Fixes#71761
The `west boards` command parses extra BOARD_ROOTs from Zephyr modules,
so that the boards defined in those modules are automatically listed.
In HWMv2, OOT boards can be described in terms of OOT SoCs, which means
that extra SOC_ROOTs must also be provided. Otherwise, an error message
will be displayed when attempting to list all boards. Therefore, every
Zephyr module SOC_ROOT should be included as well.
In HWMv1 (deprecated), OOT boards can be defined in terms of OOT archs,
but module ARCH_ROOTs had never been included automatically. The fix for
this is long overdue, but it's included for symmetry.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Increase the default SDO timeout for the CANopen program download west
runner from 0.3 seconds to 1 second. Depending on the flash size and speed,
a full erase may take slightly longer than 300 ms.
The timeout can be customized by using the --sdo-timeout runner parameter.
Fixes: #73987
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The current version of scipts do not consider OOT boards use cases and
the tests with robot now are strict to only one robot file, which is
not realistic for real environment. This address those issues and allow
multiple testsuits at command line and lists at tests entries. It add
another test parameter to allow configure robotframework options.
Fixes: #74563
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Adjust error message so that it clearly states runners.yaml is
missing from <build_dir>/zephyr, instead of referencing CMake cache
variable ZEPHYR_RUNNERS_YAML, which is no longer used (since
3124c02987 ).
Also clean up that variable in CMake since it is no longer used
(0 other references in entire tree).
Fixes#70605
Signed-off-by: Louis Feller <louis.feller@st.com>
In order for the --recover option to work properly on the nRF54H20, it
requires executing it for both cores, the radio and the application one.
Extend the recover_target() function so that it does so for both 53 and
54H20.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
`west build` can be invoked without specifying the source directory when
being invoked from the source directory itself.
When using `west build` for incremental builds, then the build command
will examine the CMake cache to determine the application dir by using
the value of CMAKE_HOME_DIRECTORY.
With sysbuild, this leads to the wrong assumption that the sysbuild
itself is the application to build.
Instead, have west build look for APP_DIR which points to the correct
source dir when sysbuild is used. Use APPLICATION_SOURCE_DIR when
APP_DIR is not set, as this indicates a no-sysbuild build.
Keep CMAKE_HOME_DIRECTORY behavior as last fallback mechanism.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Since `writer.py` is the one writting the SPDX file, it should normalize
the name field and not `walker.py` which generates the SBOM components.
Signed-off-by: Thomas Gagneret <thomas.gagneret@hexploy.com>
Improve the SPDX with the current values:
- URL: extracted from `git remote`. If more than one remote, URL is not
set.
- Version: extracted from `git rev-parse` (commit id).
- PURL and CPE for Zephyr: generated from URL and version.
For zephyr, the tag is extracted, if present, and replace the commit id for
the version field.
Since official modules does not have tags, tags are not yet extracted for
modules.
To track vulnerabilities from modules dependencies, a new SBOM,
`modules-deps.spdx` was created. It contains the `external-references`
provided by the modules. It allows to easily track vulnerabilities from
these external dependencies.
Signed-off-by: Thomas Gagneret <thomas.gagneret@hexploy.com>
The gdb-port defines the GDB port and the openocd runner passes
this value to openocd as well as gdb. However, the TI AM62x board
provides multiple ports for each subsystem. For example, systick
appears at 3333, A53 as 3334-3337, R5F as 3338 and M4F as 3339.
If we want to connect to the M4F, we need to add another port which
is different to the to the gdb-port value.
This patch adds an additional argument --gdb-client-port to define
the port which GDB should connect to. It defaults to 3333, identical
to gdb-port.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Fixes an issue whereby the domains file in sysbuild projects
would be loaded and used with outdated information if sysbuild
configuration was changed then west flash was ran directly after
it
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Instead of blindly using the module names provided by the user via
command-line arguments, check if those actually exist in the current
manifest, and error out if any of them does not.
Fixes#73901.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handle MPI and root manifest for radio core separately from the main
build system logic.
Signed-off-by: Tomasz Chyrowicz <tomasz.chyrowicz@nordicsemi.no>
Make the generated json file match the contents generated with:
* nrfutil device erase --uicr --core Application --x-operation-id 1
--x-family nrf54h --x-append-batch batch.json
* nrfutil device program --firmware uicr_merged.hex
--options chip_erase_mode=ERASE_NONE,verify=VERIFY_READ
--core Application --x-operation-id 2 --x-family nrf54h
--x-append-batch batch.json
* nrfutil device reset --reset-kind RESET_PIN --x-operation-id 3
--x-append-batch batch.json
The erase options are supposed to be placed under "option" subkey.
