Add prefixes to MSC enumerators, otherwise they are (ERROR) are
conflicting with other enumerators.
...
subsys/usb/class/mass_storage.c:149:2: error: redeclaration of
enumerator ‘ERROR’
ERROR, /* error */
^~~~~
...
ext/hal/st/stm32cube/stm32f4xx/soc/stm32f4xx.h:216:3: note: previous
definition of ‘ERROR’ was here
ERROR = 0U,
^~~~~
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add HID Device associated with the instance of the HID. This allows to
create several HID instances for multifunction composite device.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add new status callback with usb_cfg_data parameter to be able to
identify instance callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add interface parameter to interface configuration callback to be able
to configure several instances of the same class.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use predefined string for images string descriptors instead
of from DTS build-time generated labels.
This labels will be deprecated.
String content are kept the same as before.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Now flash_map is proper place to obtain all information about
flash-areas boundaries.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Changes in flash_map API makes flash_area structure proper
interface for point the image area instead of direct flash-bank-offsets.
This patch align code to changed APIa and allows to support operation
on the partition in any flash device.
Signed-off-by: Findlay Feng <i@fengch.me>
Given the device can be enumerated as both legacy and composite, we
always need to provide the payload_data buffer.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In composite mode the request handler buffer is common to all functions,
and its size is defined by CONFIG_USB_COMPOSITE_BUFFER_SIZE.
Given the device is enumerated as composite in runtime mode and
as legacy in download mode, we need to define wTransferSize as
the minimum of the two.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The upload code assumes the buffer to use is the DFU provide one, and
not the one provided by the request handler, which is different in
composite mode.
This is only a theoretical issue, as this function is only executed
once the device has been re-enumerated in legacy mode, but that is a
required step before unifying legacy and composite code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The flash_read() function takes an offset from beginning of the flash.
This patch subtract FLASH_BASE_ADDRESS from the absolute address. This
fixes DFU firmware upload.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With an SPI based flash, CONFIG_FLASH_BASE_ADDRESS is not defined. In
that case it is safe to assume that the base address is 0.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As rx_buf & tx_buf are defined with a NETUSB_MTU size, this cause
that the frames over 1500 bytes can not be received and are discarded.
Secondly, as fragmentation is not supported (for UDP and TCP datagram),
increase NETUSB_MTU to the maximum possible ethernet frame size :1522
Signed-off-by: Nicolas LANTZ <nicolas.lantz@ubicore.net>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes bug below:
subsys/usb/class/cdc_acm.c:554:15: error: ‘dev_data’ undeclared (first
use in this function) k_work_init(&dev_data->cb_work,
cdc_acm_irq_callback_work_handler); ^~~~~~~~
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The IRQ callback function of the USB CDC ACM driver can currently be
called from:
- the USB thread when a bulk in or a bulk out interrupt has been
triggered
- the thread calling cdc_acm_irq_rx_enable or cdc_acm_irq_tx_enable when
enabling the interrupt fires an irq (ie if there is data to read or if
there is no pending data to send)
This causes some issues with at least the shell uart backend, as the
IRQ callback function ends up being called twice concurrently in case a
USB driver sends the requested data almost instantaneously. This is the
case for example of the USB nRF driver which uses DMA. In turn this
cause ring_buf_item_get to be called concurrently, leading to data
corruption:
uart:~$ help
Please press the <Tab> button to see all available commandands.
You can also use the e <Tab> button to prompt or auto-coomplelete all
commands or its subcommands.
You can try toto call commands with <-h> or <--help> parameter for
more informatation.
uart:~$
Fix that by always calling the IRQ callback function through the system
work queue.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The bulk of implementation in the current DFU arch is done in the ISR.
This works well when the Flash device is memory mapped as these writes
get done comparatively quickly. However, in case of platforms where
the flash device is sitting on the SPI Bus, this was observed to
cause an exception. This exception may be because there are multiple
function calls consuming larger processing time inside the ISR. The
ISR stack may also end up going deeper and risk stack corruption on
devices with low RAM. To resolve this, we deferred flash write to a
worker thread. Also, some handshaking was added to have synchronization
with the host in accordance with the Host-Device DFU protocol.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Commit e4c447aac3 ("usb: add SoF event") added support for calling the
status callback with the USB_DC_SOF value for each SoF when
CONFIG_USB_DEVICE_SOF is enabled. The CDC ACM driver saves the latest
received status and compares it USB_DC_CONFIGURED to decide if it can
send data to the host. This therefore doesn't work any more when the
status callback is called regulary with USB_DC_SOF.
Fix that by ignoring USB_DC_SOF when saving the latest received status.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allows for hid_ops argument in usb_hid_register_device() to be NULL.
In that case, application does not implement any custom callbacks.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
USB CDC ACM is a serial driver like another. Therefore select both
SERIAL_HAS_DRIVER and SERIAL_SUPPORT_INTERRUPT. This allows one to
enable the console driver without having to enable another serial
driver.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The CDC ACM driver has to emulate the TX and RX interrupts from the USB
ones. However it does not correctly emulate them as "TX buffer empty"
and "RX buffer not empty" interrupts.
For "TX buffer empty" interrupt:
- Reading the interrupt status should not clear the interrupt
- Enabling the interrupt should fire an interrupt if the TX buffer is
empty
- An interrupt should be triggered when the USB device get configured
For "RX buffer not empty" interrupt:
- Reading the interrupt status should not clear the interrupt
- Enabling the interrupt should fire an interrupt if the RX buffer is
not empty
This make the a console on the USB CDC ACM port usable for the shell
and the logs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Idle rate functionality has been implemented for HID USB class.
Bassed on Device Class Definition for Human Interface Devices 1.11.
Tested with USB3CV and host with idle rate.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
HID class now defaults to universal request callbacks in case they
are not provided by the application. This applies to following,
class-specific requests: Get_Report, Set_Report, Get_Idle, Set_Idle,
Get_Protocol and Set_Protocol.
Tested with USB3CV.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
poll_out function was returning the character that was sent. It
happens that it is always constant and the return of this functions is
never tested. Changing it to be a void function.
MISRA-C rule 17.7
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use sys_put_le16() for unaligned access, this is refactored work of
PR #8495
PR #11432
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
patch fix fault due to unaligned access while setting hid
report size on xtensa platform.
Fixes#11266
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
