The payload of the Register/Register Update message is also formatted as
application/link-format. Therefore it's reasonable to reuse the new
content writer instead of filling the payload manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds a new content writer, application/link-format, which
can be used during the Discovery procedure, to fill the content of the
response payload.
Introducing this new content writer, which encapsulates some of the
details like attribute handling which is different for bootstrap/regular
discovery, allows to unify the discovery handler in the lwm2m_engine,
thus it's no longer needed to have spearate handler functions for
bootstrap/regular discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`.well-known/core` resource is described by the CoAP RFC as an optional
method of resource discovery. The LwM2M specification though makes no
mentionon about this mechanism and provides an alternative method of
resource discovery instead (Device Management Discover, sec 5.4.2, and
Bootstrap Discovery, sec 5.2.7.3).
Since LwM2M does not require to implement `.well-known/core` resource
and it complicates the existing Discovery mechanism (and likely cause a
security concern) remove its handling from the LwM2M implementation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce LwM2M engine helper functions that allows to work with LwM2M
attributes outside of lwm2m_engine.c.
This is a groundwork for application/lwm2m-format content writer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When recvfrom() was called with src_addr != NULL, then source address
was fetched from beginning of net_pkt. This works with native IP stack
obviously. However with offloaded IP stack there is no IP header, so
trying to parse missing IP header results in undefined behavior.
Check if network interface has offloaded IP stack. If positive, then
figure out if there is assigned remote address to network context on
which packet was received. Return this remote address, which SHOULD be
the source address of received packet. Otherwise, return an error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Switch to the new API for delayed work related to DNS queries.
In the previous solution it was assumed that the work item could be
immediately cancelled at the point the query slot was released. This
is not true. We need a secondary condition to record the fact that
the query was completed while the work item was still pending, and an
additional check to detect when the work item completed and the slot
reclaimed.
Also annotate functions to indicate when they require the lock on
query content to be held, add some helpers that abstract core
operations like invoking a callback or releasing a query slot, and fix
some more cases where query slot content was accessed outside of the
new lock infrastructure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
There was no close method implemented for AF_PACKET type
sockets. This meant that calling close() on packet socket
caused NULL pointer access.
This will allow #32949 issue to work properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread UART tx callback has been processed even if it was not
triggered by OpenThread otPlatUartSend function.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Implement MSG_WAITALL flag for stream sockets. Setting this flag on
`recv()` call will make it wait until the requested amount of data is
received.
In case both, MSG_WAITALL all is set and SO_RCVTIMEO option configured
on a socket, follow the Linux behavior, i. e. when the requested amount
of data is not received until the timeout expires, return the data
received so far w/o an error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add option to disable validation callback support by setting the
validation buffer size to 0, which allows to save some memory in case
it's not needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a data validation callback to the resource structure, which can be
registered by an application. It allows to verify the data before
actually modifying the resource data.
If the callback is registered for a resource, the data is decoded into a
temporary buffer first, and only copied into the actual resource buffer
if the validation is successfull. If no validation is required (and thus
no callback registered) the resource value is decoded directly into the
resource buffer, as it used to be.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify the result of option encoding while forming Deregister message
instead of silently ignoring it.
Coverity ID: 215373
Fixes#33096
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
check_interface resets the counter semaphore, but
net_config_init_by_iface first calls check_interface, then inits
the semaphore.
Initialize the semaphore up front to allow the k_sem_reset call
to work properly.
Signed-off-by: James Harris <james.harris@intel.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Add NET_HEXDUMP_DBG/ERR/WARN/INFO macros, then use them for new
MQTT_HEXDUMP_TRC/ERR/WARN/INFO macros.
Log struct mqtt_utf8 using MQTT_HEXDUMP_TRC. One cannot safely log
mqtt_utf8 strings due to no guarantee of a NULL terminator being
present. Also, logging without log_strdup() as if it were a NULL
terminated string asserts when CONFIG_LOG_IMMEDIATE=n. This solves
both issues.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Switch to the new function.
Also initialize the private work structure at build time, rather than
on each iteration (it is not permitted to invoke work API on an
uninitialized work item).
