The functions to manipulate the essential flag indeed operate on
threads, but they are misplaced in the thread implementation file. Put
them alongside other routines setting other thread flags and cleanup
headers a bit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Support for listing both testcases and testsuites
- Support for running single suites or single test cases
- Support shuffling tests and repeating execution based on command line
arguments.
For example, build with
west build -p -b qemu_cortex_m3 tests/kernel/sleep -t run -- \
-DCONFIG_ZTEST_SHUFFLE=y -DCONFIG_ZTEST_SHELL=y
Following commands are available:
uart:~$ ztest
ztest - Ztest commands
Subcommands:
run-all :Run all tests
shuffle :Shuffle tests
list-testsuites :List all test suites
list-testcases :List all test cases
run-testsuite :Run test suite
run-testcase :Run testcase
shuffle accepts two arguments --suite_iter and --case_iter which allows
repeated exercution of testcases or suites.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This option (CONFIG_HEAP_MEM_POOL_SIZE) is not used for the tests.
Moreover it overrides the option, specified in the board's Kconfigs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When testing k_busy_wait(100), don't require that at least 100µs of CPU
time be consumed by the thread itself; some of that time may be used
elsewhere in the system. Instead, just make sure that at least 80µs is
accounted to the thread and allow 20µs to get used elsewhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace combination of printk() and TC_PRINT() to LOG_DBG() disabled
by default so that it does not affect execution time.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Most of the local functions are static, make code consistent by making
remaining functions static as well.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Compiler can't tell that k_thread_abort() won't return and issues a
warning unless we tell it that control never gets this far.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For tests that set CONFIG_MP_NUM_CPUS, switch to using
CONFIG_MP_MAX_NUM_CPUS instead as we work to phase out
CONFIG_MP_NUM_CPUS.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit updates all deprecated `K_THREAD_STACK_EXTERN` macro usages
to use the `K_THREAD_STACK_DECLARE` macro instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Documentation specifies that aborting/terminating/exiting essential
threads is a system panic condition, but we didn't actually implement
that and allowed it as for other threads. At least one app wants to
exploit this documented behavior as a "watchdog" kind of condition,
and that seems reasonable. Do what we say we're supposed to do.
This also includes a small fix to a test, which seemed like it was
written to exercise exactly this condition. Except that it failed to
detect whether or not a system fatal error was actually signaled and
was (incorrectly) indicating "success". Check that we actually enter
the handler.
Fixes#45545
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When threads are in more than one state at a time, k_thread_state_str()
returns a string that lists each of its states delimited by a '+'.
This in turn necessitates a change to the API that includes both a
pointer to the buffer to use for the string and the size of the buffer.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Thread APIs test for k_busy_wait incorrectly asserted that a delay of
100 us should produce a delay in cycles less than or equal to to 100 cycles
of the hardware clock. Since most hardware clocks are fast, this assertion
was valid, but it does not test for the actual delay.
Fix the assertion to verify that a delay of 100 us produces a delay in
cycles less than or equal to 100 us worth of hardware clock cycles.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Clang 12.0.0 complains about
"cast to smaller integer type 'enum control_method' from 'void *'
[-Werror,-Wvoid-pointer-to-enum-cast]".
Cast it to intptr_t type first.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The thread_apis tests of the RUNTIME_STATS feature weren't really
testing the right behavior.
+ It assumed that accounting would only happen at context switch time
and required that the returned values not change for running threads
(even CLEARLY running threads like _current!). But that's not a
documented feature! It's actually sort of a wart that we'd like to
be able to fix (and have fixed, the new backend returns realtime
values so you can track CPU-bound processes on another CPU).
+ It assumed that k_thread_runtime_stats_all_get() would return time
that includes idle time (or conversely it forgot that
k_thread_foreach enumerates over idle threads). This was sort of a
bug in the original (because it means that the result is always the
system uptime multiplied by the number of CPUs)
Broadly, instead of testing the result of a "time" function for
equality (never a good idea) test it via appropriate bounds given the
usage.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add testing for the PIN_ONLY API variant (which has a separate run
queue per CPU). Predicate on SMP systems only, to keep needless
duplicate testing to a minimum.
Note that one of the cases in this test exercises an "all cpus" option
for the cpu mask, which is illegal when CONFIG_SCHED_CPU_MASK_PIN_ONLY
is set. Skip.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If calling function k_thread_resume() when the thread is not suspend,
it takes no effect. This change improve coverage of function
k_thread_resume() in sched.c
Signed-off-by: Ying ming <mingx.ying@intel.com>
This test understood that it can't demand equality in timing because
of races against real time, so it simply validated that the test
started at or later than the expected timeout expiration.
But when calculating the expected time, it called k_uptime_ticks()
AFTER the timeout was registered. So on systems with fast ticks (or
just bad luck) a tick expiring between the two steps will look like an
"early" expiration and fail the test. Do things in the proper order.
Also, use the correct APIs for unit conversion and timeout
construction.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Allow the test to run for non-secure firmware builds, by
removing the test-case for nonsense string, as this test-case
will likely produce a secure fault which will crash the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
THIS COMMIT DELIBERATELY BREAKS BISECTABILITY FOR EASE OF REVIEW.
SKIP IF YOU LAND HERE.
Remove the existing implementatoin of k_thread_abort(),
k_thread_join(), and the attendant facilities in the thread subsystem
and idle thread that support them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
For compatibility layers like CMSIS where thread objects
are drawn from a pool, provide a context pointer to the
exited thread object so it may be freed.
This is somewhat obscure and has no supporting APIs or
overview documentation and should be considered a private
kernel feature. Applications should really be using
k_thread_join() instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When doing test_thread_join with OTHER_ABORT_TIMEOUT, the interval
between two k_uptime_get() includes the two k_thread_create() which
means the interval delta does not exactly count the time spent
in k_thread_join(). On x86_64 with userspace, time spent inside
k_thread_create() scales with memory size as it needs to create
a new page table for the thread. So to actually measure
the time spent in k_thread_join(), the locations where uptime is
obtained need to be moved.
Fixes#28549
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If k_thread_join() was passed with an actual timeout value,
and not K_FOREVER, the blocking thread was not being properly
woken up when the target thread exits. The timeout itself
was never aborted, causing the joining thread to remain
un-scheduled until the timeout expires.
Amend the k_thread_join() test cases to check that the join
completed before the provided timeout period expired.
Fixes: #24744
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
