This sample enables EVENTFD (through NET_SOCKETS_SERVICE)
which is not kconfig compatible with the old
NATIVE_APPLICATION targets (native_posix[//64])
Let's explicity filter out this platforms to avoid the
sample from failing to build
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
due to MQTT now have ALPN support
the example code of using ALPN to connect MQTT
over port 443 need to be added
Signed-off-by: sukrit buddeewong <sukrit.omu@gmail.com>
Both VEVIF and BELLBOARD test cases are unidirectional from the core
executing the test (cpuapp). For VEVIF, cpuapp pings, and for BELLBOARD,
cpuapp pongs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The bonding info is not loaded after the Bluetooth
initialization again.
Call settings_load after the Bluetooth initialized.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The broadcast audio sink now supports stereo if
CONFIG_TARGET_BROADCAST_CHANNEL=3 (LEFT | RIGHT).
It parses the BASE to find a set of BIS (1 or 2) that contain
the channel allocation from CONFIG_TARGET_BROADCAST_CHANNEL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Documentation for IPM MCUX sample did not provide correct command for
building sample. To resolve this, add the "--sysbuild" argument to build
command documentation
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In order to avoid defining almost the same overlays for different
sample codes and/or applications a common overlay file per
display interface is defined under the boards dts folder.
In doing so, an application/sample code will only have to
define another overlay explicitly under application's board
folder if more blocks are to be enabled. In either case, users
should explicitly invoke the requested overfiles at 'west build'
invokation by using the DTC_OVERLAY_FILE system variable.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Add a sample application to demonstrate some basic
C and shell interfaces for manipulating environment
variables.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The sample assumed that the broadcast audio was always a single
frame per block. This commit improves the validation of the
codec configuration from the broadcast source, and properly
decodes the SDU using the configuration values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update all usages of the MBOX API to the latest API changes (to be
squashed for bisectability).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The heap size for i.MX RT1170 is way too much while for i.MX RT595, it
is too small to afford for 4-bytes formats, e.g. ARGB8888.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Added USE_SPECIFIC_BROADCAST_CHANNEL which enable/disables the use of a
specific channel audio location for the broadcast audio sink sample.
If USE_SPECIFIC_BROADCAST_CHANNEL is set to no then first valid channel
is chosen. In this case broadcast channel with no audio location is
also supported.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
The esp32s3_devkitm and the nrf5340dk_nrf5340 only have ws2812 in
each configurations that is procpu and cpuapp respectively.
Rename overlay and conf files to avoid building with unnecessary
configurations.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
ws2812-gpio's `in-gpios` property is not used as an input pin.
Renaming it to `gpios` to reflect the actual situation.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add overlay file to support the pro devkit. To build the sample
code, one should explicitly select the overlay file at
'west build' invokation via the DTC_OVERLAY_FILE system variable.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Add overlay file to support the pro devkit. To build the sample
code, one should explicitly select the overlay file at
'west build' invokation via the DTC_OVERLAY_FILE system variable.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Certain samples are supposed to demonstrate technology-specific
features, therefore their dependencies in sample.yml could be
narrowed to run verify build only on boards which support that
specific technology (like Ethernet or OpenThread).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- Include cleanup
- s/NET/REMOTE (remote core may have nothing to do with NET)
- Improved error reporting
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The added configuration files allow the sample to be run
on the nRF52840 present on the nRF9160 DK with the nRF9160
(running SLM) being the modem and communication happening
through pins that are routed internally between the two.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- A small delay is added after the post-restart L4_CONNECTED event
is received to prevent trying to send packets too quickly. Otherwise
the first packet would not get sent and the sample would hang on recv().
- Some logs and function parameters are fixed.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add the nucleo_c031c6 target to run the samples/drivers/watchdog
for iwdg and wwdg on the stm32c0 serie.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
'not CONFIG_NATIVE_LIBC' filter is just to prevent building for
'native_posix' platform with additional options selected by
'sample.net.sockets.http_get.posix' testcase.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The nRF91 series devices, when running the Serial LTE Modem (SLM)
application starting with nRF Connect SDK 2.6.0, can now be used as
standalone modems via the generic modem_cellular driver.
A configuration to run the cellular_modem sample on the nRF9160 DK
(plugged in to another nRF91 series device running SLM) is provided.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- It now uses the first PPP network interface instead
of the default network interface.
- Logs are added/improved.
- Potentially unused modem_chat matches are declared as such
to suppress compiler warnings.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
No need to loop through network interface addresses, just
listen DHCPv4 bound event and use that as a condition to continue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
