Those are added by sanitycheck, no need to have them enabled in the
project by default.
CONFIG_DEBUG is causing issues on qemu_nios2, see #5743.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The demo can be configured to use different object types for its
synchronization, so test all of them.
The demo can also be configured to work with static objects or dynamic
objects, byt default the demo uses dynamic objects, add a test for
static objects.
Also, the demo can be configured to work with threads of the same
priority or not, so enable both options for testing
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not build for some unsupported architecture and exclude ARM qemu
platform due to bug #5735.
STACK_ALIGN 0x8
MPU STACK GUARD Test
Canary Initial Value = 0xf0cacc1a threads 0x200010e0
Canary = 0x20000240 Test not passed.
***** BUS FAULT *****
Executing thread ID (thread): 0x200010e0
Faulting instruction address: 0x209c
Imprecise data bus error
Fatal fault in thread 0x200010e0! Aborting.
***** HARD FAULT *****
Fault escalation (see below)
***** BUS FAULT *****
Executing thread ID (thread): 0x200010e0
Faulting instruction address: 0x1f4
Imprecise data bus error
Fatal fault in ISR! Spinning...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Evaluate output from sample and record success/failure.
Enable on other platforms, this should not be whitelisted.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The output of those samples can be parsed and verified by sanitycheck,
so lets use the console harness for this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample application allows to test vl53l0x distance sensor.
By default it is built with disco_l475_iot1 board as it is
built-in.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
The code couldn't really build with only CONFIG_NET_IPV4 or
CONFIG_NET_IPV6 enabled, because some parts weren't covered
by #ifdef's. Regroup the code to get it covered.
Also, improve error/notice messages.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
By default CONFIG_MPU_ALLOW_FLASH_WRITE=n so the example must have been
falling on any write to flash.
This patch adds CONFIG_MPU_ALLOW_FLASH_WRITE=y to project configuration.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This sample implements a custom module, so rename it to allow for other
samples with specific features.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to be able to document the build on Windows and UNIX
systems, slight variations are required on the app commands
that are used throughout the documentation system.
This includes getting rid of the prompt symbol and providing commands
for both UNIX and Windows operating systems.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add configuration for zperf sample allowing to build USB dongle with
zperf for testing.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
At the moment CONFIG_SYS_LOG_USB_LEVEL name does not specify that this
is log level for the Device Stack. Make it clear renaming to the
proper name.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove SPI_*_IRQ_PRI from tests and samples.
Using DT to get the *_IRQ_PRI, we can't
override it using Kconfig.
If needed, use a BOARD_NAME.overlay file to
override default values.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Since no GPIO trigger is configured in hts221 sample application,
update prj.conf to enable TIGGER_NONE flag
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A very old reference to former net stack was still lurking around.
Removing it.
Taking the opportunity to clear up dependencies.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Having a library being GLOBAL, although not default behaviour, or
necessary for the sample, is expected behaviour for a library. It is
expected that like normal libraries, the target name will be
accessible from outside of the CMakeLists.txt file that created it.
Since samples are used as reference code, we specify GLOBAL so that
libraries are created with this intuitive behaviour.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The basic/threads sample is printing a log that looks like this:
Toggle USR0 LED: Counter = 0
Toggle USR1 LED: Counter = 0
Toggle USR0 LED: Counter = 1
Toggle USR0 LED: Counter = 2
Toggle USR0 LED: Counter = 3
Toggle USR0 LED: Counter = 4
From that log you would think that it was logging when leds were
blinking, but actually the led-threads might have crashed, and it
would just continue logging anyway. All it's doing is executing
printk's at roughly the same frequency as the LED's are blinking.
This patch rewrites the sample to use a FIFO so that the printk's only
trigger if the LEDs are actually blinking.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Depending on a path inside the Zephyr tree to determine if we are a test
does not scale. Also some samples were marked as TEST while they are
not, just to get some options defined for tests.
Idenitfying a test will be addressed in another patch introducing
CONFIG_TEST.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This samples was failing to build with Ninja because Ninja detected
that libmylib.a was missing. Adding it as a BYPRODUCT in the
ExternalProject fixes the issue.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
mbedTLS include directories will now default to be in the 'app'
include path when mbedTLS has been enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Right now in FIN_WAIT1 state, if we receive FIN+ACK message, then
tcp state changed to FIN_WAIT2 on ACK flag and immediately on FIN
flag state changed to TIME_WAIT. Then final ACK is prepared and sent
(in queue at-least) to peer. Again immediately state changed to
TCP_CLOSED, where context is freed. net_context_put frees context
and releases tcp connection. Final ACK packet which is in queue
is dropped.
As a side effect of freed ACK packet, peer device keep on sending
FIN+ACK messages (that's why we see a lot of "TCP spurious
retransimission" messages in wireshark). As a result
of context free (respective connection handler also removed), we see
lot of packets dropped at connection input handler and replying with
ICMP error messages (destination unreachable).
To fix this issue, timewait timer support is required. When tcp
connection state changed to TIMEWAIT state, it should wait until
TIMEWAIT_TIMETOUT before changing state to TCP_CLOSED. It's
appropriate to close the tcp connection after timewait timer expiry.
Note: Right now timeout value is constant (250ms). But it should
be 2 * MSL (Maximum segment lifetime).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remove build_only and add harness type needed for the sample/test to
allow running with sanitycheck and on devices once we have harness
support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
