A variable was defined directly after a label in two case statements,
resulting in build warning with certain compilers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Check data buffer size and return error if
* buffer size is too small for opaque or string data type
* buffer size is not equal to res data length when data type
is fixed size
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Check return values from lwm2m_rd_client_pause() and
lwm2m_rd_client_resume() when engine thread suspend is requested.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
RD-Client is essential part of LwM2M specification and it can't
be disabled from LwM2M engine. This commit deprecates Kconfig
variable CONFIG_LWM2M_RD_CLIENT_SUPPORT and removes
all usages if it.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
`sntp_simple()` was forcing to resolve SNTP-server's URL into IPv4 address
addresses. This was not allowing sntp_init() to succeed in case the system
did not support IPv4 addresses (returning EPFNOSUPPORT, ie. Protocol
Family error).
Now by default SNTP has unspecified family type and it relies on
`net_getaddrinfo_addr_str()` to be able to resolve literal server URLs
into the supported IP family type.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
Setting `hints.ai_family` to `AF_UNSPEC` was causing
`net_getaddrinfo_addr_str()` and in turn `getaddrinfo()` to resolve the
literal SNTP SERVER first into IPv4 and then (if supported) IPv6 addresses.
This was causing useless waste of time and memory in case IPv4 was not
supported. In addition, in case IPv4 addresses were not supported, other
system components (eg. SNTP) could fail due to the DNS returning IP
addresses with unsupported family type (ie. IPv4).
Now, if address family is not explicitly set to `AF_INET` (ie. IPv4), then
no attempt is made to resolve SNTP server address into an IPv4 address.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
Add shell command
cache :Enable data cache for resource
cache PATH NUM
PATH is LwM2M path
NUM how many elements to cache
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Fixed problem for matching path url with or without '/'
by change time series data structure to use struct lwm2m_obj_path.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Call lwm2m_send_message_async() from function
lwm2m_information_interface_send() and remove duplicate code.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
lwm2m_send_message() sends a message directly to the socket. Remove
the function from public API and combine the code with
socket_send_message().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Now that we a proper API, shell is just optional, so, make the
dependency optional by refactoring the code.
Also, add a build test combination in twister.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Fix LwM2M rd client stop call hang when Queue client is at
RX_ON_IDLE_STATE. Added miossing connection resume for
de-register functionality.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Check receiving buffer size and return error if
* buffer size is too small for opaque or string data type
* buffer size is not equal to data lenght when data type is
fixed size
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Instead of calling zperf shell initialization routine on the first
command execution, initialize it during system boot, along with other
zperf submodules.
Remove redundant IP address configuration on an interface. The default
configuration relies on NET_CONFIG module, so there's no need to set the
address manually in zperf.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Zperf shell functionality is now encapsuled within a single file,
therefore it no longer makes sense to have a separate shell_utils
file.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make the TCP/UDP server functionality restartable. Provide a public API
to stop the TCP/UDP server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add public API for zperf download functionality. The TCP/UDP server
modules are decoupled from shell, allowing to trigger download directly
from the application code. The shell submodule makes use of this new
public API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add shell option to the UDP/TCP upload command, which allows to execute
the upload asynchronously. This allows to unblock the shell for other
commands during the upload.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit defines a public API for zperf upload functionality. The
UDP/TCP uploader modules are decoupled from shell, allowing to perform
uploads directly from the application code. The shell submodule makes
use of this new public API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
websocket_recv_msg() is reworked with using fsm. Now the function
return 0 when payload is empty, -ENOTCONN if socket close. Receiving
empty ping and sending empty pong were added in tests.
Fixes#52327
Signed-off-by: Grixa Yrev <grixayrev@yandex.ru>
Since 6c30c9ac47 (samples: net: zperf:
Rewrite upload part to use sockets), zperf uses SO_RCVTIMEO in UDP mode,
hence must depend on/enable support for it.
Without SO_RCVTIMEO support, zperf fails like this:
> nb_packets=47 delay=188964 adjust=-13
> setsockopt error (109)
> setsockopt error (109)
> -
> Upload completed!
> LAST PACKET NOT RECEIVED!!!
> Statistics: server (client)
> Duration: 0 us (10.19 s)
> Num packets: 0 (50)
> Num packets out order: 0
> Num packets lost: 0
> Jitter: 0 us
> Rate: 0 Kbps (9 Kbps)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The sequence id from iperf starts with 1. The commit changes the
initial value of "next_id" in zperf from 0 to 1. In addition, the
error output of "error" and "out of order" packets is corrected.
Signed-off-by: Yanqin Wei <Yanqin.Wei@arm.com>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The pointers to resource values should not be used
directly to update the values.
This will break observations if the server is trying to
observe changes during a software update.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
This commit adds an implementation of MQTT-SN v1.2.
The specification is available on oasis-open.org:
https://www.oasis-open.org/committees/download.php/66091/MQTT-SN_spec_v1.2.pdf
The following things are missing in this implementation:
- Pre-defined topic IDs
- QoS -1 - it's most useful with predefined topics
- Gateway discovery using ADVERTISE, SEARCHGW and GWINFO messages.
- Setting the will topic and message after the initial connect
- Forwarder Encapsulation
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
If gcc compiler option -Werror is used the warning,
declared inside parameter list will not be visible outside of this
definition or declaration [-Werror]
is treated as error, for
sockets_internal.h:18:28: ‘struct net_context’
sockets_internal.h:19:32: ‘struct zsock_pollfd’
fdtable.h:108:17: ‘struct k_mutex’
Signed-off-by: Christoph Schnetzler <christoph.schnetzler@husqvarnagroup.com>
Added support for handle case when all data is not possible to
add in 1 message for Send and Observed Notification.
Notification continuous pending timeseries data is triggred
by iMIN attribute.
Send Operation generate continuous message in multiple lwm2m
message.
Normal Read by server only report back latest stored data.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Prints when traffic is ongoing cost a few Mbps due to writing to UART as
observed by the profiler, so, disable them by default.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Rename timer object instance create funciton `timer_create` to fix a
name collision regression with a POSIX function in `timer.h`. The issue
was introduced with commit 73a637eda0 when
first including`timer.h` into `lwm2ms.h`.
Signed-off-by: Marc Lasch <mlasch@mailbox.org>
sizeof(time_t) can vary depending on architecture/libc being in use,
therefore LwM2M should not assume time_t data type size. Instead of
using magic numbers, use a proper sizeof.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
