In case that CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SNK_COUNT or
CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SRC_COUNT is set to NULL, the
unicast client implementation in the shell would have compile
warnings, since the arrays would be 0 and we would attempt to
access it some places (or rather the compiler/linker would
think that, but it would never happen at runtime).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The macro BT_CONN_INTERVAL_TO_MS was used a fair amount
of places, but it often was used with integers. This meant
that sometimes the resulting (integer) value would be
incorrect, as something like 7.5ms interval would not
be properly stored as a integer in millisecond units.
Adding BT_CONN_INTERVAL_TO_US allows users to still use
integers to store the result, but in a more accurate unit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the ISO packing field when creating a unicast group.
This refactors the structure of the unicast group create,
as it now takes both the packing as a group parameter, as well
as an array of stream-specific parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This changes HAS registration to be dynamic and let's the
application set Hearing Aid Type and binaural features.
Often, devices are flashed with generic firmware with some
features stored post factory production, requiring
the settings to be moved from compile time to run-time.
This change will increase the RAM usage as the GATT
service is moved from ROM to RAM.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Co-author: Soren Engquist <soren@engquist.dk>
Moved the name filter last, as that it the most expensive
to use.
The address filter has almost been moved after the more
trivial checks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add filtering for the pa_interval. This can be used to
easier find devices that are advertising with periodic
advertising.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of printing every audio packet (typically
arriving every 7.5 or 10ms), we now only print every 100th.
Ideally we would add support for changing the number of
"skippe" audio packets at runtime in a shell command, but
that will be postponed.
Ideally we would also have a rx_cnt per stream, but that will
also be postponed to the future, and should be fixed with e.g.
the sequence number (seq_num) as well.
Finally this commit also adds a verification if the currently
incoming data packet contains the same ts or seq_num of the
previous one, and print if it does, as this indicates that
we are receiving some invalid data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The lc3_start_time and lc3_sdu_cnt were not reset properly,
causing it to fail when trying to do start_sine after calling
stop_sine.
This commit also ensures that the sending of the sine wave is
stopped once the stream is either released or stopped.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rather than exposing shell commands that take an opcode and
an optional parameter, the shell commands are now explicit
so that it is easier for a person to use the shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `audio connect` shell command did not really do
anything anymore, and has thus been removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the unicast audio shell commands were guarded by
CONFIG_BT_AUDIO_UNICAST_CLIENT and only usable by the client.
This moves some of the commands to a CONFIG_BT_AUDIO_UNICAST
guard instead, so that they are usable for builds with just
the server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes VCP Volume Renderer linker error that was seen if built
with VOCS and/or AICS support disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Remove the struct bt_vcp pointer from the volume
renderer API, as there is only ever a single
Volume Renderer instance on a device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Split the `bt_vcp_cb` struct into separate structure for
the volume controller and the volume renderer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The VCP server, known as the volume renderer, has a
more explicity bt_vcp_vol_rend API naming scheme now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the bt_vcp_vocs API as it did the same as the
bt_vocs API, and did not really any functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The AICS functionality can be exercised using the
bt_aics API instead. These functions did very little
besides cluttering up the bt_vcp API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renames almost all occurences of VCS to VCP, as we want to
use the profile as the namespace for volume control.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename vcs.h to vcp.h to better detail what the
file contains, as it is more than just VCS. This also
renames the Kconfig file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This fixes build error that happens when shell is built without CAP
Acceptor Set Member support. The cap_acceptor.c contains shell commands
for Set Member only, thus it's OK to build the code if
CONFIG_BT_CAP_ACCEPTOR_SET_MEMBER is set for now. This can be modified
in the future when shell will be extended with other
Set Member non-specific CAP commands.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Use the service instance struct instead of the more generic
`bt_csip` for the CSIP set member API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed remaining structs and functions that are not
for the set coordinator to use the set member CSIP
role name.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed the coordinated set implementation to use the
profile (CSIP) name instead of the service (CSIS) name, as
the former is more general.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updates the broadcast source API to create subgroups and
to set BIS specific codec configuration
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the local advertising address to bt_le_ext_adv_get_info.
This may help with debugging, but is also needed to
properly support something like the BAP Broadcast Assistant.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add shell support for RPA expire callback.
This prints a message when the callback is called on the specific
advertising set.
Add a command to control the return value of this callback for a
specific advertising set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename BASS to BAP Scan Delegator and BASS Client
to BAP Broadcast Assistant. This is the first step towards
integrating the BASS with the rest of BAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes the global cur_mcs_inst and replace it
with lookup functionality.
This fixes an issue with bt_mcc_discover_mcs not being able
to be called more than once, as well
as streamline the implementation significantly.
This is also the first step towards not only supporting
multipe MCS instances for a single device, but also a
step towards handling multiple devices.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CSIS client shell did not print the pointers of the instances
discovered, which are needed for future commands.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The metadata in the presets are just defined
using the BT_AUDIO_LC3_PRESET which ultimately
uses BT_CODEC_LC3_CONFIG_META which correctly
sets the data pointer, but the `value` array is unused.
So we cannot just update the `value`, as that is actually
not used in those cases, and the `data` pointer is `const`.
The solution is to a copy of the metadata data, and use
the copy when calling the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds common bt_audio_iso pool that will be used across all the
roles/profiles. The pool range is dependent on the CONFIG_BT_ISO_MAX_CHAN
which is the maximum number of ISO connections the host can maintain.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Select BT_TICKER_NEXT_SLOT_GET when BT_LL_SW_SPLIT enabled
and building applications with shell support (BT_SHELL).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add back erroneously removed ll-addr command, when removing
legacy Controller, which is provided when using Zephyr
Bluetooth Low Energy Controller to read the random and
public address set by the Host, and used by the Controller.
Relates to commit b67a31e411 ("Bluetooth: controller:
Remove legacy LL").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This changes the API to use proper naming convention, as the code has
been moved out of capabilities.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
There is no point of having dedicated source file that is PACS
dependent. This moves all of the code from capabilities.c to pacs.c.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The CAP initiator will now discover, or return a
known, CSIS instance included by CAS (if any).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The API will now take a simple bt_conn instead of a
set member struct. This is due to the set member struct
being moved to the stack. The reasoning for this is that
having the struct in the stack, rather than in the
application, the stack itself can initiate the CSIS
discovery which is useful if the remote device
has a service that includes a CSIS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
