warning: format '%d' expects argument of type 'int', but argument 3
has type 'size_' {aka 'long unsigned int'} [-Wformat=]
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
After several fixes of the re-ordering logic in TCP, the receive queue
works as intended and cleans itself up properly. Previously the default
timeout was 100 ms, which pretty much disables it for real applications.
Increase the timeout to 2 seconds to actually enable it for in practice.
This should help pass much more of the Maxwell Pro tests.
This is the first step before removing the timeout completely.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The `fcntl.h` header has never been a part of ISO C so move it to
`include/zephyr/posix`.
To ensure a smooth migration, a header was left in
`lib/libc/minimal/include` that prints a deprecation warning.
Users should either include `<zephyr/posix/fcntl.h>` or switch to
`CONFIG_POSIX_API=y`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
websocket_recv_msg() is reworked with using fsm. Now the function
return 0 when payload is empty, -ENOTCONN if socket close. Receiving
empty ping and sending empty pong were added in tests.
Fixes#52327
Signed-off-by: Grixa Yrev <grixayrev@yandex.ru>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests turn on mbedtls and require ajusting min flash
requirements to prevent twister from trying to build them on
platforms without required amount of flash.
Fixes: #51421
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
As the UDP test suite is mostly intended to run over loopback, use
loopback addresses and skip configuration of other addresses.
For the test cases that use fake Ethernet iterface the configuration
is done manually anyway, so just rename the symbols to avoid
collission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the TLS test suite is intended to run over loopback interface, use
loopback addresses and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the TCP test suite is intended to run over loopback interface, use
loopback addresses and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the test suite is intended to run over loopback interfce, use
loopback address and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the test suite is intended to run over loopback interfce, use
loopback address and skip configuration of other addresses.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The test suite already configured the dummy interfaces manually, so it's
only needed to provide respective address strings, no need to involve
NET_CONFIG_SETTINGS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The can_frame and can_filter structs support a number of different flags
(standard/extended CAN ID type, Remote Transmission Request, CAN-FD format,
Bit Rate Switch, ...). Each of these flags is represented as a discrete bit
in the given structure.
This design pattern requires every user of these structs to initialize all
of these flags to either 0 or 1, which does not scale well for future flag
additions.
Some of these flags have associated enumerations to be used for assignment,
some do not. CAN drivers and protocols tend to rely on the logical value of
the flag instead of using the enumeration, leading to a very fragile
API. The enumerations are used inconsistently between the can_frame and
can_filter structures, which further complicates the API.
Instead, convert these flags to bitfields with separate flag definitions
for the can_frame and can_filter structures. This API allows for future
extensions without having to revisit existing users of the two
structures. Furthermore, this allows driver to easily check for unsupported
flags in the respective API calls.
As this change leads to the "id_mask" field of the can_filter to be the
only mask present in that structure, rename it to "mask" for simplicity.
Fixes: #50776
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit updates the `getaddrinfo` test to use the newlib nano
variant when available because it can run out of RAM with the newlib
full variant on the platforms with a small RAM.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Align the struct socketcan_frame to most recent Linux kernel.
Compatibility with legacy can frames is maintained because the DLC is
equal to payload length for up to 8 bytes. Only the data buffer is
extended, resulting in larger size when CAN FD is enabled.
Signed-off-by: Martin Jäger <martin@libre.solar>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When the NO_DELAY option is enabled, the retransmitted packets
will likely be differently broken down from the packets transmitted
initially. This provides a nice stress test for the out or order
reception logic.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Instead of waiting for the retransmit timeout, retransmit as soon as
missing data is deduced based on a triple-duplicate ACK.
Increase the number of buffers in the testcase, to allow for at least 4
packets in flight to trigger the triple-duplicate ACK.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
This change introduces test coverage for IEEE 802.15.4 AF_PACKET support
and IEEE 802.15.4 security operation.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Decouple the zephyr/net/socketcan.h and zephyr/drivers/can.h header files
by moving the SocketCAN utilities to their own header.
This is preparation for including the SocketCAN types defined in
socketcan.h in a native posix (Linux) SocketCAN driver context without name
clashes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
SocketCAN does not support CAN-FD data lengths of up to 64 bytes
payload. Decouple the maximum supported SocketCAN data length from the
maximum supported CAN controller data length.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN header from socket_can.h to socketcan.h to better
match the naming of the functionality.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN utility functions to reflect the new naming of the CAN
controller API and SocketCAN API data types.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN data types to "socketcan_*" in preparation of renaming
the low-level CAN controller API data types.
This breaks the naming compatibility with the similar SocketCAN data types
from the Linux kernel, but Zephyr and Linux SocketCAN are not 100%
compatible anyways (only the structure fields are compatible, extended
functionality such filtering, error reporting etc. are not).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the SocketCAN tests from tests/drivers/can/utilities to
tests/net/socket/can to match the location of the code under test.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
There are several test cases that create fake ethernet devices and
expect the fake device to be the only ethernet device enabled. Some
tests handle this be explicitly disabling actual ethernet drivers,
but this doesn't scale well.
Change drivers/ethernet/Kconfig to utilze a menuconfig option that
wraps all the drivers. This allows us for those test cases that
don't want any actual ethernet drivers to disable them with a
simple CONFIG_ETH_DRIVER=n.
Note, the fake ethernet devices utilize CONFIG_ETH_INIT_PRIORITY so
we have it outside of the 'if ETH_DRIVER' block.
Signed-off-by: Kumar Gala <galak@kernel.org>
Disable unstable tests cases for mps2_an385, which fail sporadically
due to timer stability issues on that platform (see #48608).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Loosen some timing constraints in order to hack arond spurious
failures in upstream Zephyr's CI while working on an unrelated task.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit disables the `net.socket.tcp.preempt` test on the
`mps2_an385` platform because it fails very frequently due to the
system timer stability issues.
For more details, refer to the issue zephyrproject-rtos/zephyr#48608.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It can happen that two similar stacks enter a retransmission cycle
due to a packet collision. If the transmission timeout is the same
both stacks will retry at the same moment resulting in another
collision.
By introducing a randomized retry timeout, the chance of
a second collision is reduced and it reduces furter the more
retransmissions occur.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Apply an exponentially increasing wait time between tcp retries. This
is a good balance between reacting fast to single lost packets and reduce
the network load when an outage takes a little longer. It also allows the
connection to survive a longer interruption with less retransmissions.
Update the test to accommodate for the increased socket closure timeout
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Previously the test waited for the worst case time till all sockets
where closed, this causes the test to wait for a long unnecessary time.
Secondly it does not ensure the sockets are actually closed before
starting the next tests.
For tests that are not conducted in user mode, wait until all the contexts
are close for a maximum time. If the contexts are not closed in time raise
an explicit assertion.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
