Remove pre hardware model v2 overlays present for RT11xx boards, that
were missed in the HWMv2 migration
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Unmount and remount filesystem during init, to verify that filesystem
remount works as expected.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Removes references to old tool documentation and refers users to
the list of supported applications instead
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update the sample to use a camera shield with a camera chosen node.
This is not only because the camera nodes in the mimxrt1064 device
tree has been now moved to a separate mt9m114 shield but also to
make the sample more generic.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The default resolution of mt9m114 camera is now changed to 480x272.
Update the sample documentation to reflect this change.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Moves the rtio_ prefixed lockfree queues to sys alongside existing
mpsc/spsc pbuf, ringbuf, and similar queue-like data structures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add testcases for rk043fn02h_ct and rk043fn66hs_ctg shields to display
and LVGL samples, so these testcases will be built by CI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX_CLOCK option does not correspond to any standard
option. It was used to active features of several distinct
POSIX Options and Option Groups, which complicated API and
application configuration as a result.
POSIX_CLOCK is being deprecated in order to ensure that Zephyr's
POSIX Kconfig variables correspond to those defined in the
specification, as of IEEE 1003.1-2017.
Additionally, CONFIG_TIMER is being deprecated because it does
not match the corresponding POSIX Option (_POSIX_TIMERS).
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_TIMERS
Similarly, we introduce the following Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_POSIX_CLOCK_SELECTION
* CONFIG_POSIX_CPUTIME
* CONFIG_POSIX_DELAYTIMER_MAX
* CONFIG_POSIX_MONOTONIC_CLOCK
* CONFIG_POSIX_TIMEOUTS
* CONFIG_POSIX_TIMER_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options that map directly to
standard POSIX Option Groups by simply removing "CONFIG_":
* CONFIG_POSIX_MULTI_PROCESS - sleep()
Similarly, in order to maintain parity with the current feature
set, we introduce the following additional Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_XSI_SINGLE_PROCESS - gettimeofday()
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The commit replaces flash_area_erase with flash_area_flatten,
as it allows to emulate erase and scramble data stored
on devices that do not provide erase callback.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit replaces flash_area_erase with flash_area_flatten,
as it allows to emulate erase and scramble data stored
on devices that do not require explicit erase before write
or do not provide erase callback.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The nxp,imx-csi node was removed from dts in a previous commit
which caused a build failure / regression in CI.
Use DEVICE_DT_GET_ANY() instead of DEVICE_DT_GET_ONE(), since
the latter requires a DT node present, while the former does
not and returns NULL if no such compat exists.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
In the current implementation, the LLEXT linker will only apply
relocations targeting a given symbol if it has a specfic symbol type.
This is overzealous and causes issues on some platforms, as some symbols
that need to be relocated are skipped due to being of a "bad" type.
Ignore the symbol type when performing relocation to solve this problem,
but also add checks to ensure we don't attempt to relocate symbols with
an invalid section index. If such a relocation is found, return an error
instead of ignoring the relocation entry to ensure that it is impossible
to execute code from a (partially) unrelocated LLEXT.
Also remove all hacks added to circumvent this issue:
* qemu_cortex_r5 exclusion from test cases
* unnecessary exclusion of some flags when building with LLEXT EDK
Fixes#72832.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The gsm modem driver is deprecated and will be removed. Remove
the build overlay and dependency on the gsm modem from the
updatehub sample.
The new cellular modem driver and subsystem use the native
networking stack and the pm subsystem, so just like ethernet,
enabling the cellular modem is up to the board configuration.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
This patch removes all uses of the adv auto-resume feature in the
Bluetooth samples. The auto-resume feature is planned for deprecation.
Samples that are not intended to demonstrate a technique to do with
re-connection simply do not restart the advertiser, in interest of
simplicity. The user is expected to reboot the sample when needed.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This test feature is not required and was only used as a dependency in
the usb/console example. It is redundant since the sample already
depends on usb_device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
With the addition of the STM32 hardware semaphore MBOX driver, ICMsg is
now supported on the stm32h747i_disco board.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
When sending a lot of data, a busy error code returned by the IPC is to
be expected. But if the last attempted send returns busy, this error
code is returned to the calling function, causing an error log message.
Fix this by setting return variable to 0 on this acceptable error.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
The type of the resource table is known, casting to and from void* only
hides this type which can prevent the compiler from giving helpful
warnings. One warning would have been the accidental use of
"st_resource_table" in a cast, a struct which does not exist.
Use the fw_resource_table type when dealing with resource tables.
Signed-off-by: Andrew Davis <afd@ti.com>
Temporary solution as there is no such harness as remote.
However console regex are not defined yet.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
This commits reverts two targets back to the default prompt in the Shell
Sample:
* intel_socfpga_agilex_socdk
* intel_socfpga_agilex5_socdk
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The CONFIG_MAX_THREAD_BYTES=3 needs to be set otherwise this error
is printed by CI.
Too many thread objects (17)
Increase CONFIG_MAX_THREAD_BYTES to 3
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It simplifies the macros to create the string descriptors. We also no
longer need placeholders for the SerialNumber descriptor when it is
generated from hwid. In the future, we can store other descriptor types
in the same list.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Shows a simple application which loads extensions and some simple
extensions. While everything is inside Zephyr tree, everything can
actually be build from different directories (even machines), as long as
the EDK is generated from the application and used by the extensions.
More information is available at sample's README.
This sample is build only for twister, as it requires a few steps to be
properly run, namely build the EDK, install it somewhere, build the
extensions using the EDK and finally build the application with the
extensions.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
nRF54H20DK board is first major user of new UDC DWC2 driver.
Add nRF54H20DK (Application CPU) to allowed platforms in USB device
samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Although we can get the number of configured OUT and IN endpoints and
endpoint capabilities from the DWC GHWCFGn registers, we need to
configure the number of endpoint configuration structs at build time. On
some platforms, we cannot access the hardware register at pre-init, so
we use the GHWCFGn values from the devicetree to provide endpoint
capabilities. This can be considered a workaround, and we may change the
upper layer internals to avoid it in the future.
Also, add a new vendor quirk to fill in platform-specific controller
capabilities.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If the controller can detect VBUS state changes, enable USB support only
when the device is connected and disable it when the device is
disconnected.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add HID keyboard sample for the new experimental USB device support.
This is a limited and not fully compliant HID keyboard implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The rcar boards use block variant of LittleFS and Disk Access API,
but have been using proj.conf for Flash API based access.
The commit adds section building boards with pro_blk.conf
into sample.yaml, where rcar boards will now be allowed,
and removes redundant configuration lines from board specific
conf files.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This PR adds a sample demonstrating the use of the
State Machine Framework (SMF)
Instructions are in the README.rst for the sample.
Miro Samek was contacted and gave approval to use the state
diagram in this demo.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
