On SoC series s32ze, Zephyr application cannot run with MPU
disabled, skipping relevant samples/tests
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
The debug.coredump.backends.logging testcase did use 'console'
Twister harness whereas the test suite itself and the rest of
the testcases are implemented as Ztest. This misalignment
allowed to check basic output expected from the logging backend,
but caused inconsistency of the test suite results because
the 'console' Twister Harness can't use test cases' ID provided
by the 'Ztest' Twister Handler.
It is decided to focus the debug.coredump.backends.* suite
on the coredump backend API testing with Ztest.
The logging backend's resulting output should be tested
by its dedicated test suite debug.coredump.logging_backend
(tests/subsys/debug/coredump).
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Extend coredump_backend tests:
* fix COREDUMP_CMD_VERIFY_STORED_DUMP test was not executed.
* add tests for these coredump commands:
- COREDUMP_QUERY_GET_STORED_DUMP_SIZE,
- COREDUMP_CMD_INVALIDATE_STORED_DUMP,
- COREDUMP_CMD_ERASE_STORED_DUMP,
- COREDUMP_CMD_CLEAR_ERROR.
* extend the out-of-the-treee example 'empty' backend to
execute the new tests.
* fix the test's cmake project name.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Set the backend's context to its control block's context
instead of NULL when doing `log_backend_enable`, as the log
backend UART uses that later.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This fixes multiple CI issues for the ads1145s0x
driver.
Having a special testcase for the driver limits the
CONFIG_ADC=y and CONFIG_ADC_INIT_PRIORITY adjustment
requirements.
Also fixes address not matching warning for pcal6416a@2
Signed-off-by: Nick Ward <nix.ward@gmail.com>
This adds tests for automatic security elevation and retry on security
errors. This includes two tests:
1. where the security is elevated by the central
2. the security is elevated by security request, so pairing is already
in progress.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add set functions for codec capability, to set all
assigned number values in the bt_audio_codec_cap
struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the tests for invalid bt_bap_broadcast_source_get_base
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the tests for invalid bt_bap_broadcast_source_get_id
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit eb44414af9 modified
test_single_read for early rx buf release.
The commit assumed that tdata.last_rx_buf points to either &tdata.rx_buf[0]
if the driver releases the first buffer or at &rx_buf[5] if the first
buffer is not released. However, where tdata.last_rx_buf points to depends
on the timeout given to uart_rx_enable(), making the test flaky.
This commit modifies the test by keeping track how many bytes have been
received in the first and second buffers.
The function tdata_check_recv_buffer() validates that the sent data
matches the received bytes which may have been split between first and
second buffer.
This fixes the uart_async_api test on the xmc45_relax_kit.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
On the STM32H735G-DK Discovery kit, when connecting a UART from
pin PF7 to PF6, the test uart_async_api passes now.
Signed-off-by: Benjamin Deuter <benjamin.deuter@gmail.com>
Support NXP MRT on LPC55XXX SOC series, enable on
lpcxpresso55s69_cpu0, add test overlay to counter basic api test
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The FMADD, FMSUB, FNMSUB and FNMADD instructions occupy major opcode
spaces of their own, separate from LOAD-FP/STORE-FP and OP-FP spaces.
Insert code to cover them.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Remove the `app.overlay` file which has been
wrongly added in ad3c5a2 commit. Instead of that
add the ad5592-adc node into `native_posix.overlay` file.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Relocate new and existing internal software-managed table
access functions from the public `sw_isr_table.h` into a
private header that should only be accessed internally.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Validate the following functions in the sw_isr_table:
- z_get_sw_isr_table_idx
- z_get_sw_isr_device_from_irq
- z_get_sw_isr_irq_from_device
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Twister treats board revisions as separate boards, so s32z270dc2_r52
revision D must be added to the filters.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Adds a new test for ARM Cortex-M architectures with the
CONFIG_ARM_CUSTOM_INTERRUPT_CONTROLLER option enabled.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Add basic support for ams TSL2561 light sensor. Triggers, attributes
and manual integration time are currently not supported.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
PR allows to get rid of tinycrypt objects from
the final binary of the ble mesh apps based on
PSA TFM crypto.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Further reduce code duplication by moving test code for similar test
cases into a helper function, parametrized based on the test case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move code responsible for net context initialization, repeated over
multiple test cases, to a helper function to reduce code duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modify internal L4 protocols APIs, to allow to enforce checksum
calculation, regardless of the checksum HW offloading capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modified the BabbleSim test for the Bluetooth test under the
host/privacy/peripheral category. Added the RPA check in the scan
callback context of the scanning tester device to validate if the
DUT advertising address is correct.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the scope of the BabbleSim test for the Bluetooth test under
the host/privacy/peripheral category. The tests ensures correct RPA
advertising after the system a reboot when the Bluetooth identities
are preloaded from the Settings subsystem.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Moves the USB CDC device to the USB CDC port instead of wrongly
using the serial port, this was not used but is needed to prevent a
build error added to MCUboot which prevents using the same device
for console and serial recovery chosen nodes
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
