Turn the MBEDTLS_RSA_FULL selects into depends on.
This is how the other MBEDTLS_KEY_EXCHANGE_* Kconfig options are defined.
This is done to avoid circular dependencies.
At the same time update uses of the affected MBEDTLS_KEY_EXCHANGE_*
Kconfig options to enable/disable the dependencies which used to be
automatically handled.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The original Wi-Fi certificates are from WFA. Now replace them with
certificates that generated by myself. These certificates use
sha384WithRSAEncryption signature algorithm, and use 3072 bit RSA
public-key.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Some OpenThread logs were moved from L2 to the OpenThread module,
so enable logging from there to keep previous logging visibility.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Enable MQTT 5.0 support in the mqtt_publisher sample and make use
of the topic aliasing feature.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The error code `0x80` is replaced with its
corresponding `mqtt_suback_return_code` enum
value. This will make the code more readable, as
users of this example do not have to look up, what
`0x80` encodes.
Signed-off-by: Pályi Lőrinc <palyilorinc33@gmail.com>
Enable DHCPv4 when network interface goes up. This makes it easier
to test IP connectivity with DSA.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Current DSA TX/RX way was hard-coded in ethernet devices driver
with ETH_DSA_SUPPORT and NET_DSA.
This patch is to make such way obsolete, as we actually will support
a better DSA framework to handle this in NET/DSA core driver.
To make legacy devices not affected, below options are used instead.
- ETH_DSA_SUPPORT_DEPRECATED
- NET_DSA_DEPRECATED
Once the legacy devices are converted to new DSA framework, this code
could be removed.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Enable `NET_ZPERF_SERVER` for samples that currently enable `NET_ZPERF`
to prevent feature regressions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Commit e33d9ee4 incorrectly stated that:
> Now that nRF70 by default uses zero-copy fine-tune the configuration
to get optimal memory while getting peak throughputs.
This is incorrect since `NRF_WIFI_ZERO_COPY_TX` is only enabled by
default for the nRF54L series. Update the data heap size so that the
smaller value is only used when `NRF_WIFI_ZERO_COPY_TX` is enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update iperf version information for use with zperf. Note the fallback
kconfig option for versions older than `2.0.10`, and remove the warning
about `LAST PACKET NOT RECEIVED!!!` since it is not longer present with
the fixed UDP header.
Signed-off-by: Jordan Yates <jordan@embeint.com>
As the sample uses VLAN which needs Ethernet support make sure
CONFIG_NET_L2_ETHERNET is set in prj.conf file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
RSA3K based certs are not supported on all platforms, so, keep both
variants, rsa2k (the older certs but with longer expiry 9999 days) and
rsa3k (latest ones) and we can have more variants in this folders.
Also, add a cmake variable to override the path with default as rsa3k.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Instead of having an overlay move the Enterprise configurations to a
dedicated snippet so that it can be enabled with any sample.
Can be used along with Wi-Fi snippet e.g., `-S
"wifi-ipv4;wifi-enterprise"`.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Keep the minimum configurations in frdm_rw612.conf and rd_rw612_bga.conf
for basic STA functionality of embedded supplicant case.
Add the superset configurations in nxp/overlay_rw612.conf.
Add the supplicant support in nxp/overlay_hostap_rw612.conf.
Add the basic debug support in nxp/overlay_rw612_debug.conf.
Add the supplicant debug support in nxp/overlay_hostap_rw612_debug.conf.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Move the common tunnel setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Now that nRF70 by default uses zero-copy fine-tune the configuration to
get optimal memory while getting peak throughputs.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Enable wifi node in all procpu dts, so Wi-Fi could be enabled simply by
enabling the CONFIG_WIFI. In turn some sample code overlay files can be
dismissed.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
It is easier to separate a sample application Kconfig
values from ones that configure something inside Zephyr.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add support for running LwM2M client on nRF52840 chip
using nRF9160 as a modem through serial port.
nRF9160 should run Serial LTE Modem application build
from nRF Connect SDK.
nRF9160DK board has two MCU, nRF9160 and nRF52840.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
OVERLAY_CONFIG has been deprecated and replaced by
EXTRA_CONF_FILE. Update samples to reflect that.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for DICONNECT message specified in MQTT 5.0.
As with MQTT 5.0, the disconnect can now also be initiated by the
broker, it was needed to add decoder support for the message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow configuring MTU for CMUX.
Some AT manual and specification define this as a
frame size. Linux ldattach default to 127 bytes,
3GPP TS 27.010 defaults to 31.
We should limit our CMUX frames to a size that
remote end is capable of handling.
Linux silently drops oversized frames.
Also, remove MODEM_CELLULAR_CMUX_MAX_FRAME_SIZE as
this was only limiting a buffer sizes, and resulted
CMUX frames to be capped to same value.
Use MODEM_CMUX_WORK_BUFFER_SIZE and MODEM_CMUX_MTU instead.
Also rename CONFIG_MODEM_CELLULAR_CHAT_BUFFER_SIZES to
CONFIG_MODEM_CELLULAR_CHAT_BUFFER_SIZE as it is now
only used as a Chat module. DLCI pipes use
CONFIG_MODEM_CMUX_WORK_BUFFER_SIZE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add ULP Coprocessor board support for C6.
This requires a change in the board qualifier depending on the build
target.
Update esp32c6 overlay and configuration files to the proper name.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
TLS_CREDENTIAL_SERVER_CERTIFICATE credential type is misleading, as in
fact it just represents a public certificate, it does not matter if the
certificate belongs to a server or a client. And actually, it was
already used in-tree for clients as well, for example in LwM2M.
Therefore rename the credential type to a more generic
TLS_CREDENTIAL_PUBLIC_CERTIFICATE and deprecate the old one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
nRF70 driver now uses a separate heap, so, no need to explicitly
configure the kernel heap.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the common VLAN setup code to samples/net/common directory
so that other network samples can utilize that too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add `overlay-dhcpv4.conf` for using this sample with DHCPv4.
When the DHCPv4 client is enabled, we must have a large number
for `CONFIG_ZVFS_EVENTFD_MAX`.
This sample may be frequently used with the DHCPv4 client,
so we'll add the extra config file.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
