Change so that num_completed_packets event handling is also
enabled for broadcast ISO only builds. This is because sending
data on a broadcast ISO still generates this event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
STM32WL features a specific HSE clock with dedicated properties.
Add a dedicated binding and update STM32 clock control driver
header to take it into account.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
So far pcie_get_mbar() has been the only way to retrieve a MBAR. But
it's logic does not fit all uses cases as we will see further.
The meaning of its parameter "index" is not about BAR index but about
a valid Base Address count instead. It's an arbitrary way to index
MBARs unrelated to the actual BAR index.
While this has proven to be just the function we needed so far, this has
not been the case for MSI-X, which one (through BIR info) needs to
access the BAR by their actual index. Same as ivshmem in fact, though
that one did not generate any bug since it never has IO BARs nor 64bits
BARs (so far?).
So:
- renaming existing pcie_get_mbar() to pcie_probe_mbar(), which is a
more relevant name as it indeed probes the BARs to find the nth valid
one.
- Introducing a new pcie_get_mbar() which this time really asks for the
BAR index.
- Applying the change where relevant. So all use pcie_probe_mbar() now
but MSI-X and ivshmem.
Fixes#37444
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is the configuration of the stm32h723 where the
dma1 & dma2 of type V1 with a MUX. Even if DMA is of type V1,
the 'feature' does not exist with DMAMUX
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Clarify the PWM pwm_pin_set_cycles() function API details.
The API aims for synchronous (glitch-free) updates of the PWM period and
pulse width, but not all PWM controllers support this.
Similarly, the API aims for independance between channels on
multi-channel PWM controllers, but not all PWM controllers support this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change the behaviour of `lora_send` to block until the transmission
completes. The current asynchronous behaviour is exposed through the
new function `lora_send_async`. This naming convention brings LoRa in
line with other asynchronous subsystems.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add sensor API hysteresis attribute. This attribute allows for
configuring trigger threshold hysteresis values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The timeout parameter for `lora_recv` is no longer a millisecond value
but a standard `k_timeout_t` value.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fixup the doxygen comments for return values on `_dt` functions.
@retval should only be used when specifying actual return values,
@return is more general and can refer to other functions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add variants of all i2c transfer functions that accept an `i2c_dt_spec`
as the bus specifier. This helps reduce code duplication in device
drivers.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Introduces the `struct i2c_dt_spec` type, which contains the complete
I2c bus information derived from devicetree. It serves the same purpose
as `struct spi_dt_spec` in that it can be constructed automatically in
`DEVICE_DT_INST_DEFINE` macros and provided as a single handle to I2C
API calls. While I2C has much less instance configuration than SPI, this
is still useful to enable the following pattern in device drivers that
support both I2C and SPI comms:
```
struct config {
union {
struct spi_dt_spec spi;
struct i2c_dt_spec i2c;
};
};
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update doxygen usage of `@retval` to specify the value for each case,
instead of a chain of logic from the one `@retval`.
https://www.doxygen.nl/manual/commands.html#cmdretval
Convert `@retval`'s that simply reference another function to `@return`.
Convert some custom notes to `@note`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Microchip MCP7940N is a Real-Time Clock/Calendar. It operates on a I2C
bus. It can be used to set a calendar time and has two alarm channels.
When an alarm is asserted the state of the MPF pin of the MCP7940N will
change (depending on gpio active high/active low setting) to trigger an
interrupt.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
Add initial basic description for Cortex-M33 based
stm32u5 soc series.
This encompass description for base nodes, such as:
- cpu
- flash
- clocks
- sram
Additionally, provide description for variant stm32u575Xi.
Related to clocks nodes, added bindings for stm32u5 specific
rcc node as well as msi and pll clocks.
Header file stm32_clock_control.h was also updated to support
these new bindings.
Note that for compatibility with existing definitions, clock
node describing main pll clock, known as "PLL1", was given two
labels: "pll" and "pll1".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This driver supports the TI INA230 and INA231 Bidirectional Current
and Power Monitors. The devices work on the I2C interface and are
created from DT nodes with a compatible property matching "ti,ina23x".
The following datasheets were referenced while developing the driver:
https://www.ti.com/product/INA230https://www.ti.com/product/INA231
Twister passed:
twister -T tests/drivers/build_all/sensor/
Testing was performed on the stm32g071b_disco board with the following:
Load: ~170 ohms
Voltage: 5V
Measured Values:
Voltage: 5.1 V
Current: 0.032 A
Power: 0.157 W
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
The KBC/ACPI event data is 4-byte in width and composed of
event/data/type fields. However, the field position is defined by each
chip vendor via macro and not unified in the current implementation.
The commit uses the structure bit field to define and unify the field
position. It helps the application access it with a common approach.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Add driver implementation and header files for a MEC172x
aggregated interrupt driver. Enable the parent(ECIA) node
to have the driver initialize interrupt hardware for use.
Enable child nodes for those GIRQs used for aggregation.
Refer to chip documention for the list of GIRQs restricted
to aggregation and those which support direct mode.
Add chip level device tree node for MEC172x EC interrupt
aggregator parent and GIRQ children. Each child node contains
a list of sources representing the source bit position in the
GIRQ registers.
Add DT bindings for ECIA and GIRQ nodes.
Add build file(s) and configuration items for the MEC172x ECIA
aggregated interrupt driver. Add and enable the MEC172x interrupt
driver on the MEC172x evaluation board(EVB). Enable parent node to
initialize ECIA hardware. Child nodes are left disabled until a
future driver needs them.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The macro to set the element of the dma-cells for each peripheral
are defined in the dma_stm32 header file
and used in the periph driver (as dma client)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Implement a clock control driver for Microchip MEC172x handling
configuring the 32 KHz input sources for the PLL and peripheral-32k
clock domains. MEC172x differs from MEC152x. MEC152x had one 32K source
for both PLL and peripherals. MEC172x allows the two domains to use
independent 32 KHz sources. Device tree updated to provide addresses
of hardware used by the driver.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
sensor_value_to_double should never alter the given value of val.
Therefore adding a const qualifier makes sense.
Signed-off-by: Jonathan Hahn <Jonathan.Hahn@t-online.de>
A syscon device is a device managing a memory region containing a set of
registers that are not cohesive enough to represent as any specific type
of device. We need a driver for that because several other drivers could
use the same region at the same time and we need to io-map the region at
boot for MMU enabled platforms.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add helper functions to simplify the usage of `struct spi_dt_spec`.
Implements helpers for the standard synchronous calls (transceive, read,
write).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Introduces the `struct spi_dt_spec` type, which contains the complete
SPI bus information derived from devicetree. It serves the same purpose
as `struct gpio_dt_spec` in that it can be constructed automatically in
`DEVICE_DT_INST_DEFINE` macros and provided as a single handle to SPI
API calls. Includes a single function, `spi_is_ready` that validates all
SPI bus dependencies are ready.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Use only boolean in if conditions as new coding style implies for edac
API header file.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove #ifdefs making code cleaner and including error injection API
functions to documentation.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor EDAC API making it more clear, removing unneeded typedefs and
using check for optional and assert for mandatory APIs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Similar to Sphinx, @kconfig{} alias should be used in Doxygen docstring
in order to reference a Kconfig option. @option{} is still kept for
compatibility reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
