compiler_barrier() is itself defined down in this file. Without
adding it, newer versions of GCC (7+) for ARM Cortex-M may mistakenly
coalesce multiple strb/strh/str (store byte/half-word/word)
instructions, which support unaligned access on some
sub-architectures (Cortex-M3 and higher, but not on Cortex-M0),
into strd (store double), which doesn't support unaligned access.
Fixes: #6307
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The adv_send() function was incorrectly decoding the 5-bit value (it
was using it directly as milliseconds), which effectively lead to the
code always picking the controller's minimum supported interval.
Fix this issue, but do it by simplifying the (re)transmission state
tracking so that the state is always stored in the original "packed"
8-bit value, where 5 bits are reserved for the interval, and 3 for the
count.
Fixes#7972
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
k_work_init() was not initializing all fields in the k_work struct.
Mainly, the atomic_clear_bit() function call was reading a possibly
uninitialized value, clearing a bit, and assigning it back to the
`flags` member. The `_reserved` member was never initialized.
With the struct now initialized with the _K_WORK_INITIALIZER() macro,
initialization is consistent regardless of how a `struct k_work` is
initialized.
This fixes the Valgrind issues found in #7478.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Corrected description of wdt_install_timeout function return value. The
function returns index of the channel to which the timeout was assigned.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
* the original stack check codes have no consideration
for userspace case. This will wrong cause possible stack
check exception.
* this commit refactors the arc stack check support to
support the usperspace.
* this commit fixes#7885. All the failed tests in #7885
are run again to verify this commit. The test results are ok
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The logic for using _Static_assert() was a little broken. We were
using it when on GCC 4.6+ AND when __STDC_VERSION__ said we were on
C99 or better. But it's not a C99 feature, it's a C11 feature. And
if GCC provides it as an extension, that's unrelated to a particular
language version. This should have been "GCC 4.6+ OR C11+".
This actually broke on the ESP-32 IDF toolchain, where (when using
-std=c99) the compiler was actually defining a C99 macro instead of
the C11 one, and choosing to use the wrong (and independently broken)
handling incorrectly. Fixes#8093.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Layer code mask is 0x7FF so obviously 0x802 is not valid (as it will
always set the synchronous bit).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
GPIO API was not shown in doxygen output and on website because the
defgroup was closed prematurely. The closing brackets are still present
on the end of the file, so the additional closing can be safely deleted.
Fixes#8142
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Previously, the stack buffer array wasn't being page-aligned.
If private kernel data was stored after the stack buffer in
the same page, the current thread would incorrectly have
access to it. Round stack sizes up on x86 to prevent this
problem.
Fixes#8118
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's not possible to enforce that K_THREAD_STACK_SIZEOF()
returns the original number passed to K_THREAD_STACK_DEFINE().
Some arches need to round this number up in order to satisfy
alignment constraints.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The r7 register is used as a frame pointer on ARM Thumb. As result, it
cannot be modified by the assembly code in functions using stack frame.
This commit replaces r7 by r8, which is a general purpose register.
Also it fixes#7704.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Change the zero latency interrupt priority level from 2 to 1.
This is the priority level that the kernel has reserved for the
zero latency IRQ feature by the _IRQ_PRIO_OFFSET constant.
The zero latency IRQ will now not be masked by the irq_lock function.
Update comments to reflect the priority levels reserved by the kernel.
Fixes: #8073
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Because the address alignment of MPUv2, the address should
not only be aligned at the start but also for the array member.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
We want the struct to be packed to conserve space, but the
perms field needs to always be on a 4-byte boundary since
we do bitfield operations on it, arches like ARC require
that the sys_bitfield_* operations be aligned to a 4 byte
boundary.
Instances of struct _k_object will now be 4-byte aligned
if in an array (which they are), even though the members
are still packed.
Fixes: #7776
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit removes a redundant #ifdef check for
CONFIG_CPU_CORTEX_M_HAS_BASEPRI, which is covered
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS, present
in the same ifdef check.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Implement the new entropy_get_entropy_isr() function to allow the kernel
to collect entropy before the scheduler and kernel data structures are
ready. Switch to an nrf-specific version for high-performance
requirements in the BLE Link Layer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to address the requirements of the kernel boot process, an
optional ISR-specific function is declared to allow entropy collection
outside of thread mode and without using any kernel primitives. It also
includes a parameter to optionally busy-wait for hardware entropy
generation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
CONFIG_UART_NSIM depends on CONFIG_NSIM, which was removed in commit
9bc69a46fa ("boards: Update arc em_starterkit support from 2.2 to
2.3"). Remove the dependency, and also remove the CONFIG_NSIM=y setting
from the test_nsim test (which should now work).
Also change the condition for EXTERN()ing _VectorTable in
include/arch/arc/v2/linker.ld to check CONFIG_UART_NSIM instead of
CONFIG_NSIM. I'm guessing the EXTERN() is there to make the symbol
visible to nSIM, though I don't know anything about it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add requirement ID place holders based on APIS. The requirements will
appear as a list in doxygen documentation. The IDs will be expanded with
more details somewhere else, probably a requirement catalog on GH or
some other requirement management tool. This is still TBD.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Very simple implementation of deadline scheduling. Works by storing a
single word in each thread containing a deadline, setting it (as a
delta from "now") via a single new API call, and using it as extra
input to the existing thread priority comparison function when
priorities are equal.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Upon return from a syscall handlers, the r1, r2, and r3 registers
could contain random kernel data that should not be leaked to user
mode. Zero these out before returning from _arm_do_syscall().
Fixes#7753.
The invocation macros need a clobber if r1, r2, or r3 are not used
to carry syscall arguments. This is a partial fix for #7754 but
there appear to be other issues.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The change changes the type of the attribute count in the
bt_gatt_service struct to size_t.
