Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some minor housekeeping prior to adding an http server
implementation. There are already a number of http headers
and that number will likely increase with subsequent work.
Moving them into a common directory cleans up the
`include/net` directory a bit.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
So far LOG_DBG() was used inside debug hook for mbedTLS library. This meant
that it was hard to distinct log messages by simply looking at the log
level number, even though Zephyr logging subsystem supports colorful logs
depending on log level.
Choose an appropriate Zephyr LOG_*() macro based on log level coming from
mbedTLS library. Remove log level number from formatted log messages, as it
is now redundant.
One controversial thing about this change is that mbedTLS' "2 State change"
log level is mapped to Zephyr's "warning" log level. Those are not really
warnings in real life, but rather informational messages. However, using
"warning" log level for those allows to clearly distinguish between "2
State change" and "3 Informational" debug messages from mbedTLS.
Additionally, mbedTLS debug message implementation does not seem to be safe
to use in production, so keeping in mind MBEDTLS_DEBUG will be enabled just
during debugging phase, printing "2 State change" logs as warnings should
not be a big deal.
Set default MBEDTLS_DEBUG_LEVEL value depending on selected Zephyr logging
module level, so that only single option needs to be configured in
application project.
Remove prompt for MBEDTLS_DEBUG_LEVEL, so that interactively (e.g. via
menuconfig) adjusting MBEDTLS_LOG_LEVEL will always result in automatically
updating MBEDTLS_DEBUG_LEVEL option. This is to prevent so called "stuck
symbol syndrome".
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove v1 implementation from log_core and all references in the tree.
Remove modules used by v1: log_list and log_msg.
Remove Kconfig v1 specific options.
Remove Kconfig flags used for distinction between v1 and v2.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This dependency it is not required since majoprity of platforms are
working with new pinctrl API. This drops the pinmux dependency.
Fixes#46091
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Changes console blocks in hello_world and magic_wand tflite-micro
samples to Kconfig blocks to match content. Fixes typos in
some networking samples so that code blocks display instead
of being hidden. Fixes path to litex-vexriscv-tflite.resc.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Avoid endless loop in `case MQTT_EVT_PUBLISH`
Fail on any error for mqtt_read_publish_payload_blocking, inc. -EAGAIN.
Fixes zephyrproject-rtos#40965
Signed-off-by: Jeffrey Urban <jeffrey@jeffreyurban.com>
The sample did not specify any tests in its sample.yaml file, causing CI
failures.
Additionally, the sample requires to generate secure key before building
the sample, otherwise the build fails. For the CI needs, specify a dummy
test key, which is only included if the build was triggered by Twister.
For this, specify a USE_DUMMY_KEY variable in the sample.yaml file.
Finally, fix some minor build issues in the sample itself - remove
unused variable, and remove deleted (and also unneeded) mbed TLS header
inclusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
CONFIG_DEBUG_OPTIMIZATIONS should not be enabled by default in
prj.conf for tests or samples. Remove it from a few places that it
is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When a WIFI driver is slow to get interface up the system not connect
to WIFI access point. This add some tries to let driver be proper
initialize to allow accept connection request.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
In Mbed TLS:
commit eccd88871767e2fba5f3a079cfdfcb77c376cf20
Author: Gilles Peskine <Gilles.Peskine@arm.com>
Date: Tue Mar 10 12:19:08 2020 +0100
Rename identifiers containing double-underscore
changes the name of a symbol we use. As part of upgrading to newer
versions of Mbed TLS, change the name of the symbol we use.
A better fix would be to not use this symbol at all, and perhaps define
our own symbol the same way this internal symbol is defined within the
library.
Signed-off-by: David Brown <david.brown@linaro.org>
Remove board code and a few associated samples/tests that explicitly
call pinmux_pin_set() to set a given pin as GPIO. This is handled as
part of gpio_mcux_configure() so we don't need to do it again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The current name Socket TagoIO HTTP Client still refering to directory
samples/net/sockets. Rename to TagoIO IoT Cloud HTTP Sample to reflect
better the application sample intention.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
There are some hardware combinations (board/shields) that report the
error undefined initialization levels used at link phase. Add pinmux
Kconfig at project configuration to fix the issue.
Fixes#30029.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Samples that include floating-point format specifications may need
cbprintf FP support. Make sure it's available.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Introduce TagoIO IoT Cloud HTTP post client example. This explorer
Zephyr network resources to demonstrate an end to end application.
The TagoIO allows that any user can test on a easy way Ethernet, WIFI
and Modem (PPP) with BSD sockets. The example provides overlays to
configure WIFI and Modem.
The application consists an a pseudo temperature sensor that sends
periodically data to TagoIO IoT Cloud platform. The data can be
visualized on a web browser dashboard, cellphone or tablet. The
steps to configure TagoIO are described on the example documentation.
Special Variables:
- CONFIG_TAGOIO_DEVICE_TOKEN DEVID token generated by TagoIO
- CONFIG_TAGOIO_HTTP_WIFI_SSID SSID when using WIFI
- CONFIG_TAGOIO_HTTP_WIFI_PSK PASSWD when using WIFI
- CONFIG_MODEM_GSM_UART_NAME UART label when using MODEM
- CONFIG_MODEM_GSM_APN APN when using MODEM
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Simplify overall scenario using sntp_simple to keep main MQTT logic more
clear. Also, remove related code which was used only by the old SNTP
code, e.g. show_addrinfo().
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
Callback used mqtt_publish_qos1_ack but mqtt_subscribe called with
default 0 value (MQTT_QOS_0_AT_MOST_ONCE)
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Clarify in the docs the importance of generating a key type that matches
the configuration used to sign JWT tokens.
Signed-off-by: David Brown <david.brown@linaro.org>
Add the template config values to the prj.conf. These will need to be
changed according to the instructions in the README.rts.
Signed-off-by: David Brown <david.brown@linaro.org>
The instructions on setting the necessary Kconfig values is unclear.
Add a description based on values that can be found in the Google IoT
Core console.
Signed-off-by: David Brown <david.brown@linaro.org>
