Add missing pull-up for RX pin in nrf54h20dk dual uart configuration.
Lack of pull-up was causing test failures.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
RTCs support a variety of combinations of alarm time fields, set
by the alarm time mask. Until now, alarm tests have selected
only the minute and hour fields, as these are always supported,
but some RTCs require setting every supported field when setting
the alarm time, while other RTCs don't support setting every field.
To support all RTCs in the test suite, a configuration has been
added which makes the alarm time mask configurable. Boards can now
define the specific alarm time mask they want to test within
their boards .conf files.
Additionally, the alarm tests have been refactored to not depend
on the time.h library to determine the struct rtc_time times to
set as these are constant, so they are now provided as const
structs instead.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
nRF54H20 USB device controller cannot be enabled without VBUS, but the
device should not be connected to the host during testing. Add it to
build_only section.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not halt control endpoint, control endpoint may not be enabled when
there no host is connected. Yield after buffer is queued to allow the
driver to work.
Tweak pool size and number of buffers to pass the test with high-speed
drivers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Restore the default CAN bitrates after having tested setting bitrate and
timing. This ensures the arbitration phase bitrate is proportional to the
data phase bitrate, allowing CAN FD transmission tests to complete.
Fixes: #73723
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add pytest to test the output of dictionary logging to make sure
the encoded logs can be decoded back into strings, and to also
make sure the decoded logs have the expected strings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is in preparation for introducing pytest to test the output
of dictionary logging. Code is the same, but the testcase.yaml
is trimmed to only those that can be tested.
Note that a copy is made instead of moving the whole sample over
is simply due to various documentation having references to
the sample. Since RST files under tests/ are not parsed for
zephyr:code-sample:<name>, the linking would have been vanished.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add test cases for testing basic CFB functions.
These tests cannot run in CI because the CI environment has no display.
Mark these tests as `build_only`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add validation of the number of ASEs in control point
write requests.
This validates that the number of ASEs
in the control point is not greater than the total number
of ASEs we support.
This also validates that the GATT MTU is large enough to
hold all the responses from the write since those can only be
sent as notifications and never be truncated.
Finally this validates and updates the size of the buffer used to
hold the responses, which may be an optimization for some builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `type` parameter of `struct bt_le_scan_param` is documented as
taking a `BT_LE_SCAN_TYPE_*` value, not a `BT_HCI_LE_SCAN_*` value.
In practice this makes no difference as the values are defined as the
same integer, but does result in `<zephyr/bluetooth/hci.h>` not needing
to be included.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The macro was changed to return a const pointer, but the
BTP use the returned pointer in a non-const way.
Modify the usage so that the macro is used to initialize
the adv_param instead, and then provide a non-const pointer
to tester_gap_create_adv_instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some controllers, like the SoftDevice Controller can miss the first few
advertisements after the host tells it to start scanning. The DUT would
assumes the first RPA advertisements report it gets is the first that
was sent, but it was actually not the first. This would skew the
tester's judgement about the timing of RPA rotations.
To remedy this, the tester will scan continuously and switch between
expecting the identity address and the RPA without stopping the scanner.
The tester will tell the DUT to switch to RPA after it has received the
identity address advertisement. This ensures that the tester will not
miss the first RPA advertisement.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Move the implementation of zsock_select() to zvfs_select(). This
allows other types of file descriptors to also make use of
select() functionality even when the network subsystem is not
enabled.
Additionally, it partially removes a dependency cycle between
posix and networking by moving functionality into a mutual
dependency.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Move the implementation of zsock_poll to zvfs_poll. This allows
other types of file descriptors to also make use of poll()
functionality even when the network subsystem is not enabled.
Additionally, it partially removes a dependency cycle between
posix and networking by moving functionality into a mutual
dependency.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This nucleo board inherit from the root `h5` dts some special nodes:
- `vbat` on adc1 channel 2
- `vref` on adc1 channel 17
- `die_temp` on adc1 channel 16
The issue is discussed here:
https://github.com/zephyrproject-rtos/zephyr/issues/72914
Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
The two functions did not have unit tests, and at least one
issue with input validation have been indentified and fixed
prior to these.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit reduces `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE` from
2048 to 1024 for the SiFive HiFive1 board.
Otherwise, the test fails on the following assert from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Patryk Koscik <pkoscik@antmicro.com>
Optee driver should handle GET_THREAD_COUNT call. This limitation is
set in Optee-OS during build and limits number of symultanious calls
to optee. Add sym to handle this limitation.