The background for the change is that with this variable being a
u16_t, we assign something that has been cast to an unsigned long
(from "ARRAY_SIZE") to an u16_t variable, and that Lint complains
about a loss of information (27 bits to 16 bits in the case I found).
(The issue seems to be not only about the cast, but about what is
casted. I suspect that Lint may be confused by the magic of
ZERO_OR_COMPILE_ERROR.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This adds example and testing code for CAN driver.
Tested on stm32f072b disco.
Examples are given for:
- can_configure
- can_attach_isr
- can_attach_msgq
- can_send
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This API defines following calls
- can_configure
- can_send
- can_attach_isr
- can_attach_msgq
- can_detach
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The pthread mutex changes went in with an adaptation to build with the
new wait queue API, but they did it by using the old dlist hooks
directly through typecasting and union assignment. That... is sort of
the opposite of the intent to having the new API be abstracted. The
pthread code worked, but failed once wait queues (on x86) stopped
being dlists.
Simple fix once I saw the problem, anyway.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This replaces the existing scheduler (but not priority handling)
implementation with a somewhat simpler one. Behavior as to thread
selection does not change. New features:
+ Unifies SMP and uniprocessing selection code (with the sole
exception of the "cache" trick not being possible in SMP).
+ The old static multi-queue implementation is gone and has been
replaced with a build-time choice of either a "dumb" list
implementation (faster and significantly smaller for apps with only
a few threads) or a balanced tree queue which scales well to
arbitrary numbers of threads and priority levels. This is
controlled via the CONFIG_SCHED_DUMB kconfig variable.
+ The balanced tree implementation is usable symmetrically for the
wait_q abstraction, fixing a scalability glitch Zephyr had when many
threads were waiting on a single object. This can be selected via
CONFIG_WAITQ_FAST.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The scheduler priq implementation was taking advantage of a subtle
behavior of the way the tree presents the order of its arguments (the
node being inserted is always first). But it turns out the tree got
that wrong in one spot.
As this was subtle voodoo to begin with, it should have been
documented first. Similarly add a little code to the test case to
guarantee this in the future.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This constant should be defined in limits.h. Define it in limits.h in
the minimal libc, and use the definition found in newlib's includes.
Values in newlib includes range from 1024 to 4096.
The rationale is that all code should use the same value; having
buffers specified with different sizes will lead to interoperability
and out of bounds array writes.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Minimal driver for ILI9340 LCD display driver including support
for adafruit 2.2" LCD display (1480)
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Add IEEE 1003.1 Posix Style file system API support.
These API's will internally use corresponding Zephyr
File System API's.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The Bluetooth core specification splits the valid LE L2CAP PSM range
into two subranges:
- Standard, SIG-assigned fixed PSM values in the range 0x0001-0x007f
- Dynamic, allocated at runtime in the range 0x0080-0x00ff
Previously the bt_l2cap_server_register() API was assuming that the
app would always decide the PSM, which effectively made it impossible
to have collision-free dynamic PSMs. This patch extends the
implementation so that if server->psm is 0, then the stack will look
for a free PSM from the dynamic range and take it into use.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There were multiple spots where code was using the _wait_q_t
abstraction as a synonym for a dlist and doing direct list management
on them with the dlist APIs. Refactor _wait_q_t into a proper opaque
struct (not a typedef for sys_dlist_t) and write a simple wrapper API
for the existing usages. Now replacement of wait_q with a different
data structure is much cleaner.
Note that there were some SYS_DLIST_FOR_EACH_SAFE loops in mailbox.c
that got replaced by the normal/non-safe macro. While these loops do
mutate the list in the code body, they always do an early return in
those circumstances instead of returning into the macro'd for() loop,
so the _SAFE usage was needless.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
k_poll is now accessible from user mode. A memory allocation takes place
from the caller's resource pool to copy the provided poll_events
array; this can be large enough to make allocating it on the stack
not preferable.
k_poll_signal are now proper kernel objects. Two APIs have been added,
one to reset the signaled state and one to check the current signaled
state and result value.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
User mode may now use queue objects. Instead of embedding the kernel's
linked list information directly in the data item, a container struct
is allocated from the caller's resource pool which is then added to
the queue. The new sflist type is now used to store a flag indicating
whether a data item needs to be freed when removed from the queue.
FIFO/LIFOs are derived from k_queues and have had allocator functions
added.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The mcux sim clock control driver was originally designed to pass
through the clock subsystem value from dts to the mcux CLOCK_GetFreq()
function. This assumed that the values in
include/dt-bindings/clock/kinetis_sim.h matched the enumeration in
fsl_clock.h, which is true for the coresys, platform, and bus clocks.
However, the low-power oscillator (LPO) clock has a different values in
k64 vs. kw2xd, therefore we must update the clock_control driver to
parse the value from dts and convert it to the fsl_clock.h enumeration.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch adds a prescaler configuration option that denotes the
number of RTC ticks per second. This is used to calculate the value
for 1 second.
Signed-off-by: Andy Gross <agross@kernel.org>
Works mostly like the list enumeration macros. Implemented by fairly
clever alloca trickery and some subtle "next node" logic. More
convenient for many uses, can be early-exited, but has somewhat larger
code size than rb_walk().
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We get the following warning with CONFIG_DYNAMIC_OBJECTS=n in
_impl_k_object_alloc:
include/kernel.h:322:57: warning: unused parameter ‘otype’ [-Wunused-parameter]
static inline void *_impl_k_object_alloc(enum k_objects otype)
^~~~~
Simple fix is to ARG_UNUSED otype.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will be useful for OpenThread, drivers will need to implement that
fonction to be able to proceed with ED.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
