Change implementation of cte_recv_cb to print information about IQ
samples type. The changed code is ready for use of 8 bits and 16 bits
signed integer IQ samples. User has sample level option to enable
printing IQ samples.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Toward deprecated DT_LABEL() macro, replace the handful of cases
that use DT_LABEL(node) with DT_PROP(node, label).
Signed-off-by: Kumar Gala <galak@kernel.org>
Some platforms have the possibility to cancel the powering off until the
very latest moment (for example if an IRQ is received). Deal with this
kind of failures.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Setting CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT here is unnecessary
as the value needed is equal to the default.
Signed-off-by: Adam Zelik <adam.zelik@nordicsemi.no>
The function will be used to update the RSI value. The returned value
can be later used in advertisement data for set identification. This
removes the need of specific bt_csis_advertise function so that the user
can call the API to generate new RSI once needed (e.g. on RPA change).
This allows the user to manage the advertisement data to fit it's needs.
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Disabled (0x00)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 33
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x1d
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Unknown EIR field 0x2e: 16e61d64dc45
Name (complete): audio test shell
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
Advertising handle: 0x00
Advertising random address: 4E:21:29:F8:94:93 (Resolvable)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Enabled (0x01)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Test effectively requires a microchip,xec-ps2, but it was "optional"
even though the test continued setting up a callback that makes use of
the device.
- Improve test filtering so that it requires a valid compatible to be
enabled (allows to delete redundant ps2 tag)
- Initialize device at compile time (allowing to constify its pointer)
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Require peci-0 alias (test without it is pointless)
- Initialize peci device at compile time
- Filter depending on alias
- Remove redundant peci tag
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Device ready check was wrong (< 0 ?!), so fix it. Also drop static
qualifier for the device variable (not needed) and initialize at
definition time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the can_state enumerations to contain the word STATE to make their
meaning more clear:
- CAN_ERROR_ACTIVE => CAN_STATE_ERROR_ACTIVE
- CAN_ERROR_WARNING => CAN_STATE_ERROR_WARNING
- CAN_ERROR_PASSIVE => CAN_STATE_ERROR_PASSIVE
- CAN_BUS_OFF => CAN_STATE_BUS_OFF
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The test case "samples/boards/mec15xxevb_assy6853/power_management" could
always pass until commit 5f60164 was merged in. This patch changes the sem
take timeout value from 50ms to forever of the log thread, it will make the
idle thread run longer and takes more stack memory. Analyzed the coredump
of the failed test case, it can be found that the test case stucks at
z_idle_stacks. The test case used default CONFIG_IDLE_STACK_SIZE = 256 in
kernel/Kconfig, now we increase the value to 512 in prj.conf for this test
only. With this change, the test case can pass with the commit of 5f60164.
Fixes#47987
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
When coverage is enabled, some boards require more stack space
for the custom threads created in main(). Since this "samples"
already has CONFIG_TEST enabled, we can pad the stack size
with CONFIG_TEST_EXTRA_STACK_SIZE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Updates tflite-micro sample hello_world to use CMSIS-NN optimized
kernels. This is also documented in the corresponding README file.
Signed-off-by: Måns Nilsson <mans.nilsson@arm.com>
Decouple the zephyr/net/socketcan.h and zephyr/drivers/can.h header files
by moving the SocketCAN utilities to their own header.
This is preparation for including the SocketCAN types defined in
socketcan.h in a native posix (Linux) SocketCAN driver context without name
clashes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN header from socket_can.h to socketcan.h to better
match the naming of the functionality.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN utility functions to reflect the new naming of the CAN
controller API and SocketCAN API data types.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN data types to "socketcan_*" in preparation of renaming
the low-level CAN controller API data types.
This breaks the naming compatibility with the similar SocketCAN data types
from the Linux kernel, but Zephyr and Linux SocketCAN are not 100%
compatible anyways (only the structure fields are compatible, extended
functionality such filtering, error reporting etc. are not).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The sensor driver API specifies gyroscope units in radians/second, not
degrees/second. Fix the lsm6dso sample application printk string to
display the correct units.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Names of some testcases are duplicated in another files.
This change rename duplicated testcases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
So far LOG_DBG() was used inside debug hook for mbedTLS library. This meant
that it was hard to distinct log messages by simply looking at the log
level number, even though Zephyr logging subsystem supports colorful logs
depending on log level.
Choose an appropriate Zephyr LOG_*() macro based on log level coming from
mbedTLS library. Remove log level number from formatted log messages, as it
is now redundant.
One controversial thing about this change is that mbedTLS' "2 State change"
log level is mapped to Zephyr's "warning" log level. Those are not really
warnings in real life, but rather informational messages. However, using
"warning" log level for those allows to clearly distinguish between "2
State change" and "3 Informational" debug messages from mbedTLS.
Additionally, mbedTLS debug message implementation does not seem to be safe
to use in production, so keeping in mind MBEDTLS_DEBUG will be enabled just
during debugging phase, printing "2 State change" logs as warnings should
not be a big deal.
Set default MBEDTLS_DEBUG_LEVEL value depending on selected Zephyr logging
module level, so that only single option needs to be configured in
application project.
Remove prompt for MBEDTLS_DEBUG_LEVEL, so that interactively (e.g. via
menuconfig) adjusting MBEDTLS_LOG_LEVEL will always result in automatically
updating MBEDTLS_DEBUG_LEVEL option. This is to prevent so called "stuck
symbol syndrome".
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Explicitly set the newly add public_network and iq_inverted settings
in lora_modem_config in the lora send and receive samples.
Signed-off-by: Tim Cooijmans <timcooijmans@gmail.com>
code to demonstrate the utilization of assymetric
dual core infrastructure based on soft-IPM implementation.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
Partially revert commit 0028e9733295316d152eba07bf56677d83f4b1b5.
Timeout for tests/posix/common must be still increased for slow
platforms (previously was 120 sec).
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Now that ethernet drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Because 1-wire drivers no longer use depends on serial/i2c, but select
the Kconfig for the bus they depend on, several overlays can be removed.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Now that video drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that audio drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update lvgl for devicetree updates to use zephyr,keyboard-scan.
Remove Kconfig symbol (LV_Z_POINTER_KSCAN_DEV_NAME) that don't exist
anymore since these values are coming from devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Introduce zephyr,keyboard-scan chosen node property to point to the
node that implements the default KSCAN device. This is similar to
the zephyr,display property.
We switch over the samples to utilize the new property instead of
kscan0 alias.
Signed-off-by: Kumar Gala <galak@kernel.org>
espi saf node is not enabled in mec15xxevb_assy6853.dts so the sample
will fail to build. For now disable CONFIG_ESPI_SAF to get the sample
to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that eeprom drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add a sample to demonstrate use of (LP)U(S)ART with wakeup capability
This sample is provided with 2 configurations
- nucleo_wb55rg: Basic configuration that could be exercised in CI
- stm32l562e_dk: "Full feature" configuration that require some set up
configuration (be able to display console from lpuart) and allows to
achieve lowest power consumption.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Although it is possible to simply use the interface number,
it has proven convenient to use the names for the interfaces
in the samples.
Migrate to DEVICE_DT_NAME().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Adding configuration to run the watchdog sample application
on the stm32 boards through 2 common overlay files:
one for running on the IWDG one for WWDG, if compatible.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Having the LED device enabled in devicetree will now get the driver
enabled by default when CONFIG_LED=y is set. So we can remove
setting driver enabling Kconfig values in various .conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
