Disables having USB enabled for boards that configure USB CDC for
console, shell or logging at bootup in applications that enable USB
to prevent a conflict arising whereby USB is registered from
multiple points and later calls fail.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add a sample to put the part into Deep power down mode by
setting the state to PM_STATE_SOFT_OFF.
Wakup the part using an RTC alarm.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fix all hyphens errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(hyphens)'
Default config is only one space after the hyphen.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all thruthy errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(truthy)'
This only accepts true/false for boolean properties. Seems like python
takes all sort of formats:
https://github.com/yaml/pyyaml/blob/master/lib/yaml/constructor.py#L224-L235
But the current specs only mention "true" or "false"
https://yaml.org/spec/1.2.2/#10212-boolean
Which is the standard yamllint config.
Excluding codeconv and workflow files, as some are using yes/no instead
in the respective documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
CONFIG_SOC_MEC1501_TEST_CLK_OUT is removed from mec15xx SOC,
hence remove this configuration in mec15xxevb power management
sample and add board overlay with right configurations.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
This replaces the requirement for applications to manually
register MCUmgr handlers by having an iterable section which
then automatically registers the handlers at boot time.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Allow enabling CDC ACM logging only if CDC ACM is not used as logging
backend. This prevents endless recursive logging loop, especially
visible when minimal footprint logging is enabled.
Fixes: #52981
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add deep sleep sample code with support for the
following wake-up sources:
- Timer
- EXT0/EXT1: IO under RTC domain
- GPIO (ESP32-C3 only)
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A simple sample with some (explained) tricks to get code relocation for
Intel ADSP CAVS platforms.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Now that IPM drivers are enabled based on devicetree we can
remove any cases of them getting enabled by Kconfig, *defconfig*,
and *.conf files.
We need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Remove inclusion of moved and non needed header.
Other unneeded headers have been also removed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
First pads are being configured for use by the FPGA.
Then CPU loads usbserial bitstream.
Finally it reenables clocks, sets up USB PID and waits for device to
enumerate.
Also disable software resets in used clocks.
Signed-off-by: Michal Sieron <msieron@antmicro.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A sample project for ESP32 Ethernet testing.
Possibly this should be consolidated into existing networking samples
Signed-off-by: Grant Ramsay <grant.ramsay@hotmail.com>
Use inline literals where applicable -- especially for the words that
contain `@`; otherwise, Sphinx will think it is an email address.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This overlay shows the LPUART at 9600 with wakeUp capability
to exit the nucleo_wl55jc target plaform from the low Power
stop mode, EXTI_Line 28 is the corresponding wakeUp source.
The LPUART is sourced by the LSE (32768Hz) and max baudrate
is 9600. Set the console to 9600.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
`samples/net/wifi` replaces custom esp32 wifi sample
code. Then it can be removed from main repository.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This PR adds a `*_cli_*` infix to the Config Client API to match
the changes in Health Client. The old API is marked as deprecated.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
On STM32 PM serial wakeup sample, a power efficient configuration using
lpuart is provided for stm32l562e_dk target.
Though, since default configuration of the board is using ST-Link virtual
port com on uart1, which can't be changed in CI and hence can't be tested,
then remove this target from sample yaml configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Now that Wifi drivers are enabled based on devicetree we can
remove any cases of them getting enabled by *.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Since the change in the PR #49167
samples: boards: stm32: serial_wakeup: fix device usage issues
the sample should not check the "Device ready" anymore
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit retrains the power management testcase
tests/samples/boards/stm32/power_mgmt/serial_wakeup
to bun on stm32 boards only.
Limiting first to nucleo_wg55 and stm32l562dk targets,
more to be added.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Toward deprecated DT_LABEL() macro, replace the handful of cases
that use DT_LABEL(node) with DT_PROP(node, label).
Signed-off-by: Kumar Gala <galak@kernel.org>
Some platforms have the possibility to cancel the powering off until the
very latest moment (for example if an IRQ is received). Deal with this
kind of failures.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Setting CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT here is unnecessary
as the value needed is equal to the default.
Signed-off-by: Adam Zelik <adam.zelik@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Device ready check was wrong (< 0 ?!), so fix it. Also drop static
qualifier for the device variable (not needed) and initialize at
definition time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The test case "samples/boards/mec15xxevb_assy6853/power_management" could
always pass until commit 5f60164 was merged in. This patch changes the sem
take timeout value from 50ms to forever of the log thread, it will make the
idle thread run longer and takes more stack memory. Analyzed the coredump
of the failed test case, it can be found that the test case stucks at
z_idle_stacks. The test case used default CONFIG_IDLE_STACK_SIZE = 256 in
kernel/Kconfig, now we increase the value to 512 in prj.conf for this test
only. With this change, the test case can pass with the commit of 5f60164.
Fixes#47987
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
Names of some testcases are duplicated in another files.
This change rename duplicated testcases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Now that audio drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add a sample to demonstrate use of (LP)U(S)ART with wakeup capability
This sample is provided with 2 configurations
- nucleo_wb55rg: Basic configuration that could be exercised in CI
- stm32l562e_dk: "Full feature" configuration that require some set up
configuration (be able to display console from lpuart) and allows to
achieve lowest power consumption.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Having the LED device enabled in devicetree will now get the driver
enabled by default when CONFIG_LED=y is set. So we can remove
setting driver enabling Kconfig values in various .conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Have the display enabled in devicetree will now get the driver
enabled by default when CONFIG_DISPLAY=y is set. So we can remove
setting driver enabling Kconfig values in various .conf and
defconfig files.
Signed-off-by: Kumar Gala <galak@kernel.org>
