This reverts commit d9855da483.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit b10f1ca3a6.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
This reverts commit e9b676a9ab.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Mark the POSIX_SIGNALS Option Group as supported to the extent
possible under Zephyr, as Zephyr does not yet support processes.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Mark the POSIX_DEVICE_IO Option Group as commplete. This Option
Group is required for PSE51, PSE52, PSE53, PSE54, and most of
the interesting applications involving file descriptors and
sockets.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The async-io documentation was in need of some beautification.
Rather than repeating the same thing inside of the table, just
mention that the whole option is expected to fail enosys.
At this time, there does not seem to be sufficient need for
implementing async io, so it is only present so that conforming
applications can still link properly.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The following functions are not implemented:
- getc_unlocked()
- getchar_unlocked()
- putc_unlocked()
- putchar_unlocked()
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Mark _POSIX_MEMORY_PROTECTION as supported (i.e. a
conformant application will link). Zephyr's mm API does not
currently support modifying memory protection bits after
pages have been mapped, so use of this function may result
in undefined behaviour.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Mark mlockall() and munlockall() as supported, as well as the
_POSIX_MEMLOCK Option.
These functions are currently expected to fail, but are
required so that conformant applications can still link
successfully.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Mark mlock() and munlock() as supported, as well as the
_POSIX_MEMLOCK_RANGE Option.
These functions are currently expected to fail, but are
required so that conformant applications can still link
successfully.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The fstat() function is implemented as part of the
POSIX_FILE_SYSTEM Option Group, but it is implemented through
zvfs, as an ioctl, which allows other file descriptor types to
support queries of file descriptor status.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
- Unify shell backends in a dedicated section.
- Add documentation for the following backends: USB, BLE, RTT.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
The CONFIG_NVS_DATA_CRC configuration item allows to enable a CRC-32
on the data part of the NVS items.
Signed-off-by: Adrien Ricciardi <aricciardi@baylibre.com>
This documentation was a bit unappealing. Add a
paragraph at the top to describe the level of support.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
While Breathe seems to not care and creates hyperlinks either way, the
proper role to mention a C enumerator is :c:enumerator:. :c:enum: is to
be used to refer to the enum itself.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The go tool documentation is very old, and the tool is not
recommended for use, therefore remove all documentation relating
to it to prevent people from using it
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Moves the rtio_ prefixed lockfree queues to sys alongside existing
mpsc/spsc pbuf, ringbuf, and similar queue-like data structures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add new information about new property to
enable/disable device power management per
power state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
That is option has shown confusing on it is attempt to prevent
system pm doing device power management. Lets address this
problem properly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add release notes for the deprecation of a number of POSIX
Kconfig options. These have been deprecated so that we can
use more normative Kconfig variable identifiers, based on
the Options and Option Groups of IEEE 1003.1-2017.
To simplify migration, use
python $ZEPHYR_BASE/scripts/utils/migrate_posix_kconfigs.py \
-r root_path
Additionally, document the removal of PTHREAD_BARRIER_DEFINE(),
EFD_IN_USE, EFD_FLAGS_SET, which were previously deprecated
>= 2 release cycles before.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Until recently, the posix api was purely a consumer of the
network subsystem. However, a dependency cycle was added as
a stop-gap solution for challenges with the native platform.
Specifically,
1. eventfd symbols conflict with those of the host
2. eventfd was excluded from native libc builds via cmake
If any part of the posix were then to select the network
subsystem (which is a legitimate use case, given that networking
is a part of the posix api), we would get a build error due to
the Kconfig dependency cycle.
As usual, with dependency cycles, the cycle can be broken
via a third, mutual dependency.
What is the third mutual dependency? Naturally, it is ZVFS
which was planned some time ago. ZVFS will be where we
collect file-descriptor and FILE-pointer APIs so that we can
ensure consistency for Zephyr users.
This change deprecates EVENTFD_MAX in favour of
ZVFS_EVENTFD_MAX.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add a link to the Kconfig option CONFIG_POSIX_NETWORKING in
the documentation.
Additionally, add Kconfig options for other Network
dependencies in an effort to make POSIX Kconfig options
consistent with the specification.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add links to POSIX-related Kconfig options that are related to
POSIX Options and Option Groups.
