Add a new sample application in sample/bluetooth/hci-uart
that acts as a bridge between a UART and the BLE Controller.
It receives commands and ACL data in H4 format over the UART
and passes them on to the BLE Controller to be processed.
It also conversely forwards all events and incoming ACL data
generated by the BLE Controller to the UART.
The application uses the hci_raw interface to pipe the data
to and from the BLE Controller and UART.
Change-Id: Iff7696166a82fe363b2ad4e1abea40103899f927
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be reverted once input is supported in QEMU.
Change-Id: I4bc946f1634bf9ebd17b697f0da7ce2f813e5725
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
These platforms don't have the hardware and will always fail.
Change-Id: I637d39f003bd1d507da0b5bb6fa12118040fcd63
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Got out of sync with the revised signature of k_stack_init().
Change-Id: Ib4c67c75f30055583a457bfb13f8dacc9929ee88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Old markup was using %(target)s, which is not the right markup to use,
so it was faiing to build.
Change-Id: Idbe99cfdd695284dc2a66e5823bc65a1417fbfd3
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Implement resources so they conform to what the ETSI plugtest suite
expects.
This allows the zoap-server sample to pass most of the tests of the
CORE[1] group, only TD_COAP_CORE_09 is not implemented.
Tests involving lossy networks weren't run as well.
The tests were run against the libcoap[2] client.
[1] ETSI CoAP test description
http://www.etsi.org/plugtests/CoAP/Document/CoAP_TestDescriptions_v015.pdf
[2] libcoap
https://libcoap.net/
Change-Id: Ifa3ed21a93052e02f47e99d7cb6d9d4b28e576d8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This sample uses the grove temperature and humidity sensor and displays the
read values on the grove LCD.
Change-Id: Id6fb6171c26c97f1b01008fa06a4dc85287d7545
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the sample fails, it's difficult to identify whether it failed
during the configuration or transfer stage. Provide a little more
information which will allude to the nature of the failure.
Change-Id: I5272ce73f56b0e51c8439d5510e512b616665705
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This removes ipss_listen since it does depend on the old network stack it
cause build problems with yaip and anyway its code is only used by ipsp
sample while the net samples does not use ipss_listen at all.
Change-Id: I23987670548741bde8800115d473a3bab242153b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares the way for more controller-side HCI implementations
which can be named hci-<transport>.
Change-Id: I6f82db4b7b7096a122f32def9fe9025a7b811244
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Gets rid of k_current_priority_get(). Users can just call
k_thread_priority_get(k_current_get()) instead.
* Declares k_thread_priority_get() in kernel.h, where it
really belongs.
* Removes duplicate declaration of k_thread_priority_set().
Change-Id: I616ae6f2e06c95ecba3b92324186b3fa29162fd1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Using AON for GPIO kconfigs is very specifc to quark se, there
is no need to make this special for this platform. Use the
existing scheme instead.
Change-Id: I946431490380dc0f537d6056277a94c9c9c80fed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Simplified some documentation, removing inconsistencies and making
it easier to understand by separating PM infrastructure areas and
soc specific components that implement the hooks.
Removed the DEVICE_SUSPEND_ONLY policy as it is redundant and
causes high complexity in the flow. It is also not practical
to use it because it was meant to be used without doing CPU or SOC
low power state operations. This means it would do device PM
operations in the ISR of the system timer used by the scheduler.
This can disrupt the scheduler time.
Added a check of a flag around the notification sent from the ISR
of the wake event and created APIs to set/clear it. This will
allow disabling the notification when not needed from
_sys_soc_suspend().
Jira: ZEP-972
Change-Id: Id7aa7d2683384eabed518d4efac446ecc84c3498
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The path and port used by zoap-client were different than the ones used
by zoap-server.
Even if they are different applications, for consistency, it makes sense
for them both to be able to talk to each other.
Change-Id: I883d59c77bc3800b4f0965ba7bcf96a08e545d29
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
uIP keeps the port separated from the IP addresses, so if the
application wants to communicate with a remote endpoint we must also
have the port information available.
Change-Id: I8e2b01fe5717166e1f9cebcc74b2056325b8ccc3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Origin: Original
Change-Id: I0927c25fbbba5d4863f199d058d311c10d52d784
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The demo can be configured to use different object types for its
synchronization: SEMAPHORES, MUTEXES, STACKS, FIFOS and LIFOS. To
configure a specific object, set the value of FORKS to one of these.
By default, the demo uses MUTEXES.
The demo can also be configured to work with static objects or dynamic
objects. The behaviour will change depending if STATIC_OBJS is set to 0
or 1.
By default, the demo uses dynamic objects.
The demo can be configured to work with threads of the same priority or
not. If using different priorities, two threads will be cooperative
threads, and the other four will be preemtible threads; if using one
priority, there will be six preemtible threads of priority 0. This is
changed via SAME_PRIO.
By default, the demo uses different priorities.
The number of threads is set via NUM_PHIL. The demo has only been tested
with six threads. In theory it should work with less than six threads,
but not with more without making changes to the forks[] array in the
phil_obj_abstract.h header file.
Change-Id: If7a0a34b216929a661245fd921a32ec413df8a4a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is a nanokernel sample and the MDEF file is not being used at
all.
Change-Id: I344adfa9394329258144de88521764974238f6a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the power sample and drivers with the new device driver power
management API using the existing logic
Jira: ZEP-954
Change-Id: Idd94232e458767635973e94e9fc673c01612c1e2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
This fixes the UUID 128 bits to use the right byte order so it can be
decoded properly:
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
Length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295)
Change-Id: Ia4aacaf3557d74a248f63cbffb2adb73b076d38c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Excluded Quark D2000 because there is not enough RAM to
build the sample.
Change-Id: Icc772e0aaca2be8731eae8f986eed17782beb445
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
In many cases there is no need to define a macro for printing to
the console, just use the correct variant directly.
Jira: ZEP-240
Change-Id: I9952deda4bfc60424f01fca2443d037562d13d0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
.ini format supports long lines by prefixing the continuation with an
empty line. Adding a backslash makes the backslash part of the value.
Change-Id: I0a1ade3a6bdf12281e61d06e21d7233d4b624b48
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Boards that cannot support microkernel applications for memory resources
are excluded from microkernel build test.
qemu nios2 board is excluded from nanokernel because the Altera JTAG
UART not implemented yet
The kernel even logger buffer size for nanokernel was reduced from 1000
elements to 500 to allow the sample to fit in the Quark D2000 board.
Jira: ZEP-698
Change-Id: I0c5cc4c0bfc27940a758dcdd8ff0e01ad7f4b88c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The sample applications for task profiling requires a default
project configuration file that can be used as reference for
any other board.
Quark SE dev board has some optional optimizations that can
be added using the prj_quark_se_devboard.conf file.
Some redundant symbols were removed to simplify the reading
of the configuration.
Jira: ZEP-698
Change-Id: I71d584d4454392e740f8b7a2c2f47206b76c3abf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