Without the "option" subkey, nrfutil defaulted to ERASE_ALL.
Remove the firmware file format field because it is auto detected by
nrfutil when executing the batch script.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The flasher was unconditionally cleaning the UICR area, even when the
application didn't have a new configuration generated. This can happen,
when CONFIG_NRF_REGTOOL_GENERATE_UICR=n. In such case, keep the old UICR
configuration on the device.
A real scenario where we should set CONFIG_NRF_REGTOOL_GENERATE_UICR=n
is when building multiple firmware images that are meant to run one
domain. The primary application build generates the UICR configuration
and secondary images don't. Before this change, the flashing process of
the primary application would write new UICR configuration, but the
flashing process of secondary images would erase it.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The nrfutil runner calls "nrfutil --json device list" which outputs
information about all connected serial ports. The list includes not only
actual boards but also any ttyACM instance. If the ttyACM instance does
not have serial number, then the nrfutil runner will fail on matching
serial number regexp on NoneType.
Fix the issue by limiting nrfutil runner board output to only devices
that have trait jlink set.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Introduce `robot` command for running Robot Framework test suites.
Initial implementation consists of one runner dedicated for renode-test,
which is a Renode wrapper for running Robot tests.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Introduce `simulate `command for running samples on a simulator of
choice. Initial implementation consists of one runner, dedicated for
Renode.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Add explicit capabilities to nios2, nsim and openocd runners to prevent
them from having potentially unwanted ones (for example when new
capabilities are added to Zephyr).
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Add capability allowing to suppress the --file parameters that can be
passed to a west command runner.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Add the option to support an external loader for flashing
hex file to internal and external NOR flash using
the STM32CubProgrammer CLI with a board_runner_args
"--extload=MX25LM51245G_STM32U585I-IOT02A.stldr"
The absolute path of the stldr file is added to the
stm32CubeProgrammer command.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Do not end except block with a useless return, use a pass instead. This
fixes pylint R1711: "Useless return at end of function or method
(useless-return)".
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add "west build" argument for specifying shields. This saves users from
having to do "west build ... -- -DSHIELD=...", making shields a much better
integrated feature.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add example snippet argument to usage output of the "west build" command
and use the singular "SNIPPET" in the generated help text.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
We've reversed core launch order to workaround issue of
ARConnect initialization interfere with secondary cores
startup (we don't want to workaround it in runtime as it's
only possible in case of debug session).
However it bring us new issues with the simulation run:
- mismatch arcnum (core ID) with ARConnect ID
- mismatch arcnum (core ID) with CPU name in nSIM instruction traces
To avoid these issues let's use direct core order for simulation
runs.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Fix missing change to run Twister with default options setup.
Should be implemented together with #72399
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
- Fixes linkserver runner "west flash --erase" error:
ERRMSG: Exception: Device query can have at most 2 parts (3 found)
- There is no need to specify the core with
the flash erase command line.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
when run package from another PC, the openocd path
may not the same, so try to use ZEPHYR_BASE when
not aligned
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Spell checking tools do not recognize "iff", replace with "if and only if".
See https://en.wikipedia.org/wiki/If_and_only_if
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
There is no need to specify the core with the flash command line. This
is actually rejected with linkserver v1.5.xx and after.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
This adds supports for flashing images with sysbuild where there
are multiple images per board to prevent using the same command per
image flash which might cause issues if they are not ran just once
per flash per unique board name. A deferred reset feature is also
introduced that prevents a board (or multiple) from being reset if
multiple images are to be flashed until the final one has been
flashed which prevents issues with e.g. security bits being enabled
that then prevent flashing further images.
These options can be set at a board level (in board.yml) or a SoC
level (in soc.yml), if both are present then the board configuration
will be used instead of the SoC, and regex can be used for matching
of partial names which allows for matching specific SoCs or CPU cores
regardless of the board being used
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This fixes wrong slot selection when reading partition size. According
to the comment in code, 'slot1_partition' size should be preferred:
[...] slot1_partition size is used, when available, because in
swap-move mode it can be one sector smaller. When not available,
fallback to slot0_partition (single slot dfu). [...]
This fixes a typo in the if statement which currently always results in
use of 'slot0_partition' size.
Fixes: 86c4b4caa9 ("west/sign: Move from using partition label property")
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Minor update to existing zspdx implementation to add support for
PrimaryPackagePurpose introduced in SPDX 2.3.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
