This fixes multiple CI issues for the ads1145s0x
driver.
Having a special testcase for the driver limits the
CONFIG_ADC=y and CONFIG_ADC_INIT_PRIORITY adjustment
requirements.
Also fixes address not matching warning for pcal6416a@2
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Commit eb44414af9 modified
test_single_read for early rx buf release.
The commit assumed that tdata.last_rx_buf points to either &tdata.rx_buf[0]
if the driver releases the first buffer or at &rx_buf[5] if the first
buffer is not released. However, where tdata.last_rx_buf points to depends
on the timeout given to uart_rx_enable(), making the test flaky.
This commit modifies the test by keeping track how many bytes have been
received in the first and second buffers.
The function tdata_check_recv_buffer() validates that the sent data
matches the received bytes which may have been split between first and
second buffer.
This fixes the uart_async_api test on the xmc45_relax_kit.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
On the STM32H735G-DK Discovery kit, when connecting a UART from
pin PF7 to PF6, the test uart_async_api passes now.
Signed-off-by: Benjamin Deuter <benjamin.deuter@gmail.com>
Support NXP MRT on LPC55XXX SOC series, enable on
lpcxpresso55s69_cpu0, add test overlay to counter basic api test
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Remove the `app.overlay` file which has been
wrongly added in ad3c5a2 commit. Instead of that
add the ad5592-adc node into `native_posix.overlay` file.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Twister treats board revisions as separate boards, so s32z270dc2_r52
revision D must be added to the filters.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add basic support for ams TSL2561 light sensor. Triggers, attributes
and manual integration time are currently not supported.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Adjust the reg of the CS gpios to fix the warning
about the same value used for all existing nodes.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Add test for card insertion interrupt to SDHC test.
The test will now wait for the card insertion interrupt whenever it is
run without a card in the slot. By inserting a card, the user can verify
that card insertion interrupts work correctly, as this should notify the
test and allow it to proceed.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add in DT the possibility to configure both INT1 and INT2
pin. The driver will then assign one of the two (either 1
or 2, according to what value drdy_pin is set) to a gpio
for receiving drdy interrupts.
The other pin may be used in the future to receive event
interrupts.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add the following improvements to the spi_loopback async test:
- Verify that a set of multiple spi_buf structures can be sent
successfully
- Check that the contents of the RX and TX buffers match after transfer
completion
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add synchronization using semaphores for the UART ISR tx/rx
tests, instead of relying on a single k_yield() call to
ensure all UART ISR work can be completed before validating
the result.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Most tests define a buffer for UART data on the stack,
including the tests testing UART IRQ. Move buffers to
static memory, within the test fixture, which can then
be passed as the user_data to the UART IRQ callback.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This test assumes it can use all configured
NRF_RTC_TIMER_USER_CHAN_COUNT,
But the sync RTC code uses one while it synchronizes.
Let's just disable it the sync rtc.
This fixes an issue where the test fails for a simulated
nrf5340.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Define the storage_partition in the internal flash
instead of the external NOR qspi flash,
so the testcase can PASS on the disco_l4754_iot1 board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix the labels used in io-channels to be consistent in whole
tests/drivers/build_all/sensor/adc.dtsi file.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
This commit adds utilites to parse the RMC and GGA
NMEA0183 messages, which contain all data which shall be
published using the struct gnss_data.
It also adds a test suite for the added utilities.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds parsing utilites for common string
representations of values contained in GNSS messages.
These utilites both parse and validate the integrity of
the data.
Unit tests are also added to validate the parsing
utilities.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Some RTCs don't support the tm_yday and/or tm_wday fields
of the struct rtc_time structure. These RTCs must set the
values of the fields to -1 if they are not supported, and
the test must be able to handle this correctly. This commit
adds an exception to the tm_yday and tm_wday fields allowing
them to be set to -1.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Commit 345735d0a8 removed all uses of the
now obsolete CONFIG_ZTEST_NEW_API Kconfig option. A couple of stray ones
are still remaining in the tree, remove them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a few tests that expect at most one interrupt being triggered when
configuring a GPIO output in two scenarios:
1. From just after booting
2. After another configuration of the same values
Due 1., this patch adds the tests to run before any other tests in the
gpio_basic_api test suite.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
This test cannot be run in this architecture as it does not
support userspace.
Today it is filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Disable power management for this particular test case as it expects a
particular pattern of pm get/puts that isn't matched by the driver and
usage in SoF.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Remove erroneous comments that don't describe what the test is actually
doing. These comments were probably from copy/pasting test code.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Add a simple test to validate that the CAN statistics accessor functions
can be called from user mode threads.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
