UARTs are mostly assumed to exist in Zephyr but some hardware wishes
to exclude the tests. Adds a uart tag to the test case to ensure
ignoring is possible.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Align configuration for nrf52840dk to use the same loopback pins
for uart_async_api and uart_mix_fifo_poll tests.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix all line-length errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(line-length)'
Using a limit is set to 100 columns, not touching the commandlines in
GitHub workflows (at least for now).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Currently the test only pushes 1 byte in each call to uart_fifo_fill().
This doesn't test cases where the driver can accept more than 1 byte
in the fifo.
Instead, try to push all the bytes in the uart_fifo_fill() call.
Internally the driver may only accept 1 byte, in which case the test
will be equivalent as before the patch.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit configures the testcase to run on the
stm32u5x5 target boards. USART2 is selected
Pins Tx and Rx (PD5 PD6 on CN9) must be connected on the HW board
to pass the test.
The USART transfer uses the GP DMA transfer with request
27 and 26 on 2 DMA channels (0-15).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit configures the testcase to run on the
stm32u585 target boards. USART3 is selected
Pins Tx and Rx (PD8 PD9 on CN14) must be connected on the HW board
to pass the test.
The USART transfer uses the GP DMA transfer with request
28 and 29 on 2 DMA channels (0-15).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Many driver samples or tests only had 'drivers' as the tag, without a
tag indicating what driver that is exactly, so add some missing tags.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Configure through an overlay file, the nucleo_wb55rg board
for running the tests/drivers/uart/uart_async_api.
DMAMUX is used for transfer on channels 0 & 1 with
LPUART peripheral request 17 & 16.
No hw flowcontrol for this test.
Connect pin A0 & A1 of CN8 to PASS the test.
Note that I2C3 pin assignment might conflict (PC0 & PC1).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for the Feather M0 LoRa board, including support of its
Semtech Lora radio. Tested the radio using a pair of boards.
Signed-off-by: Miguel Dardenne <miguel.dardenne@gmail.com>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Initialize devices at compile time. Also fix some ready check problems
(e.g. in async test readiness failure just resulted in a printk, but
test continued...).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Also, fixed issue that change exposes with SEGGER RTT testing
in that in some platforms the device getting selected for the
RTT test was not the RTT device.
Signed-off-by: Kumar Gala <galak@kernel.org>
uart_async test and spi_loopback test require UART and SPI
with an ASYNC option.
The SAM0 UART/SPI driver requires configuring DMA support.
Arduino MKRZero is not DMA configured like other SAM0 boards.
We exclude it from the tests.
ea36f9b and f4c5bdf already exclude other SAM0 boards from these tests.
Arduino MKRZero also followed these PR policies.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
This PR adds support for the RT1060_EVKB as a variant of the RT1060 EVK.
Blinky app tested locally on RT1060_EVKB.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
This sets the dts of dma for using the uart 6 asynch api.
The stm32f746 has a dma V1 with request 5 for Tx/Rx usart6
The Tx&Rx pins (PG14, PG9) of the usart6 are connected
on the nucleo_f746zg board to pass the test
The CONFIG_DCACHE=n must also be set to disable Dcache.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This sets the dts of dma for using the uart 6 asynch api.
The stm32f767 has a dma V1 with request 5 for Tx/Rx usart6
The Tx&Rx pins (PG14, PG9) of the usart6 are connected
on the nucleo_f767zi board to pass the test
The CONFIG_DCACHE=n must also be set to disable Dcache.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
As now the CONFIG_NOCACHE_MEMORY is not responsible for controlling the
data cache on STM32H7 SoC, the CONFIG_DCACHE=n must be set explicitly
to preserve previous behavior as UART driver is not using no-cache
buffers.
Considering the above comment, the CONFIG_NOCACHE_MEMORY can be safely
removed.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
if DMA support is not present, LPUART driver will not compile when async
API support is required. Skip test cases when dma support is not present
and LPUART driver is enabled.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
add nxp,loopback mode to boards with LPUART. This will enable testing
the UART async api without a physical loopback connection.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
define uart peripheral that can be connected as a loopback using
external jumper for all boards this test can be run against.
Additionally, all RT boards require DMA memory to be noncacheable. Move
SRAM to DTCM for all RT10xx series boards, and to noncacheable OCRAM for
RT11xx series.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
This update Atmel sam serial drivers to use pinctrl driver and API. It
updates all boards with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Intention of the test is to abort rx few bytes after start of
transmission (before it is completed). Previously, thread was busy
waiting after start of TX and aborted RX from that context. However,
it may happen that CPU is busy handling UART transfer and
k_busy_wait prolongs beyond full transfer which results in test
failure.
Move rx_abort to k_timer timeout which is run in interrupt
context.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a test case that ensures that uart_rx_enable() can be successfully
called after RX is disabled with uart_rx_disable() and also when it is
disabled automatically after the provided RX buffer is filled up.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Modifications to use RO buffer in the test. Added configuration
which is using RO buffer for uart_tx.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
