Add pytest to test the output of dictionary logging to make sure
the encoded logs can be decoded back into strings, and to also
make sure the decoded logs have the expected strings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation for introducing pytest to test the output
of dictionary logging. Code is the same, but the testcase.yaml
is trimmed to only those that can be tested.
Note that a copy is made instead of moving the whole sample over
is simply due to various documentation having references to
the sample. Since RST files under tests/ are not parsed for
zephyr:code-sample:<name>, the linking would have been vanished.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add test cases for testing basic CFB functions.
These tests cannot run in CI because the CI environment has no display.
Mark these tests as `build_only`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
When the CMUX is released from its pipe, it must stop transmitting
data to it, and prevent starting any work which requires
transmitting data like connecting CMUX or opening a DLCI pipe.
This commit extends the CMUX test suite to validate this behavior.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add a new test case that verifies that llext_find_section() returns the
correct offset for a symbol in a loadable extension. This exploits the
fact that in the STORAGE_WRITABLE cases, the symbol addresses will be
inside the ELF file buffer, so they can be easily compared.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch reworks the testcase.yaml and sample.yaml files for the llext
subsystem to further reduce the number of tests performed by CI while
improving overall coverage.
The following changes are introduced by this commit:
- Remove the arch_allow field from the common section to allow any arch
to be tested in the build_only test. All other tests explicitly narrow
down the arches they are applicable to.
- In addition to platforms with active issues, also exclude a number of
platforms that are always skipped by the runtime filter due to
RAM/Flash limitations.
- Add integration_platforms to limit the test count to a few selected
platforms which are representative of the different arches.
- Remove a number of duplicate SLID tests and group them into a single
test that covers both ARM and Xtensa architectures.
- Test the relocatable case on ARM as well.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The ELF files should be aligned to at least sizeof(elf_word) to avoid
issues. Use a larger value to ease debugging, since it reduces the
differences in addresses between similar runs.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
- Increase the test coverage of supported platforms.
- Fix test_flash_area_check_int_sha256 for platforms with
flash program size >32. Increase the supported flash program size
to 512 (maximum supported by Zephyr platforms now).
- Fix test_flash_area_get_sectors test for platforms
with maximum number of sectors per image slot >256.
Increase the support value to 1024.
- Fix possible stack size overflow.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Running the tests/subsys/lorawan/clock_sync/ requires a long timeout
to pass. Set a timeout: 500 to cover most of the usecase
Signed-off-by: Francois Ramu <francois.ramu@st.com>
These Kconfigs should have been deprecated for more than 2
releases, remove them:
- `CONFIG_CPP_MAIN`
- `CONFIG_CPLUSPLUS`
- `CONFIG_LIB_CPLUSPLUS`
- `CONFIG_EXCEPTIONS`
- `CONFIG_RTTI`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`CONFIG_LOG_DOMAIN_ID` has been deprecated for years and
shouldn't be used according to its documentation, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
In 0be0d2175b (cmake: modules: extensions: Revert using common
board files), the overlay for `native_sim/native/64` in the settings
functional file test was not recreated. Duplicate the overlay used for
the `native_sim` target to support this test correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As part of ongoing work to move away from TinyCrypt and towards PSA
(#43712), introduce a PSA option and remove the TinyCrypt one for the
SHA-256 implementation.
The Mbed TLS implementation is modified to use `mbedtls_sha256`
directly for smaller code size.
As of now the implementation defaults to PSA only if TF-M is enabled
because a dependency loop happens if using `PSA_CRYPTO_CLIENT` as a
condition in `FLASH_AREA_CHECK_INTEGRITY_BACKEND`.
A test case is added for the PSA implementation, and an NS platform is
added to the base test case to verify the compilation on a TF-M-enabled
platform.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This patch file updates the use of assertion macros
comparing strings.
Command line used:
```
./scripts/coccicheck --mode=patch \
--cocci=scripts/coccinelle/ztest_strcmp.cocci tests/
```
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
These tests are simple copies of the existing tests with the addition of
the CONFIG_MODULES=y option. This different Kconfig setting has no
practical effect on the code, and the tests are therefore redundant.
Remove them to halve the number of tests.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Fix offset read for verification and comparison of read to
erased value, where type mismatch has been causing fails in
comparisons.
Fixes#74066
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
With the ztest code added, tests were failing with -ENOMEM on the
mps2/an385/*_mpu platform due to alignment requirements.
Increase the llext test heap size to 32Kbytes to avoid this.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Some tests depend on global initialized variables, which are then
modified during the test. When enabling user mode, the functions are
called multiple times but the variables are not reinitialized, resulting
in a test failure.
This patch adds a run_id variable to the tests to reinitialize the
variables when the test is called multiple times. It is purposefully
initialized to 41 at startup to detect if the variable is not set up
properly by the llext loader.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Most of the current llext tests did not actually check the results of
the tests, so the CI reported a pass even if something was wrong when
looking at the logs. This patch adds the appropriate zassert_* macros to
all the tests, to ensure that they actually perform correctly.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Reduce RAM disk size from 192 sectors down to 1 sector to solve linking
issue due to qemu_cortex_m3 target having too little RAM. The RAM disk
size does not really matter in this test case and should be as small as
possible.
Enable test random generator to solve missing sys_rand_get() required by
networking subsystem.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add a symbol to enable device power state constraints this
saves resources when this feature is not needed.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Test that device pm state constraints work as expected.
It declares a device in DT that specify that two pm states cause
power loss and use this information when the device is in the middle
of an action.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The test is broken in CI because the emulated spi bus is not built in,
adding an explicit CONFIG_EMUL=y to the test config.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Moves the rtio_ prefixed lockfree queues to sys alongside existing
mpsc/spsc pbuf, ringbuf, and similar queue-like data structures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add the test cases for Sensing(Sensing Subsystem) to verify the
functionality of sensing portion of subsystem.
The test cases are based on native_sim platform.
Signed-off-by: Qianru Huang <qianru.huang@intel.com>
Check that a power state that has system-managed device power
management disabled does not trigger device power management
when the system sleeps.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Make it possible to disble device power management individually per
power state. This allows targets tuning which states should
(and which should not) trigger device power management.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The commit adds nrf54l15pdk/nrf54l15/cpuapp to list of allowed
platforms for default test configuration.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Use flash_area_flatten instead of flash_area_erase; this allows
to run tests on devices that do not require explicit erase
before write or do not provide the callback.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The Settings test wipe out areas to have a start clean,
so flash_arae_flatten will do that form them for program-erase
and no-erase devices.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Test of file systems use flash_area_erase to erase device
to have a clear start for tests; switching to flash_area_flatten
allows them to do the same with devices that do not explicit
call to erase procedure before write.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The NVS currently requires explict erase capability of
a device to work, so usage of flash_erase has been replaced
with flash_flatten.
There has been additional LOG_WRN added to warn user that
NVS may not efficiently work with device that do not really
have erase.
Currently NVS relies on devices that require erase.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
