Fix build error due to cmake requiring a separate
overlay for each of this target's SOCs.
Error being fixed:
```
-- Board: sam_v71_xult, qualifiers: samv71q21
CMake Error at cmake/modules/extensions.cmake:2742 (message):
Board sam_v71_xult defines multiple SoCs.
Shortened file name (sam_v71_xult.overlay) not allowed, use
'<board>_<soc>.overlay' naming
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace platform_allow with integration_platforms, what allow CI to
build samples on all platforms with test feature 'usbd' but still limits
number of platforms when it is invoked with the --integration option.
Replace/add some platforms that already have test feature 'usbd'.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The broadcast sink sample no longer treats the broadcast_code_received
semaphore as a boolean.
Fixes#75469
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
exclude cyw920829m2evk_02 from build. For cyw920829m2evk_02
need `west bloobs fetch` (to get BT fw), which does not
allowed in CI.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Increase the number of network packets and buffers for better TCP
performance in the sample out-of-the-box.
Decrease the network buffer data size for better buffer management in
the sample (less buffer space wasted for L2 header). The only drawback
of this is reduced TCP TX performance, but less than 2 Mbps in my case.
Finally, enable speed optimizations for another small performance boost.
As the RAM requirements of the sample now increase considerably in the
default configuration, add a note in the readme file about it, and how
to make it fit into smaller boards.
Tested on nucleo_h723zg:
Before (current defaults):
UDP TX RX
76.47 Mbps 93.48 Mbps
TCP TX RX
76.18 Mbps 67.75 Mbps
After (new defaults):
UDP TX RX
76.08 Mbps 93.62 Mbps
TCP TX RX
74.19 Mbps 85.51 Mbps
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allocating a buffer in the system workqueue thread should never
be done wiht a K_FOREVER as that may block the thread forever.
Replace the K_FOREVER with a K_NO_WAIT and slightly modified
the function to handle this case.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
EVENTFD is not anymore compatible with these targets so let's
disable them with this sample to avoid a failure in twister
otherwise.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update zephyr-app-commands to generate "west build --shield ..." for west
invocations using shields while still generating "cmake .. -DSHIELD=..."
if the tool is set to "cmake".
Updated the various shield documentation pages to recommend using
"--shields" over "-DSHIELD" to match the results of the corresponding
zephyr-app-commands code snippets.
Add proper support to zephyr-app-commands for specifying multiple shields
(using a comma-separated list) and fix a few invocations to use this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The README "Testing CANopen Program Download" section needs a sysbuild
MCUboot option. Otherwise only the application is built and the test will
fail.
This has probably been missing since commit
238d113185.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
The DHCP server can distribute DNS addresses, hence enable DNS resolver
in the sample to show this functionality.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently used DHCP server in the sample, dhcpd, is no longer maintained
and reached EOL. Therefore, update the sample's readme file with a
sample configuration for its successor, kea.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The current version of scipts do not consider OOT boards use cases and
the tests with robot now are strict to only one robot file, which is
not realistic for real environment. This address those issues and allow
multiple testsuits at command line and lists at tests entries. It add
another test parameter to allow configure robotframework options.
Fixes: #74563
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The txtime can be run manually with qemu_x86 but it is enough
to have native_sim compiled with twister.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When setting boolean options using setsockopt(), the option
type should be int as the size of the option type is checked
and only int is accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Uses the variable for the default image when adding sysbuild
dependencies so that they can be copied out-of-tree and still work
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
"ZEPHYR FATAL ERROR 2: Stack overflow on CPU 0" observed on a few
supported platforms when using SD card disk. Increase main stack size
for next USB device stack configuration to prevent stack overflow.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Print on what board/core sample is executing.
Print how many bytes of data can be sent
in the mbox message (show use of mbox_mtu_get_dt()).
Print how many channels are available for incoming and/or
outgoing messages (show use of mbox_max_channels_get_dt()).
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add `CONFIG_REQUIRES_FLOAT_PRINTF=y` to tflite-micro samples as in the
past the module was using its own `printf` implementation, but now uses
our logging infrastructure.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The `type` parameter of `struct bt_le_scan_param` is documented as
taking a `BT_LE_SCAN_TYPE_*` value, not a `BT_HCI_LE_SCAN_*` value.