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Capabilities should be set correctly or optee will show error message:
[00:00:00.000,000] <err> optee: OPTEE does not support dynamic shared
memory
Test suite should set optee UID or the following error message should
be displayed:
[00:00:00.000,000] <err> optee: OPTEE API UID mismatch
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
During SMC_RPC_FUNC_ALLOC call optee driver puts new shm object to a4
and a5 variables and then expects this object to be in a1 and a2 from
OP-TEE OS. Fixed behaviour so normal_call callback will act the same
way as OP-TEE OS
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
This should test OP-TEE driver basic functionality without
communication with real OPTEE OS.
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
The board didn't have a proper overlay for the test and failed to build
the test case causing CI failures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Fix the devicetree bindings to actually be used as the default
configuration, following the example set by various ST sensor devices.
This requires sadly dropping enums and using #defines for various
options as well as repeating many numbers, but presumably is the way to
do it given the precedent set by ST with sensors like the lsm6dso.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The Renesas RA HAL isn't compatible with the C++98 standard so
skipping the test ek_ra8m1 on CI
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Add support for the EK RA8M1 board
This board is using Renesas RA8M1 MCU.
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Make sure we at least build test the network socket tracing
support. The tracing tests do not enable networking so do the
socket tracing tests here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When the CMUX is released from its pipe, it must stop transmitting
data to it, and prevent starting any work which requires
transmitting data like connecting CMUX or opening a DLCI pipe.
This commit extends the CMUX test suite to validate this behavior.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
For each of the fdtable.h functions listed below, convert the
z_ prefixed semi-private functions to use the zvfs_ prefix.
ZVFS stands for Zephyr Virtual File System and
is intended to be a common library used by the C library,
POSIX API, Networking, Filesystem, and other areas.
There are already a few functions in fdtable.h that use the
zvfs_ prefix, so this change is mostly about unifying them in
a way that uses a suitable prefix ("namespace") so that it can
be considered a public API.
- z_alloc_fd
- z_fdtable_call_ioctl
- z_finalize_fd
- z_finalize_typed_fd
- z_free_fd
- z_get_fd_obj
- z_get_fd_obj_and_vtable
- z_get_obj_lock_and_cond
- z_reserve_fd
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add a new test case that verifies that llext_find_section() returns the
correct offset for a symbol in a loadable extension. This exploits the
fact that in the STORAGE_WRITABLE cases, the symbol addresses will be
inside the ELF file buffer, so they can be easily compared.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch reworks the testcase.yaml and sample.yaml files for the llext
subsystem to further reduce the number of tests performed by CI while
improving overall coverage.
The following changes are introduced by this commit:
- Remove the arch_allow field from the common section to allow any arch
to be tested in the build_only test. All other tests explicitly narrow
down the arches they are applicable to.
- In addition to platforms with active issues, also exclude a number of
platforms that are always skipped by the runtime filter due to
RAM/Flash limitations.
- Add integration_platforms to limit the test count to a few selected
platforms which are representative of the different arches.
- Remove a number of duplicate SLID tests and group them into a single
test that covers both ARM and Xtensa architectures.
- Test the relocatable case on ARM as well.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The ELF files should be aligned to at least sizeof(elf_word) to avoid
issues. Use a larger value to ease debugging, since it reduces the
differences in addresses between similar runs.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
When content validation fails it is rather difficult to figure out the
cause if some meaningless byte mismatches another meaningless byte.
Let's store each memory location with its own virtual address so if a
mismatch occurs when reading it back it is obvious where it comes from.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Make sure constructors are run even when not using C++.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
- Increase the test coverage of supported platforms.
- Fix test_flash_area_check_int_sha256 for platforms with
flash program size >32. Increase the supported flash program size
to 512 (maximum supported by Zephyr platforms now).
- Fix test_flash_area_get_sectors test for platforms
with maximum number of sectors per image slot >256.
Increase the support value to 1024.
- Fix possible stack size overflow.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
When running this test with multiple counter instances enabled that
support different capabilities, if one of the instances does not
support the test required capabilities, the test will be
immediately skipped not giving the chance to run to the subsequent
instances.
Fix this by marking the test as skipped, only of all counter instances
under test were skipped.
Fixes#74358
Signed-off-by: Manuel Argüelles <marguelles.dev@gmail.com>
Update test_lib_self_transition_smf.c to detect the bug that was in
smf_set_handled().
Also delete unneeded test state STATE_D_ENTRY
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
This test explicity enables the POSIX_API which is
not compatible with native_posix.
Let's exclude this target.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
