Disables having USB enabled for boards that configure USB CDC for
console, shell or logging at bootup in applications that enable USB
to prevent a conflict arising whereby USB is registered from
multiple points and later calls fail.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
There is no need to block the thread for a second.
Let it sleep for 100 milliseconds, which should be enough
to set the host baud rate.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The old random timer test was not random-looking
enough on some platforms.
Replace with new test which is psuedo-xoshiro.
The generator is still deterministic
and does not depend on entropy at all,
but should look more random for testing.
Change name of generator tree-wide also.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix all thruthy errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(truthy)'
This only accepts true/false for boolean properties. Seems like python
takes all sort of formats:
https://github.com/yaml/pyyaml/blob/master/lib/yaml/constructor.py#L224-L235
But the current specs only mention "true" or "false"
https://yaml.org/spec/1.2.2/#10212-boolean
Which is the standard yamllint config.
Excluding codeconv and workflow files, as some are using yes/no instead
in the respective documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove Kconfig file samples/subsys/usb/usb_pid.Kconfig added in
the commit e5cbe6a9e7 ("usb: cdc: Add unique PIDs for each sample")
with the motivation to have a separate ID for each sample supposedly
to be recognizable by the host.
The new USB support does not use the options, VID/PID is set
directly in the application. As a note, it is not necessary to have
unique PID for each sample, especially for the well known USB classes.
Replace the individual Kconfig options in the documentation
by a table with the references to the samples and PIDs.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This add TFM cmake definitions to build mass storage sample for non
secure firmware boards versions. The stm32l562e_dk_ns board was used
to demonstrate. It uses SDMMC/SD with TFM profile large. Tests were
conducted using a 2GB transflash card with FAT-32 partition.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
This enables usb and usb_device tag for tests. It explicitly disable
samples/subsys/usb/dfu for non-secure version of this board due to
building errors, which can be explored in future.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
It was found that the existing regex check was not enough to validate
correctness of execution of mass samples. Tests would pass even when
a filesystem failed to be mounted. An additional line to check is added
to validate the setup of a filesystem.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Remove all obsolete DISK_FLASH* Kconfig options.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add flash disk description to overlays. Specify custom flashdisk
partition for fat fs api test to match the Kconfig values, because
native posix storage partition is too small for FatFS filesystem.
Co-authored-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Exclude lpcxpresso55s69_cpu0 from the USB DFU tests, this triggers a
build assert due to unsupported flash write block size (512 bytes,
mcuboot supports 8 to 32).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change the applications to get device from the
compatible of the zephyr_udc0 node.
It is defined by the DTC_OVERLAY_FILE="app.overlay"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix building this sample on bl5340_dvk_cpuapp_ns and
pinnacle_100_dvk. On these boards the NORDIC_QSPI_NOR
driver needs to be enabled for the sample to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
All in tree device drivers use some form of DEVICE_DT_GET
so we no longer need to require label properties.
Signed-off-by: Kumar Gala <galak@kernel.org>
The sample proviades required overlays only for 3 platforms.
Therefore, flash scenarios can only work on those 3 platforms.
To reflect this, platform_allow has to be used instead of
integration_platforms, so boards without overlays are not picked up
into a scope.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add integration platforms to mass_flash_fatfs and mass_flash_littlefs
tests as these options are tuned for specific platforms.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Test sections, mass_flash_fatfs and mass_flash_littlefs,
and corresponding Kconfig options are mixed up.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Function uart_fifo_read() returns 'int' (it may return negative values
in error cases). Its return value is stored in the variable 'read' that
is, however, of type 'size_t'.
Change the type of the variable 'read' from 'size_t' to 'int' to
accomodate proper handling of uart_fifo_read() invocation.
Coverity-CID: 248408
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Some information in the USB DFU sample was out of date.
Also added some example lines for the Permanent download and automatic
reboot features.
Signed-off-by: Martijn Stommels <martijn@martijnpc.nl>
This commit adds the USB_DFU_PERMANENT_DOWNLOAD and USB_DFU_REBOOT and
symbols.When the permanent download symbol is enabled, slot 1 will be
marked as confirmed. With the reboot symbol enabled, the devices
automatically reboots after the download is completed.
The functionality is split into two symbols to allow the automatic
reboot without confirming the image. This enables image confirmation via
another channel. For example via the shell’s Mcuboot commands.
This functionality allows downloading an image to the device without the
user having to interact with the device. It is useful in cases where
ease of use is more important then safety. For example when using USB
download for daily development. This is especially applicable for
devices with a closed case.
The changes were tested on an nrf52840dk. The following line can be used
to build the USB DFU example with the symbols enabled.
west build -b nrf52840dk_nrf52840 zephyr/samples/subsys/usb/dfu \
-d build-dfu -- -DCONFIG_BOOTLOADER_MCUBOOT=y \
-DOVERLAY_CONFIG=overlay-reboot-permanent.conf \
-DCONFIG_MCUBOOT_SIGNATURE_KEY_FILE\
=\"bootloader/mcuboot/root-rsa-2048.pem\"
Fixes#41921
Signed-off-by: Martijn Stommels <martijn@martijnpc.nl>
Reserve the upper 8 bits of gpio_dt_flags_t for SoC specific flags and
move the non-standard, hardware-specific GPIO devicetree flags (IO
voltage level, drive strength, debounce filter) from the generic
dt-bindings/gpio/gpio.h header to SoC specific dt-bindings headers.
Some of the SoC specific dt-bindings flags take up more bits than
necessary in order to retain backwards compatibility with the deprecated
GPIO flags. The width of these fields can be reduced/optimized once the
deprecated flags are removed.
Remove hardcoded use of GPIO_INT_DEBOUNCE in GPIO client drivers. This
flag can now be set in the devicetree for boards/SoCs with debounce
filter support. The SoC specific debounce flags have had the _INT part
of their name removed since these flag must be passed to
gpio_pin_configure(), not gpio_pin_interrupt_configure().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Kconfig options now belong to the Kconfig domain, therefore, the
:kconfig:option: role needs to be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Firmware uploading to the host may not always be desired,
disable it by default.
Enable it for existing USB DFU sample to keep
the usual behavior, add note about new option to README.rst.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix wrong extra_args definitions wich cause that this args were not used
by CMake during building this samples via Twister in CI.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Replace deprecated macro USBD_CFG_DATA_DEFINE by
USBD_DEFINE_CFG_DATA which places usb_cfg_data structures
in specific iterable section.
Replace __usb_data_start, __usb_data_end usage patterns
size_t size = (__usb_data_end - __usb_data_start);
for (size_t i = 0; i < size; i++) {...}
by
STRUCT_SECTION_FOREACH(usb_cfg_data, ...) {...}
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the current USB device support, the sizes of bulk endpoint
are mostly configure through Kconfig and do not care if a device
is high-speed capable. The information if a USB device controller
supports high-speed comes from devicetree. Add a Kconfig option to
map this information and configure bulk endpoint sizes
accordingly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
