Currently MCUboot and system reset are invoked directly in the sample
applicatiion. This introduce 2 new methods to isolate system from
application.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The CP app sends PD a "command" and the PD responds to it. Some times,
the PD has something that it wants to tell the PD which it does so in
response to POLL command. Both CP and PD apps need a way to exchange
these info over the OSDP bus. To archive this we will introduce what are
called "events" that allow the PD app to enqueue and CP app to get
notified.
This is analogous to the incumbent "commands" abstraction where, the CP
app enqueues a command and the PD app gets notified of it.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Add CONFIG_USBC_CSM_SINK_ONLY=y to Sink's sample prj.conf.
This selects the Sink only Connection state machine
for the Sink sample and it explicitly show the user
of the Sink sample how the connection state machines are
selected.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Because posix emulated execution is significantly faster than posix
emulated timer and benchmark finishes before even the first tick occurs.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
Needed because benchmark finishes faster than a tick, especially on
emulated platforms where tick rate is 100Hz. Output units are also updated
to print numbers with less digits.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
Stack sizes need to be dependent on something arch specific such as
idle stack size because they're smashing their stacks.
Signed-off-by: Alp Sayin <alp.sayin@amd.com>
Disables having USB enabled for boards that configure USB CDC for
console, shell or logging at bootup in applications that enable USB
to prevent a conflict arising whereby USB is registered from
multiple points and later calls fail.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
There is no need to block the thread for a second.
Let it sleep for 100 milliseconds, which should be enough
to set the host baud rate.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The old random timer test was not random-looking
enough on some platforms.
Replace with new test which is psuedo-xoshiro.
The generator is still deterministic
and does not depend on entropy at all,
but should look more random for testing.
Change name of generator tree-wide also.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix few duplicate keys warnings in sample.yaml and testcase.yaml files,
this is going to enable some tests that were otherwise being
unintentionally ignored.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all line-length errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(line-length)'
Using a limit is set to 100 columns, not touching the commandlines in
GitHub workflows (at least for now).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all brackets errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(brackets)'
Default config is to have no spaces inside brackets, changed few
documentation strings as well that refered to lists even though the
linter does not care about those.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all thruthy errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(truthy)'
This only accepts true/false for boolean properties. Seems like python
takes all sort of formats:
https://github.com/yaml/pyyaml/blob/master/lib/yaml/constructor.py#L224-L235
But the current specs only mention "true" or "false"
https://yaml.org/spec/1.2.2/#10212-boolean
Which is the standard yamllint config.
Excluding codeconv and workflow files, as some are using yes/no instead
in the respective documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Implemented a sample that shows configuration and basic usage of monitor
mode debugging feature.
Signed-off-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
Update one of the threads in the icmsg_me sample to use ipc_service
nocopy functions in both host and remote applications.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
This commit enables the initiator or the follower
role for the ICMSG multi-endpoint backend
depending on dts by default.
It is needed when BT_RPMSG transport for HCI is used.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
This moves the UDP and Bluetooth initialisation for MCUmgr to be
performed automatically with the new hander registration feature.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This replaces the requirement for applications to manually
register MCUmgr handlers by having an iterable section which
then automatically registers the handlers at boot time.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
There is already CONFIG_SETTINGS_FILE_PATH, which is set to full file path,
while CONFIG_SETTINGS_FILE_DIR is required to be set to its parent
directory. This is redundant, as parent directory path can be easily found
out either during runtime or optionally during buildtime by CMake.
CONFIG_SETTINGS_FILE_DIR was actually introduced recently after Zephyr 3.2
release as a replacement of deprecated CONFIG_SETTINGS_FS_DIR. This means,
that there is no need to deprecate it for 3.3 release and dropping it
should be fine. Adjust 3.3 release notes accordingly, so that
CONFIG_SETTINGS_FILE_PATH will be used directly.
