Codecs can be printed at different levels:
level 0: Generic and unicast
level 1: subgroup codec configs
level 2: BIS codec configs
This commit ensures that the indentation level
is correctly increase based on where the codec configuration
data is printed.
This also updates the documentation for the BAP shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit adds description of the Large Composition Data
client's shell commands into documentation.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The cmd_sync_broadcast command now also takes an optional broadcast
code, to support syncing with encrypted broadcasts.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes misleading docstring for input of core type for the
mesh models dfu metadata encode command.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Using the `bap preset` command it is now possible to set all the
codec configuration data and metadata value at runtime. This will
allow to set specific values for each stream in each direction.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The print_sirk function that simply logs the SIRK has been removed,
as the SIRK is now directly accessible to the application via the
get_sirk function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast_stop command takes either "all" or one or more
stream pointers as argument, but the argument handler did
not allow this.
The documentation for the command was also out of date.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a note to the access randomization feature that reordering can
happen and what should be done to avoid it.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Improves the broadcast assistant shell documentation
which updates the existing documentation and adds
documentation to commands not yet documented.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the doc/connectivity/bluetooth directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Bluetooth Mesh Protocol 1.1 is backward compatible with Bluetooth Mesh
Profile 1.0.1, therefore the stack can still be qualified for 1.0.1 if
needed. But explicit support for both versions requires additional
maintenance efforts and doubles the CI time. To make the stack
qualifiable for 1.0.1, the one needs to remove Private Beacons reception
and compile out SHA256 algorithm support.
What is changed:
- Removed `CONFIG_BT_MESH_V1d1` option.
- Removed `transport_legacy.c` which was using 1.0.1 implementation. The
new transport layer has new SaR logic that should still be possible to
qualify for 1.0.1.
- Removed the legacy transport Kconfig options. They are superseded by
the new transport Kconfig options.
- Tester app: `overlay-mesh-v1d1.conf` is merged into
`overlay-mesh.conf`.
- Removed BabbleSim tests for 1.0.1.
- Updated documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
PBP API allows sources to create a Public Broadcast Announcement.
PBP API to parse a Public Broadcast Announcement.
public_broadcast_source application starts extended advertising and
includes a Public Broadcast Announcement. The advertised broadcast
audio stream quality will cycle between high and standard quality.
public_broadcast_sink application scans for broadcast sources and
synchronizes to the first found source which defines a Public Broadcast
Announcement including a High Quality Public Broadcast Audio Stream
configuration.
Add bsim tests for Public Broadcast Profile APIs.
Add shell implementation for Public Broadcast Profile APIs.
Signed-off-by: Daniela Andreea Dumitrache <danielaandreea.dumitrache@nxp.com>
Implement the CAP Commander discovery function.
Adds support for it in the shell.
This includes initial babblesim and unit testing as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The section 3.7.3.1 of the mesh specification recommends to delay
a message publication in certain cases:
- at power-up or upon state change for a time between 20 to 500 ms
- for periodic publications for a time between 20 to 50 ms
This change implements this recommendation by adding the
`CONFIG_BT_MESH_DELAYABLE_PUBLICATION` Kconfig option which enables
the randomization code and by adding the `bt_mesh_model_pub.delayable`
bit field which allows each model decide whether the publications
should be delayed for this model or not.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Renames "prov device" references and options to
"provisionee" to align implementation with Mesh
Protocol specification v1.1, section 5.4.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Add the GMAP shell module with support for running the
various audio configurations in an easy way.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
SIG has changed Bluetooth mesh to Bluetooth Mesh
Updating zephyr docs accordingly
Leaving out old release notes
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Another round of repeated words cleanup. This commit tries to keep the
diff minimal and line wrapping was mostly left intact in the touched
files, as having them consistent across the documentation is probably
the topic of a future tree-wide cleanup (or not)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The ability to send the solicitation PDU doesn't
depend on GATT Client role.
Commit makes independent one functionality from
another.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Improves the documentation about how CDP 128, 129 and 130, as well as
Models Metadata Page 128 are created, as well as which functions the
application will have to call to store the correct contents in the
pages.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
Updates Bluetooth mesh specification references:
- Change "Profile" to "Protocol" since the main specification has
changed its name.
- Update/align formating of specification references. This will
make it easier to find spec references in the future.
- Change some section references to point to the correct section of the
newest version of the specification (v1.1).
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Fixed a few occurrences of incorrect references to Kconfig options
(missing the CONFIG_ prefix)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Correct DFU and BLOB models specs names. Also mentioning that they are
experimental yet (under BT_MESH_V1d1 option).
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
While it doesn't seem to be an issue for HTML rendering, the use of
\verb is not allowed within LaTeX equations and breaks the PDF build.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This adds support for the Upload OOB Start message to the DFD server, by
providing callbacks that the application can use to hook any OOB scheme
into the model behavior.
There are also extensive changes to the dfu_slot module, to accomodate
the new needs that appeared with the support for OOB transfer (mainly,
fwid, size and metadata are no longer available when the slot is
allocated, they appear later in the handling).
Signed-off-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
According to https://github.com/zephyrproject-rtos/zephyr/pull/61886#issuecomment-1713302331
we need to use "must only" for models that spec states:
`If supported, ... shall be supported by the primary element and shall
not be supported by any secondary element`.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Corrected the profile specification v1.0.1 link to point to
the spec directly and not to the general specification page.
Added link to protocol specification v1.1.
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
Adding rst files describing SAR Configuration
models, SAR Configuration Client and SAR Configuration
Server.
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
Add missing bt_mesh_dfd group to the mesh DFU documentation page as it
covers all DFU models including Firmware Distribution models (called
as `dfd` in the code).
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
