Fixes: #73831
find_package(Zephyr) should be called before first project() call.
Zephyr package will test and force-set the correct toolchain, especially
the C compiler.
The project() will also set the C compiler, if not set already.
If project() is called first, then conflict arises on the C compiler
selection and thus the following message is seen:
> You have changed variables that require your cache to be deleted.
> Configure will be re-run and you may have to reset some variables.
> The following variables have changed:
> CMAKE_C_COMPILER= /usr/bin/gcc
This cache deletion results in other errors, such as a missing BOARD
setting.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
If central initiates incompatible procedure after having replied (with
_IND), peripheral fails to disconnect as spec'ed.
Fix by correctly setting the INCOMPAT flag to reserved on IND receipt to
enforce the disconnect.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Resume the TX Data Q when a LL_UNKNOWN_RSP is recieved instead of a
LL_PHY_RSP.
Update PHY Update unit test with more coverage of the TX Data Q pause
state.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In ull_llcp* some functions used in unittesting did not have
the llcp_ prefix
Although this is not a big issue since they are only used when
testing the module this commit adds the prefix so that we
have a more consistent naming
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Update unittests for the following areas/controll procedures
- API
- collision handling
- invalid PDUs
- unsupported procedures
- buffer allocation
- TX queue
- Data Length Update
- PHY update
- Encryption
- Ping
- Version
- Channel map update
- Min. used channels
- Connection update
- SCA
- Terminate connection
- CTE request
- CIS create
- CIS terminate
Also moved the internal API tests from the ull_llcp* files
to the proper unittest C-file
Unused files are removed
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Make Data, ISO, BIS and CIS PDU structure's octet 3 vendor
specific.
This will allow vendors not supporting the octet 3 or
CTEInfo (8 bits) to save 1 octet in their PDU structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Re. peripheral phy update procedure: UNKNOWN_RSP from central was not
handled, leading to stall of procedure and subsequent procedure timeout
Proper handle and unit test for case added.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Remove boilerplate code:
> if (NOT BOARD STREQUAL unit_testing)
> message(FATAL_ERROR "This project can only be used with...")
> endif()
as that is now handled by boards.cmake when validating the board.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The test_phy_update_central_rem_collision didn't have processing
of an "at-instant" connection event. Thas causes the remote requesed
PHY update to hand in waiting for instant on air state and whole
test to fail.
To fix the problem, proper processing of "at-instant" connection evnet
has to be added. In consequence the local PHY update procedure, that
as waiting for end of the remote procedure is delayed by one connection
event.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix the deprecated calls to loading ZephyrUnittest by replacing them
with `Zephyr COMPONENTS unittest`.
Signed-off-by: Yuval Peress <peress@google.com>
The pausing and timing of data transmission is changed in the PHY update
procedure, so that conformance tests passes. This requires an update
in unittests as well
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Only apply change to effective DLE times if current max times are too
small to accommodate. Similar to legacy implementation
Update unit tests to new DLE ntf behavior
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There were no unit tests that verify if instant value send in
LL_PHY_UPDATE_IND PDU are correct. The commit adds missing tests.
Besides that there is a small update to all ull_cp_phy_update calls,
to improve readability of the code. Magic number was changed to
HOST_INITIATED macro.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
When a running procedure receives a REJECT or UNKNOWN_RSP PDU that is
not an expected part of the procedure flow this leads to termination
of the connection
This affects procedures:
CU/CPR, CTE, PHY, PING, DLE, FEX, VEX, CHMU
Unit tests are updated to cover the updated behaviour.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The PHY update procedure may trigger a DLE update in certain
situations
When a limited number of rx buffers is available there may not be
enough for doing the phy update and dle update notifications
at once.
Fixes#41788
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Add a separate procedure context pool for remote initiated procedures.
Make it configurable in size by BT_CTLR_LLCP_REMOTE_PROC_CTX_BUF_NUM.
Fix all unit tests referring to the amount of free context buffers.
Fixes#41823
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
The minimum CMake version required is 3.20.0, but the unittests
for the LLCP controller still referred to 3.13.1 as the minimum
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
The abbreviations cen and per may be confusing, so they are
expanded into central and peripheral
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
There were some references to slave and master left in the unittests
for the refactored LLCP.
These are changed in respectively peripheral and central
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
There were changes done to controller code that cause
tests to do not build and fail during execution.
Changes are related with:
- modified code related with extended advertising ADI
field handling
- added generic double buffer data structure that is
used in controller
- moved code that was building only when DF is enabled
- added EVENTS_PHYEND that is not available in nrfbsim
board
The PR addresses those issues.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Pushes all work done in the topic-ble-llcp branch into main branch
This is a refactoring of the LL control procedures; the refactored
control procedures are hidden behind a KConfig option and
per default disabled
Goal of the refactoring:
close issue Link Layer Control Procedure overhaul #15256
make it easier to add/update control procedures
Refactoring consists in principal of writing explicit state machines
for the control procedures.
To reduce the risk of regression errors unit-tests have been added
Following control procedures are implemented:
Connection update procedure
Channel map update procedure
Encryption procedure
Feature exchange procedure
Version exchange procedure
ACL termination procedure
Connection parameters request procedure
LE Ping procedure
Data Length Update procedure
PHY update procedure
Min. nr. Of channels used procedure
Constant Tone extension request procedure
This is a joined work by the people listed in the signed-off-by
list (in alphabetical order)
Signed-off-by: Andries Kruithof Andries.Kruithof@nordicsemi.no
Signed-off-by: Erik Brockhoff erbr@oticon.com
Signed-off-by: Piotr Pryga piotr.pryga@nordicsemi.no
Signed-off-by: Szymon Janc szymon.janc@codecoup.pl
Signed-off-by: Thomas Ebert Hansen thoh@oticon.com
Signed-off-by: Tommie Skriver tosk@demant.com
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