These include limits that might not have an associated standard
name and related Kconfig variables in other subsystems.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Create a Kconfig option for POSIX_MULTI_PROCESS Option Group
and mark it as experimental.
Currently, Zephyr has two functions that belong to this
Option Group:
- sleep()
- getpid()
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_POSIX_SIGNAL in favour of
the plural CONFIG_POSIX_SIGNALS, which maps directly to the
name of the standard POSIX Option Group POSIX_SIGNALS.
Additionally, mark signals as experimental.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Zephyr's POSIX API is moving toward using the standard
nomenclature from IEEE 1003.1-2017 for as much as possible. In
particular, we want to have consistent naming between Zephyr's
POSIX API Kconfig options and the naming for POSIX Options and
Option Groups.
The Kconfig option CONFIG_PTHREAD_IPC has been (ab)used for a
very long time for a variety of different purposes. However,
the standard Option / feature test macro for POSIX Threads is,
intuitively _POSIX_THREADS. There is a corresponding sysconf()
key named _SC_POSIX_THREADS.
Annoyingly, the POSIX Option Group that corresponds to the
Option is POSIX_THREADS_BASE, which is a minor inconsistency
in the standard.
The _POSIX_THREADS Option already includes mutexes, condition
variables, and thread-specific storage (keys). So with this
change, we also deprecate the redundant Kconfig variables that
do not have a corresponding match in the standard.
- CONFIG_PTHREAD_IPC
- CONFIG_PTHREAD
- CONFIG_PTHREAD_COND
- CONFIG_PTHREAD_MUTEX
- CONFIG_PTHREAD_KEY
Additionally, create Kconfig variables for those configurables
which we are lacking:
- CONFIG_POSIX_THREADS_EXT
- CONFIG_POSIX_THREAD_ATTR_STACKSIZE
- CONFIG_POSIX_THREAD_ATTR_STACKADDR
- CONFIG_POSIX_THREAD_PRIORITY_SCHEDULING
- CONFIG_POSIX_THREAD_PRIO_INHERIT
- CONFIG_POSIX_THREAD_PRIO_PROTECT
- CONFIG_POSIX_THREAD_SAFE_FUNCTIONS
Some Kconfig variables were renamed to more properly match the spec:
- CONFIG_MAX_PTHREAD_COUNT -> CONFIG_POSIX_THREAD_THREADS_MAX
- CONFIG_MAX_PTHREAD_KEY_COUNT -> CONFIG_POSIX_THREAD_KEYS_MAX
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_POSIX_PUTMSG and introduces a new
Kconfig option CONFIG_XOPEN_STREAMS which maps directly to the
standard POSIX Option, _XOPEN_STREAMS.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates the CONFIG_POSIX_SYSLOG Kconfig
variable for CONFIG_XSI_SYSTEM_LOGGING, which has a
direct mapping to the POSIX Option Group XSI_SYSTEM_LOGGING.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Update documentation so that there is a link to
CONFIG_POSIX_ASYNCHRONOUS_IO as it was previously missing.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_SEM_VALUE_MAX in favour of
CONFIG_POSIX_SEM_VALUE_MAX which maps directly to
_POSIX_SEM_VALUE_MAX.
Additionally, we add the Kconfig option
CONFIG_POSIX_SEMAPHORES which maps directly to the
POSIX Option _POSIX_SEMAPHORES.
For consistence, deprecate CONFIG_SEM_NAMELEN_MAX
in favour of CONFIG_POSIX_SEM_NAMELEN_MAX.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This change deprecates CONFIG_POSIX_FS in favour of
CONFIG_POSIX_FILE_SYSTEM, which maps directly to the name of the
standard POSIX Option Group.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The functions fnmatch(), getopt(), getentropy()
and others are grouped into the standard Option Group
POSIX_C_LIB_EXT.
The getentropy() function is currently in-draft for
Issue 8 as of 2021.
https://www.opengroup.org/austin/docs/austin_1110.pdf
Not surprisingly, the POSIX_C_LIB_EXT Option Group
also includes the highly debated strnlen() function.
Moving that function will be deferred until later.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
