially when testing SMP) that the thread tries to take
the semaphore before the originating thread has had the chance to
grant it permission.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Allow the test to run for non-secure firmware builds, by
removing the test-case for nonsense string, as this test-case
will likely produce a secure fault which will crash the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
THIS COMMIT DELIBERATELY BREAKS BISECTABILITY FOR EASE OF REVIEW.
SKIP IF YOU LAND HERE.
Remove the existing implementatoin of k_thread_abort(),
k_thread_join(), and the attendant facilities in the thread subsystem
and idle thread that support them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Thread stack memory on coherence platforms needs to be linked into a
special section (so it can be cached).
Also, the test_idle_stack case just can't work with coherence. It's
measuring the CPU's idle stack's unused data, which was initialized at
boot from CPU0, and not necessarily the CPU on which the test is
running. In practice on intel_adsp_cavs15, our CPU has stale zeroes
in the cache for its unused stack area (presumably from a firmware
memory clear at boot or something?). Making this work would require a
cache invalidate on all CPUs at boot time before the idle threads
start, we can't do it here in the test because we don't know where the
idle stack pointer is.
Too much work for an esoteric stack size test, basically. Just
disable on these platforms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It was discovered that TLS data/bss in stack need to be
aligned correctly or else incorrect variables would be
accessed. This makes tdata and tbss sections to have
odd sizes to make sure everything still works.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add some error condition of testcases to verify whether the
robustness of API. Such as give a NULL to some API and check
the response if get result that we were expacted.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Increase the heap memory pool size in the
prj_armv8m_mpu_stack_guard.conf, to match
the value in the default configuration in
proj.conf (and fix an out-of memory issue
when allocating a kernel object).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
tls rely on both arch has tls and toolchain support tls, add filter:
CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE for
some tests enabled tls.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This test was written to use a TINY system heap (64 bytes) from which
it has to allocate on behalf of a userspace process. The change in
convention from mem_pool (where the byte count now includes metadata
overhead) means it runs out of space. Bump to 192 bytes. Still tiny.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
For compatibility layers like CMSIS where thread objects
are drawn from a pool, provide a context pointer to the
exited thread object so it may be freed.
This is somewhat obscure and has no supporting APIs or
overview documentation and should be considered a private
kernel feature. Applications should really be using
k_thread_join() instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Show that trampolining thread self-aborts to the idle thread
works and that we have sufficiently set the idle stack size
for this, PM hooks, and dynamic kernel object cleanup.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When doing test_thread_join with OTHER_ABORT_TIMEOUT, the interval
between two k_uptime_get() includes the two k_thread_create() which
means the interval delta does not exactly count the time spent
in k_thread_join(). On x86_64 with userspace, time spent inside
k_thread_create() scales with memory size as it needs to create
a new page table for the thread. So to actually measure
the time spent in k_thread_join(), the locations where uptime is
obtained need to be moved.
Fixes#28549
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Possibly copypasta, or improvements to the test, either way
this test doesn't use that much RAM especially if memory
protection isn't active.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There are predictable relationships between the actual size
of a stack object, the return value of K_*_STACK_SIZEOF() macros,
and the original size passed in when the stack was declared.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently for informational purposes, although we do check that
the carveout is smaller than the stack_size.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
thread->stack_info is now much more well maintained. Make these
tests that validate that user mode has no access just outside
the bounds of it, instead of the entire object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If k_thread_join() was passed with an actual timeout value,
and not K_FOREVER, the blocking thread was not being properly
woken up when the target thread exits. The timeout itself
was never aborted, causing the joining thread to remain
un-scheduled until the timeout expires.
Amend the k_thread_join() test cases to check that the join
completed before the provided timeout period expired.
Fixes: #24744
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This doesn't work properly on x86 unless the dynamic thread
struct allocated gets lucky and is aligned to 16 bytes.
Disabling for now until #17893 is fixed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test has a race condition between the start of
its statically initialized threads running on another CPU,
and the assignment of those threads to a memory domain in the
ztest_main() function. Disable SMP for this test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When networking is selected, building the test
fails with:
undefined reference to `z_impl_k_thread_create'
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add test cases to make sure that a thread that suspends itself stops
executing immediately, and that a thread suspended while sleeping does
not wake up unexpectedly when its timeout expires.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
