bt_eatt_connect may now send multiple credit based connection requests.
Previously it would only send one and thus only allow 5 EATT channels to
be connected.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Indicate wether pointer parameters are input or output. This information
is useful for API users.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some values are limited to 32-bit, UINT32_MAX can be used to check if
they overflow.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Group all capture APIs together for better readability. Previous to this
patch, get_cycles() as placed at the end.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Do not convert get_cycles_per_sec() failures to -EIO, just propagate the
failure code since the failure is not handled. As a consequence, all
Doxygen docstrings have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Hide all API ops (typedefs and struct) under INTERNAL_HIDDEN. This is
information required by drivers only, not API clients.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
To allow for high level robustness tests on protocols, add an interface
to control the packet drop rate. A rate of 0 means no packet dropped, a
rate of 1 means all packets being dropped.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Add several new functions to the IPC service API:
- ipc_service_get_tx_buffer()
- ipc_service_drop_tx_buffer()
- ipc_service_send_nocopy()
- ipc_service_release_rx_buffer()
- ipc_service_hold_rx_buffer()
This set of function is used to support backends with nocopy capability.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When using DMA with a circular buffer an application needs to know
where the hardware is in terms of its read and/or write positions.
Without this information, the circular buffer isn't very useful!
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Introduce set/get SO_RCVBUF option using the setsockopt
function. In addition, use the rcvbuf value to set the
tcp recv window.
Signed-off-by: Mohan Kumar Kumar <mohankm@fb.com>
This adds a new CONFIG_LOG2_MSG_PKG_ALWAYS_ADD_RO_STRING_IDXS
kconfig. If enabled, the log message packages will always have
the indexes of read-only string arguments appended to the package.
This will be selected only by those backends requiring it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In order to get rid of the duplication of the code that we had until now
in the tree, consolidate the handling of multiple calls to
bt_hci_cmd_send_sync(BT_HCI_OP_LE_RAND, ...) in a single location,
namely in hci_core.
This allows all of the users of this HCI command to use a single
implementation of the iterated sending of the HCI command to fill a
buffer with random bytes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
LWM2M Client Sample with DTLS enabled fails because TLS_HOSTNAME is set
but MBEDTLS_X509_CRT_PARSE_C is disabled which leads to error
'net_lwm2m_engine: Failed to set TLS_HOSTNAME option: 109'
Add new field hostname_verify to let the application decide if hostname
should be checked.
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL was the last macro to be
deprecated from the DT_CHOSEN_()_LABEL series. All its usages have been
replaced with DT_CHOSEN(zephyr_flash_controller), usually combined with
DEVICE_DT_GET to obtain references at compile time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This patch is doing two things:
- it is removing the fallback on the path. This is not possible anymore
since the DT binding file is now actually requiring the
'zephyr,memory-region' property to be present from which the region
name is obtained.
- it is sanitizing the name when CONFIG_CMAKE_LINKER_GENERATOR is used
or not.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Depending on the stm32 soc and the timer instance, several channels
can enable the complementary output for the PWM signal
This flag completes the PWM_POLARITY for a PWM channel in the
upper byte of the pwm_flags_t.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add 8 bits to the pwm_flags_t so that upper byte is reserved
for non-standard but soc specific dts flags and keeping the low
Byte for standard flags.
Some of SoC like STM32 mcus can then define their own flags
in their dt-bindings/pwm.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adapt logging to always use static packaging. Runtime packaging
is used only when configuration requires that. Static packaging
significantly speeds up logging when there are string arguments.
Update log_stack test to new stack usage.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The `bt_conn_index` simply returns the index
of a `bt_conn` struct. There is no reason why
such a function should not use `const`.
Not using `const` will make other lookup/index
functions that perhaps relies on the bt_conn index
unable to use `const` as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add flag to copy function which indicates that read-only
string locations shall be kept in the output package.
Updated cbprintf_package test to pass.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Convert can_calc_timing() + can_calc_timing_data() to syscalls and use
the newly added syscalls calls for determing the minimum/maximum
supported timing parameter values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add CAN system calls for getting the minimum/maximum timing values
supported by a given CAN controller device driver instance:
- can_get_timing_min()
- can_get_timing_max()
- can_get_timing_min_data()
- can_get_timing_max_data();
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit overrides the toolchain internal `__INTN_C(value)` integer
constant macros to match the types defined by the `zephyr_stdint.h`
header.
For more details, refer to the GitHub issue #44199.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The purpose of this change is to allow to enable more than one
backend at once by removing choice from ipc-service backend Kconfig
and depending backend Kconfig option on existing of correct compatible.
Overwriting IPC_SERVICE_BACKEND option in some places is removes
as no longer needed.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Adds to the dma_status struct the number of free bytes available
in the current transfer buffer.
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Adds a bit flag config option for cyclic transfer lists, where the
transfer list tail may link to its head creating a never ending
loop of transfer descriptors.
DesignWare DMA supports such cyclic transfers.
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Fix all syscon dt bindings clock constants to avoid any overlap, to
prevent case statement in mcux syscon clock driver from failing to
build.
Fixes#44216
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Instead of having one single WQ per backend, move to one WQ per
instance instead and add a new "zephyr,priority" property in the DT to
set the WQ priority of the instance. Fix the sample as well.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add the telephone bearer service server implementation.
This support multiple service instances as well as the
generic telephone bearer service, but is still a work in
progress and should be treated as such.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Based on introduction of plain GPIO configurations in STM32 pinctrl
bindings, update STM32 pinctrl/gpio drivers to make this functionality
available.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