In practice this makes no difference as the values are defined as the
same integer, but does result in `<zephyr/bluetooth/hci.h>` not needing
to be included.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Sockets service thread need to be cooperative for best performance.
Enable CACHE_MANAGEMENT as some boards don't do it by default, it has
devastating impact on the performance as well.
Finally, increase FDS count, so that uploads still work when both TCP
and UDP receiver are enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
A specific test case for STM32 RTC is needed because of the way Counter
node is selected in preprocessing.
Tests STM32 RTC_Alarm using counter_ll_stm32_rtc driver.
This also clarifies how STM32 RTC Alarm can be used in this test.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
This patch reworks the testcase.yaml and sample.yaml files for the llext
subsystem to further reduce the number of tests performed by CI while
improving overall coverage.
The following changes are introduced by this commit:
- Remove the arch_allow field from the common section to allow any arch
to be tested in the build_only test. All other tests explicitly narrow
down the arches they are applicable to.
- In addition to platforms with active issues, also exclude a number of
platforms that are always skipped by the runtime filter due to
RAM/Flash limitations.
- Add integration_platforms to limit the test count to a few selected
platforms which are representative of the different arches.
- Remove a number of duplicate SLID tests and group them into a single
test that covers both ARM and Xtensa architectures.
- Test the relocatable case on ARM as well.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch sets the default value for LLEXT_STORAGE_WRITABLE to 'y' on
the Xtensa architecture. This is necessary because it does not currently
support the read-only mode for the LLEXT storage.
Make sure the default reflects this instead of asking the user to
manually set it.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Recent PR turned on test case for twister which revieled a bug
with building the test case for RT1050 EVK. The touch_controller
DTS node was removed a by commit 57ad325e and further deprecated
by bde07beb5 when the platform was converted to tread displays as
shields.
Signed-off-by: David Leach <david.leach@nxp.com>
The overlay was in the root of the sample folder instead of the boards
folder. This is clearly a mistake.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Recent POSIX changes caused that 3 file descriptors are now preallocated
for stdin/out/err. This caused file descriptor shortage in all-in TLS
configuration of the sample, hence increase the maximum FD count.
In the server sample this manifested itself as an accept() error. This
triggered a busy loop though in the sample, as in case of accept()
errors it'd just try again w/o any delay. This made this issue hard to
investigate, so to avoid such cases in the future, make the accept()
failure fatal in the echo_server sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Echo samples exchange data fragments longer than the default DTLS max
fragment length introduced in commit
f033cd5601. Hence, need to increase this
config value for the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Commit 3046e95d85 introduced eventfd use
in the sample, increasing the pollfd array size, however the config
indicating maximum number of monitored events remained intact, so the
sample didn't really work.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The NRF91_SLM has no additional AT channel for the AT shell to
use. This commit disables the AT shell for boards which use
the NRF91_SLM.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Added tabs to the thrift doc so that building works for macos
and is consistent with the rest of the documentation in terms
of one tab per os.
Updated client and server makefiles to discover include paths
for boost and openssl.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
net_mgmt sockets do not implement internal queue but use
net_mgmt_event_wait() internally to receive events. As a consequence,
in case of events burst, some events may be lost if the receiving
thread has lower priority than the net_mgmt thread.
This was visible in the sample, where only DAD event was reported
properly, as IPv6 Add/Remove events were triggered in pair with
corresponding multicast events (from solicited-node multicast
address).
We can mitigate this by increasing main thread priority to be at the
same priority as net_mgmt thread, so that the receiving thread (main)
has a chance to run in between event reports.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Define the configuration to run the test on the external memory
xspi flash of the stm32h573i_dk disco kit in MemoryMapped Mode
Reading is done with memcopy and erase/write are aborting operation
to send the appropriate command
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define the configuration to run the code_relocation
application on the external memory xspi flash
of the stm32h573i_dk disco kit in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
At least for nrf boards, the emulation timer settings generate
reading around -60 degrees. Verify that value with some threshold.
Delay the first reading to prevent 0 at the beginning.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
After enabled POSIX_API in the sample, not all headers were included in
the build due to #ifdefs around header inclusions. This commit fixes
this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