The implementation here is racy: that a work item is pending does not
mean changes since it was first submitted are guaranteed to be seen
when the work item begins (began) executing.
A better solution would be to have transmit_message be able to
determine whether there is unprocessed work. Then the work item can
be submitted unconditionally.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The compiler generates a warning regarding a variable being used
w/o being initialized in certian configuration. According to the logic
that's not the case, so just add some initial value to the variable to
silence the compiler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As network interface array size might be larger than the actual
network interface count, check this condition and ignore those
interfaces that are not in use.
We cannot know for certain how many network interfaces there
are at built time, as the total count is only available at runtime.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network interface index is very useful info to see in
debug prints so add those to debug output.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case the endpoint string provided by the application is longer or
equal to CLIENT_EP_LEN - 1, the strncpy() function will not add the NULL
terminator. As the endpoint buffer is treated as a C-string in other
places in the code, make sure it's NULL terminated by adding NULL
explicitly at the end of the buffer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure query string used by the lwm2m_rd_client is large enough to
encode any query string that can be sent during bootstrap/registration.
As the maximum query string length is related to the endpoint name,
which is limited by `CONFIG_LWM2M_RD_CLIENT_ENDPOINT_NAME_MAX_LENGTH`,
make the query string corellated to the value of this config.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Avoid splitting lines when possible while keeping length below 100
chars. Some other minor style corrections.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The use of a single error variable for RX and TX operations has
shown the OpenThread code to be asserting in some conditions.
This commit splits tx_rx_result into rx_result and tx_result
to avoid such cases.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Added 3 utility functions :
- lwm2m_engine_update_period_service() which updates the period of a
given service.
- lwm2m_engine_update_period_min_observer() which updates the
min_period_sec for a given observe node.
- lwm2m_engine_update_period_max_observer() which updates the
max_period_sec for a given observe node.
Signed-off-by: Thomas LE ROUX <thomas.leroux@smile.fr>
* Added implementations of otPlatCAlloc and otPlatFree methods
necessary for the OpenThread in case of using EXTERNAL_HEAP.
* Added CONFIG_OPENTHREAD_DNSSD_SERVER option to allow enabling
OT_DNSS_SERVER feature.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
This patch adds implementation of socket option used to get
protocol used for given socket (e.g. IPPROTO_TCP). This option
is not defined in POSIX, but it is Linux extension.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch adds implementation of socket option used to get
type of given socket (e.g. SOCK_STREAM).
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Remove `OPENTHREAD_CONFIG_NCP_BUFFER_SIZE` define since it does not
exist in OpenThread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If userspace is enabled, then the TLS context needs to be
made a NET_SOCKET kernel object. Without this the userspace
cannot access TLS sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When handling CoAP Confirmable requests, there is a common
Acknowledgement initialization procedure that repeats for each
response packet initialization. This patch adds a function that
simplifies Acknowledgement initialization procedure encapsulating
repeating code.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
CoAP RFC (RFC7252) states that end points should support
the CoRE Link Format of discoverable resources as described in RFC6690
(refer section 7.2 of the RFC7252).
Fixes#31609
Signed-off-by: Kasun Hewage <kasun.ch@gmail.com>
Only start the network logging backend if the autostarting
option CONFIG_LOG_BACKEND_NET_AUTOSTART is enabled.
Also, call init to make sure that the backend is initialized
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Token and payload are appended from data buffers to a CoAP packet
being encoded. Keyword const was missing for parameters in functions
appending these parts to a packet.
Now token and paylod can be copied to CoAP packet from constant
buffers, that can be stored in ROM.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch introduces COAP_TOKEN_MAX_LEN definition in coap.h file.
This definition replaces magic number across CoAP protocol
implementation and CoAP samples.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Add Kconfig option to randomize the initial ACK timeout, as specified in
RFC 7252. The option is enabled by default.
Additionally, finetune the default value of COAP_INIT_ACK_TIMEOUT_MS
option, to match the default ACK_TIMEOUT value specified by the RFC
7252. The RFC does not specify the minimum/maximum value of the
ACK_TIMEOUT parameter, but only suggests it should be no lower than 1
second, so adjust the option range to reflect this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
