The function will be used to update the RSI value. The returned value
can be later used in advertisement data for set identification. This
removes the need of specific bt_csis_advertise function so that the user
can call the API to generate new RSI once needed (e.g. on RPA change).
This allows the user to manage the advertisement data to fit it's needs.
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Disabled (0x00)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 33
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x1d
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Unknown EIR field 0x2e: 16e61d64dc45
Name (complete): audio test shell
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
Advertising handle: 0x00
Advertising random address: 4E:21:29:F8:94:93 (Resolvable)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Enabled (0x01)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds client support for switching the active preset along with bsim
tests implementation.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The `name` parameter is redundant, as the `name` and `name-ad` options are
available already as `adv-create` and `adv-param` command parameters.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The unicast client will now read the PACS location value
during the discovery procedure, as well as subscribing to
it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Extend the `vcs init` command with optional parameters to set the
initial VCS state including volume level, mute state and step size.
This is needed to pass qualification test cases listed below:
VCS/SR/CP/BV-01-C,
VCS/SR/CP/BV-02-C,
VCS/SR/CP/BV-02-C,
VCS/SR/CP/BV-04-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Shell command "bt init sync" now correctly enables Bluetooth
synchronously, and "bt init" enables Bluetooth asynchronously.
Fixes#47860.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
Modify the broadcast sink to use a list of streams instead
of an array. This removes the requirement that the array
of stream pointers shall be static, and makes the
broadcast sink API and implementation more similar
to the unicast group and broadcast source.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify from array to list. The list approach is easily
implemented as it is used for the unicast groups, and
using the list approach instead of an array does not
require the array to be static.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This API now becomes a low-level API, in the sense that it should only be
used if the app developer knows what he is doing and wants to ensure a
ATT_MULTIPLE_HANDLE_VALUE_NTF PDU goes on-air.
For the other 99% of use cases, `bt_gatt_notify` should instead be used, as
it will automatically upgrade to ATT_MULTIPLE_HANDLE_VALUE_NTF when
possible.
One can disable the batching of notifications when using `bt_gatt_notify`
by setting CONFIG_BT_GATT_NOTIFY_MULTIPLE_FLUSH_MS=0 .
This API doesn't support lookup by UUID any more.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This change makes the optional procedures in the TBS Client optional
and configurable through Kconfig.
Signed-off-by: Fredrik Danebjer <fredrik@danebjer.com>
In the broadcast sink `scan_recv` which is called when we
scan for broadcast source, we now also provide the entire
AD struct to the application.
The reason for this is that the advertising data may
contain other information that is useful for the application
like the broadcaster device name or any other
vendor/application specific data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify how the ISO channels are allocated for the audio streams,
as well as how the CIG is allocated for the unicast group.
This fixes an issue where the unicast group could not be
fully allocated before _after_ the bt_audio_streams had been
configured by bt_audio_stream_config, thus making it impossible
to create a unicast group before the connections have been established.
This leaves us with 3 basic data types:
1) Streams allocated by the application
2) Endpoints that represent ASEs
3) Audio_iso which is used to couple streams and ISO channels.
The Unicast Group for the unicast client will now have the same
lifetime as the ISO CIG for the central.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add commands to connect to an l2cap channel using Enhanced Credit-based
Flow Control, and to reconfigure it.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When invoked without parameters, `bt connect` will now attempt to connect
to the last scanned device. Used in conjunction with the RSSI filter, this
makes the connection process somewhat scriptable.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This adds an RSSI cutoff, so any scanned devices that are below the given
value (in dB) will not get printed out. Very useful in noisy environments.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Instead of rejecting metadata at the BAP layer, we now
expect the higher layer to provide the verification.
The reason for this is that the higher layer may be better
equiped at determining which metadata it supports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fix removes the Streaming_Audio_Context LTV from the LC3 Codec
helper macro, and subsequently a faulty exposure of this LTV in the
PAC records used.
Signed-off-by: Fredrik Danebjer <fredrik@danebjer.com>
Made it more clear that the disable functionality is to
disable the mute functionality, but and not disabling
the microphone device itself.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename struct bt_micp to bt_mic_ctlr as it is only
used ofr microphone controller now.
This also allow cleanup of the bt_micp struct, thus
removing the common internal micp_internal.h header file
and reducing the size of the implementation by not
using a union of the structs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the existing bt_micp API for the
MICP Microphone Device to be more specific
by adding mic_dev as an infix. This follows
the naming scheme used for the MICP microphone
controller (mic_ctlr).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The AICS functionality is also possible via the bt_aics
API, and this was just a way to ensure that the AICS
instance was part of a MICS.
Removing makes MICP much simpler, and we can expect user
to know the context of a AICS.
This also fixes a few bad/missing guards.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename mics => micp_mic_dev (MICP Microphone Device)
Rename mics_client -> micp_mic_ctlr (MICP Microphone Controller)
This does not change any lines in the code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the profile abbreviation, MICP, instead of the
service abbreviation, MICS, for the MICP implementation.
The server implementation will use MICP and the client
implementation will use MICP_CLIENT for now, as that will
be updated in a future commit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The codec (or rather codec configuration) is now taken from the
previously received BASE. This also means that the BASE (with
the codec configurations) is now also stored statically.
When the application attempts to synk to the broadcaster
the stack will lookup the codec configuration based on the
bis index, as a BASE may have multiple subgroups
with multiple codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The shell module will now use BT_AUDIO_CONTEXT_TYPE_ANY
instead of BT_AUDIO_CONTEXT_TYPE_UNSPECIFIED as that provides
a more flexible solution.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some functions are only used for the unicast server
but was guarded by CONFIG_BT_AUDIO_UNICAST instead of
CONFIG_BT_AUDIO_UNICAST_SERVER.
Some parts of the unicast-server-only code also had
client specific code that would never be called.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for using PACS and/or capabilities for
the broadcast sink role. PACS and capabilities were
originally only supported for the unicast server
role, so the PACS callbacks were moved their own
struct, as if a device supports both the unicast
server role and the broadcast sink role, it will
only have a single PACS instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This handles Write Preset Name operation that is used to change the
preset name. This covers as well changing the preset name by server.
Fixes: HAS/SR/CP/BV-04-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The BT_CODEC_LC3_CONFIG_* macros had a hardcoded location
and context, which makes them a lot less usable.
Updates the macro, and the macros that used them.
This also removes the BT_CODEC_LC3_CONFIG and instead
just uses the BT_CODEC_LC3_CONFIG_N macro, which has
then been renamed to BT_CODEC_LC3_CONFIG.
As an addition, the macros and their input has
also been better documented.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The iso_rx_qos is only used for unicast audio, as
we do not set the RX QOS for the broadcast sink, nor
can a broadcast source set RX QOS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
the CSIS client now has a ordered access procedure function.
The function implements the procedure as per the CSIP spec,
where it will verify that 1 or more members are unlocked,
and the execture a procedure on each member in ascending
order of rank.
The procedure can be anything (even a non-BT procedure),
and it will be up to the applicaiton to implement
what to do in that.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Having the members array being const causes a lot of
limitations in the implementatation, and was
occasionally even disregarded. Removed to make the
implementation more flexible.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
