Move ECM functionality from netusb to function_ecm making defines not
needed in many cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adding status callback allows to control report sending only when i.e.
device is connected or configured.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
patch add a OUT interrupt endpoint descriptor and registers a
corresponding notification callback with usb driver, which is invoked
when data is sent to device from host.
Implement the read ready notification as suggesteed by
Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Zephyr UART drivers offer very low-level functionality. Oftentimes,
it would be useful to provide higher-level wrappers around UART
device which would offer additional functionality. However, UART
driver irq callback routine receives just a pointer to (low-level)
UART device, and it's not possible to get to a wrapper structure
(without introducing expensive external mapping structures). This
is an indirect reason why the current UARt wrappers - uart_pipe,
console - are instantiated statically just for one underlying UART
device and cannot be reused for multiple devices.
Solve this by allowing to pass an arbitrary user data to irq
callback, set by new uart_irq_callback_user_data_set() function.
Existing uart_irq_callback_set() keeps setting a callback which
will receive pointer to the device.
While public API maintains compatibility, drivers themselves need
to be updated to support arbitrary user data storage/passing (as
legacy uart_irq_callback_set() functionality is now implemented in
terms of it).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Set subCompatibleID value according to "C:\Windows\INF\rndiscmp.inf"
file. The exact matching part is:
"USB\MS_COMP_RNDIS&MS_SUBCOMP_5162001"
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add loopback function. This function can be used to test
USB device drivers and device stack connected to linux host
and has the similar interface as "Gadget Zero" [1] of the Linux
kernel.
Use modprobe usbtest to load the module, see also [2] for the
description of the tests and for Vendor and Product ID of the
"Gadget Zero". The userspace tool testusb [3] is needed to start
the tests.
[1] linux/drivers/usb/gadget/function/f_loopback.c
[2] linux/drivers/usb/misc/usbtest.c
[3] linux/tools/usb/testusb.c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
After PR #8608 every driver should call ethernet_init(), fixes missing
chunks of that PR.
Fixes: #8752
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
bcdUSB has been previously updated from 1.1 to 2.0 in default
device descriptor, but not in DFU class. After USB bus reset
performed by dfu-util, alternative descriptor is registered
with bcdUSB set to 1.1. This mismatch causes communication failure.
DFU descriptor's bcdUSB has been updated to match default one.
Relates to #7570
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Remove all CONFIG_*_EP_ADDR options but keep the default
values for it, as they are necessary to find ep_addr in
usb_ep_cfg_data associated with bEndpointAddress in
interface descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The payload size was hardcoded to 64.
This commit adds a configuration option to choose > 64 bytes
when the device allows larger packets.
A configuration option USB_HID_MAX_PAYLOAD_SIZE is added in
subsys/usb/class/hid/Kconfig
The default value is set to 64
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Adapt functions for new composite interface.
Assign bInterfaceNumber and similar variables of a Interface
default values, these should be valid values for non-composite
configuration. For the case of the composite configuration,
these variables must be set by the interface configuration
function (interface_config) accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch changes all class functions so that the endpoint
address will be retrieved from the usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch moves the descriptor parts to related class
and function drivers and extends the usb_fix_descriptor
function so that the wTotalLength and bNumInterfaces
are corrected before enumeration.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The Kconfig option HID_INTERRUPT_EP_MPS does not have a prompt entry,
so it is not configurable in practice. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use transfer API for ACL out transfers. No extra buffer is requested,
directly use the net buf and update its len on transfer completion.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Bluetooth net buffers have 1-byte reserve, which can be used by HCI bus
driver (uart, spi...) to set packet type (H4).
This fixes assert when building hci_usb with CONFIG_NET_BUF_SIMPLE_LOG.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Calling bt_send from IRQ context is not safe, at least in HCI SPI case.
In the same way as hci_core, create a thread for TX.
This fixes hci_usb sample for 96b_carbon board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
This patch prevents eem_read_cb from trying to allocate a lot of memory.
It may happen that EEM payload size is zero, the eem_read_cb then tries
to allocate a buffer which is 0xfffc bytes large and luckily blocks.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
