Ring buffer section now resides under "other" topic, since the
ring buffer type is a general purpose type (like the singly and
doubly linked list types), rather than a kernel-specific type.
Enhances ring buffer section to improve content and improve
consistency with the form used elsewhere in the Kernel Primer.
Also corrects a minor error in the ring buffer API documentation.
Change-Id: Icaa8661524f80e31f173adee859844cadb38967f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Ensures that all APIs which accept a timeout value wait for at least
the specified amount of time, and do not time out prematurely.
* The kernel now waits for the next system clock tick to occur before
the timeout interval is considered to have started. (That is, the only
way to ensure a delay of N tick intervals is to wait for N+1 ticks
to occur.)
* Gets rid of ticks -> milliseconds -> ticks conversion in task_sleep()
and fiber_sleep() legacy APIs, since this introduces rounding that
-- coupled with the previous change -- can alter the number of ticks
being requested during the sleep operation.
* Corrects work queue API that was incorrectly shown to use a delay
measured in ticks, rather than milliseconds.
Change-Id: I8b04467237b24fb0364c8f344d872457418c18da
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
For XIP images, in order to avoid the situation when
__data_rom_start is 32-bit aligned, but the actual data is placed
after rodata section, which may not end exactly at 32-bit border,
pad rodata section, so __data_rom_start points at data and it is
32-bit aligned.
On non-XIP images this may enlarge image size up to 3 bytes.
This is generally not an issue, since modern ROM and FLASH
memory is usually 4k aligned.
Change-Id: I3d37fccbc610615585d776144ab9e281368258d6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This adds convenient helper so that users don't need to touch nano_sem
internals. Wrapper for unified kernel is added too.
Change-Id: Ic0af8b1ea302939d5239648327cb3cc125c48148
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Provides users with a more compact and intuitive API for kernel
timers.
Provides legacy support for microkernel timers and nanokernel
timers by building on the new kernel timer infrastructure.
Each timer type requires only a small amount of additional
wrapper code, as well as the addition of a single pointer
field to the underlying timer structure, all of which will be
easily removed when support for the legacy APIs is discontinued.
Change-Id: I282dfaf1ed08681703baabf21e4dbc3516ee7463
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_MSGQ_DEFINE() for buffer alignment
- Renames parameters where necessary so they are more intuitive
Change-Id: I0b53105c04109127897bf4790e6908082f82da4e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Finally, after numerous, preparation patches... Make a device drivers
config_info structure 'const'.
Change-Id: Idc4682705da18a18b694d3fb21ba6006f96ac87b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
- Renames to K_MEM_POOL_DEFINE() for consistency
- Adds alignment parameter to align the pool buffer.
Jira: ZEP-926
Change-Id: I6cf0a1ce45c3a0fc5f0675047d8928659df1e75e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
K_THREAD_DEFINE() can no longer specify a thread group. However, it now
accepts a 'delay' parameter just as k_thread_spawn() does.
To create a statically defined thread that may belong to one or more thread
groups the new internal _MDEF_THREAD_DEFINE() macro is used. It is only used
for legacy purposes.
Threads can not both have a delayed start AND belong to a thread group.
Jira: ZEP-916
Change-Id: Ia6e59ddcb4fc68f1f60f9c6b0f4f227f161ad1bb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The keys BT_STORAGE_SLAVE_LTK, BT_STORAGE_LTK, BT_STORAGE_IRK allow to store
the distributed bonding keys for ble legacy pairing.
Change-Id: Iaee8b78456e9865a53a2f1228b6afa7ff44bc4db
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Added a OpCode definition that can be used to change the Page
timeout value.
Change-Id: I6ec06f6114f75665b161206ef3ebabbab193b04f
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
The list of remote devices for which we have information stored can be
retrieved using this key.
Change-Id: I1476c40177b631d6b2b4049623052245b25ed1b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_storage_clear() function doesn't modify the data behind the
addr parameter, so the pointer should be decared const.
