Add support for RT595 evk to adc driver sample. RT595 uses external
reference voltage, which is set to 1.8V on this board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fixup ADC sample support for boards with LPADC present. This ADC only
supports an external reference voltage, which is a board-specific value.
Add reference voltage values for all supported boards.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add ADC driver sample overlays + update features in doc + metadata for TI
CC13x2/CC26x2 based boards (cc1352r_sensortag, cc1352r1_launchxl,
cc26x2r1_launchxl).
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
This change creates an overlay file so that the adc sample
is running on the nucleo_u575zi_q board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The sam0 ADC driver has ADC_CONFIGURABLE_INPUTS enabled, which means
that the device tree ADC nodes must include the zephyr,input-positive
property.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
- Inform about the requirement to configure ADC channels in Devicetree
- Fix sample output example
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Improve include list, so that file is self-contained
- Don't use an array type for the samples buffer, as its length is 1
- Improve some error messages
- Use PRId16/32 for printing fixed-width signed integers
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify sample by relying exclusively on channel data from Devicetree.
This change makes sample simpler and more portable at the same time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is now possible to configure ADC channels in Devicetree. This makes
code more portable, since there is no need to hardcode hardware specific
bits in the C sources.
This patch adds channel/s configuration for all support sample overlays.
Hardcoded values have been used:
- Resolution: 12-bit
- Gain: 1
- Reference: internal
- Acquisition time: default
Some nRF channels have been adjusted to include resolution as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This is a follow-up to commit f5ffd05e6b.
Since twister removes leading spaces from received lines before
further processing, the regular expression for checking the output
produced by the sample cannot contain such space. Also negative
values read from ADC channels need to be allowed.
For consistency, remove the leading space also in the actual string
printed by the sample.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The overlay for the nRF52840 DK board uses ADC controller child nodes
for specifying channel configurations and it shows how to configure
a channel in differential input mode, so it can serve as an example
of how to use these new possibilities. The overlay for the nRF51 DK
board shows how to use a specific ADC resolution (the default 12 bit
setting is not supported by nRF51 SoCs).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Allow specifying configuration of channels through child nodes of ADC
controllers. This way analog inputs can be specified for channels in
SoCs that require this and it is also possible, for example, to use
different gain or reference selections for particular channels.
This commit also removes a few former limitations of the sample: now
it is possible to use more than 2 channels and each channel can use
a different ADC controller. Also the ADC resolution to be used can be
specified through devicetree.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add pinmux settings for lpadc to LPCXpresso55s69 and LPCXpresso55s28
boards. Enable ADC driver sample for LPCXpresso55s69, to aid in testing
pinmux settings.
Fixes#45401
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This update Atmel sam afec driver to use pinctrl driver and API. It
updates all boards with new pinctrl groups format. In addition, it
add overlay files to allow run samples/drivers/adc example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a basic device tree overlay to support the use of the ATSAMD21 XPro
dev board with the ADC sample application.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
All drivers that require input_positive to be set should be given it.
Some parts may require an offset, so abstract this away too.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
ADC support verified with driver sample. LPADC1 channel 0 pin used,
which maps to pin 10 on J9 on the EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enables ADC1 on the RT1020 evaluation board. Channels 10 and 11 of this
ADC are exposed as pins 1 and 2 of J18 on the evk.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enables ADC on RT1015 evaluation board. Channels 1 and 13 are exposed as
pins 2 and 1 of J18 on the EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Added ADC support to RT1010 evaluation board. ADC channels 1 and 2 are
exposed as pins 10 and 12 of J26.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds ADC support to RT1024 EVK. ADC channels 10 and 11 are enabled as
pins 2 and 4 on J18 of the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enables the ADC on the RT1060 evaluation board. Channels 0 and 15 of
ADC1 are available on pins 1 and 0 of J23, respectively.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
add adc to board dts file,
update yaml files and documentation,
add adc 1 channel pins 1 and 15 to the pinmux file,
add overlay file to the board adc sample,
add board to the adc test file and
Signed-off-by: Andrei Auchynnikau <ovchinnikov@strim-tech.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
reuse the lpc's lpadc driver for rt1170, modify the dts and add
some macro to shield some code of LPC series. Also add the
board support inside the tests/drivers/adc/adc_api/src/test_adc.c,
and a dts node:zephyr,user inside
samples/drivers/adc/boards/mimxrt1170_evk_cm7.overlay
Signed-off-by: Crist Xu <crist.xu@nxp.com>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in nucleo_l552ze_q platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
This commit configures ADC sample application using overlay. The ADC
sample has been tested in stm32l562e_dk platform.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
Add some changes to adc sample to enable valid verdict generation
using twister:
-Replace 'single_line' keyword with correct 'one_line'
-Remove parenthesis from the sample output to enable regex verdict
-Add timeout to save time in execution
Additionally, add support for disco_l475_iot1.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