This patch stops using deprecated CONFIG_SETTINGS_FS_DIR. There is actually
no value in respecting it, as setting anything other than parent directory
of CONFIG_SETTINGS_FS_FILE makes no sense.
There is actually one use of CONFIG_SETTINGS_FILE_DIR in file backend
tests, to derive directory for files containing tested settings.
CONFIG_SETTINGS_FILE_PATH is not used there, so it makes little sense to
derive directory name from it. Instead, just use hardcoded "/settings"
subdirectory, as this was the default value of CONFIG_SETTINGS_FILE_DIR.
Deriving parent directory can be done either in runtime or in
buildtime (e.g. using some helper CMake function). Doing it in runtime
however allows to create directory recursively (which this patch actually
implements), e.g. for some more nested FS tree structure. Additionally it
will simplify migration of settings configuration from Kconfig to
device-tree (yet to be developed feature).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Applying same fix as for watchdog relmated samples
in https://github.com/zephyrproject-rtos/zephyr/pull/52949/
Switching to the immediate logging mode, not by just disabling the
LOG_PRINTK option.Do not direct printk to logging subsystem in the sample.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Starting with commit b9b43a0eb772a464bba13833d11e3a31fbf4e09e, printk()
messages are handled by the logging subsystem. This can cause trouble
in watchdog related samples if the deferred logging mode is used (and
currently it is by default), because those samples are ended by a reset
and some messages may not get a chance to be outputted.
Since the same problem concerns also the ordinary logging messages that
may be produced during execution of the samples, this commit fixes it
by switching to the immediate logging mode, not by just disabling the
LOG_PRINTK option.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable the openamp sample for RT1160EVK. CM4 core has a custom DTS
overlay to use LPUART2 for console information, and use a secondary GPT
timer for the system tick.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable the openamp sample for RT1170EVK. CM4 core has a custom DTS
overlay to use LPUART2 for console information, and use a secondary GPT
timer for the system tick.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for setting the help description for each entry in a dictionary
command. Currently the syntax string alone may not provide sufficient
description of its entry. This commit also helps keep the help messages
consistent with existing style.
Signed-off-by: Xinyang Tan <xinyang.tan@delve.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Generates XML file containing VIF policies by reading the device tree
using EDT.pickle generated during build
This script writes a subset of general and sink-pdo VIF policies in
output file
This script gets invoked during build if enabled through kconfig
The generated XML containing USB-C VIF policies could be used by
USB PD/Type-C analysers/testers to understand USB-C properties and
perform tests accordingly
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
This seems to have caused build failures in spite of CI being
green in PR 52653.
This reverts commit fc92eb1b37.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently there is inconsistency in repository file names, APIs, Kconfig
options and documentation around file / file-system backend for settings
storage, as both "file" and "FS (file system)" are used. As an example,
there is `CONFIG_SETTINGS_FS` Kconfig option, but the file that implements
this settings backend is called `settings_file.c`. Another example are
names of static functions that implement settings storage API:
`settings_file_load()`, `settings_file_save()` and
`settings_fs_storage_get()`.
This backend is actually storing all settings in a single file, so it makes
sense to use "File" as the name of backend, instead of a more general
"FS" (which would make sense if several files would be used to store
settings).
Fix inconsistency in used wording in the tree and unify it to "settings
file backend". This naming is more precise to how the implementation looks.
It will also make it easier to grep through the codebase and analyze
existing code.
Deprecate settings_mount_fs_backend() function and all Kconfig options
starting with `CONFIG_SETTINGS_FS`.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Remove Kconfig file samples/subsys/usb/usb_pid.Kconfig added in
the commit e5cbe6a9e7 ("usb: cdc: Add unique PIDs for each sample")
with the motivation to have a separate ID for each sample supposedly
to be recognizable by the host.
The new USB support does not use the options, VID/PID is set
directly in the application. As a note, it is not necessary to have
unique PID for each sample, especially for the well known USB classes.
Replace the individual Kconfig options in the documentation
by a table with the references to the samples and PIDs.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