Change-Id: Icce676f9df80bac26ba4877bb63752559a43339f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
__ASSERT() would trigger if the two buffers were on a common boundary.
Change-Id: Ie9af12abc407dd43615f543b43397493d981057e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Tweak mailbox API parameters so that not only are their descriptions
correct, but their names match across header file and C file.
Change-Id: Ieeb3a40fb7c535a5eac2e06533d01d13aaf69181
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine k_pipe_block_put() is only available if the system has
been configured for asynchronous pipe sends.
Change-Id: I642fecc961ca4ef4ac8839a01ffd4125c30794b8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Reorders parameters where necessary
- Adds alignment parameter to K_PIPE_DEFINE()
- Renames parameters where necessary so they are sync'd
between header and source files
Change-Id: I4f2367abc28aff646cc90beb9f08bb266e143b0c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Two functions are proposed:
- sys_memcpy_swap(): will memcpy and swap the 2 given buffers
- sys_mem_swap(): will swap the buffer in place.
The idea is to propose 2 different functions optimized for 2 different
usage.
Change-Id: I1c23907c1f287b72d9be077ccf3aadbb8d379e71
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reverts commit 627feb92d4.
This patch breaks TCP/IPv4 support in echo_server.
Change-Id: Ia1e2cf8dfa94f845d3a8282c83bba40b36ee782c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Gets rid of official support for dynamic timer allocation
in the unified kernel, since users can easily define and
initialize timers at any time. Legacy support for dynamic
timers is maintained for backwards compatibility reasons
for the time being ...
Change-Id: I12b3e25914fe11e3886065bee4e96fb96f59b299
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Folds this API into k_stack_init() to provide a single API
that requires the caller to pass in the stack buffer, just
as is done for other kernel objects initialization APIs
involving the use of a buffer.
Change-Id: Icad5fd6e5387d634738d1574f8dfbc5421cd642d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
* Gets rid of k_current_priority_get(). Users can just call
k_thread_priority_get(k_current_get()) instead.
* Declares k_thread_priority_get() in kernel.h, where it
really belongs.
* Removes duplicate declaration of k_thread_priority_set().
Change-Id: I616ae6f2e06c95ecba3b92324186b3fa29162fd1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of unified kernel APIs that will never be implemented.
(i.e. They were proposed, but are no longer considered desirable.)
Change-Id: I63ff0d2cdef355d21595f2a778ef5d5b18796149
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Allows unified kernel to support legacy microkernel applications
that use private tasks.
Also renames the unified kernel macro for defining a thread
to be consistent with the naming used for defining other kernel
objects.
Change-Id: I667d87056138c45c291dd848344e4051bf9fd1ff
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These can be re-introduced if a kernel workload measuring
capability is added to the unified kernel.
Change-Id: Id7ad9c1239667511ffcecf571126301c9b278929
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds type cast to convert task group argument to a numeric value,
in case the caller passes in "NULL" (as Kernel Primer says to do
when the task isn't a member of any task group).
Change-Id: I549f86aba0f340c2fb256c4fceeaf786fb8eb5fc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Timers are based off timeouts now, which can only be enabled when the
system clock is enabled. So the three are really just one setting now.
Keep the NANO_TIMERS and NANO_TIMEOUTS around for now until all
middleware that rely on them is updated. They are always enabled when
SYS_CLOCK_EXISTS is enabled.
Change-Id: Iaef1302ef9ad8fc5640542ab6d7304d67aafcfdc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename remaining functions to fit with kernel naming convention for
internal interfaces. Use struct k_thread instead of struct tcs.
Change-Id: I28cd7f6f4d7ddaeb825c8d2999242d8d2dd93f31
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Can speed up some kernel code paths that know a list is not empty.
Change-Id: Ic1261b2e9bf242b7fe49e8a36aeacf9e03f3026b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
