When transmitting a frame, inform the radio driver whether
security processing and/or header updates are needed or not.
When a frame was transmitted, inform back to OpenThread whether
the security procedure and/or header updates were completed for
the frame or not.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
By default ICMP desination unreachable error packets are generated when
input packets target ports that are not in a listening state. This not
only reveals the presence of the host on the network which may be
considered a security vulnerability depending on the application, it
also ends up triggering ARP lookups to respond to the sending host. With
a small ARP table and a network where there may be broadcast (or
multicast) service discovery traffic such as mDNS or uPnP, ARP table
thrashing can occur impacting network stack performance.
Signed-off-by: Berend Ozceri <berend@recogni.com>
Socket CAN does not require interface link address to be
assigned, check is not applicable for socket CAN
interfaces. As this address is NULL for socket CAN interface
it results in assertion.
Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com>
k_timeout_t was converted to ticks using a nonsense function
causing poll timeout corruption for offloaded sockets; this
commit uses ticks directly from the struct instead.
Fixes#37472
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
According to MbedTLS API documentation, its session must be
reset if mbedtls_ssl_handshake returns timeout error. This
commit resets the session for said return value, and that
allows us to call send() multiple times even if handshake
times out for previous calls.
Fixes#35711
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Add missing otPlatTimeGet implementation which is needed for proper
calculation the time offset in host-RCP communication.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fix potential bug when returning error codes not handled by
OpenThread in `otPlatRadioTxDone`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
ZFD_IOCTL_POLL_OFFLOAD operation needed special handling, as it needed
to modify the fds table for the offloaded implementation, overwriting
websocket file descriptors with the underlying offloaded ones. This is
only needed for the offloaded sockets, as the native implmentation use
POLL_PREPARE/UPDATE operations instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The websocket implementation of ioctl wrongly passed websocket context
to the undrelying `ioctl` implementation instead of the context of the
underlying socket.
Additionally, currentl implementation used the vtable of the native
socket implementation unconditionally, making it unusable with an
offloaded underlying socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A mutex is used to syncrhonize the start, stop and service() functions
of the RD client. Previously it could happen that while service() was
working on e.g. bootstrapping, a stop() call by another thread would
close the socket. Then the bootstrapping process would detect it as a
network error, and restart the process.
Fixes#37170.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Change DSA API to use `net_if` directly to make API calls instead of
indirectly via `dsa_context` and `switch_id`.
Remove unused `switch_id`, `switch_enable_port`, and `dsa_get_context`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Check for the address family of the packet when setting the multicast
destination address used in the response. Current code checks either the
query type or the stack configuration, which can result in setting the
wrong type of address for the frame.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This provides a command line interface to query and modify
bridge instances, similar to Linux's brctl utility.
It can be used to inspect an application's bridge usage,
or manage a bridge of its own in a generic way.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This adds the ability to create Ethernet bridges for connecting
separate Ethernet segments together to appear as a single
Ethernet network.
This mimics the Linux functionality of the same name.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
In case a non-readable resource gets updated (either by the server or
with an API), it makes no sense to send a notification in such case, as
no such resources are not included in notifications anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Flag that indicates if a given packet is being retransmitted has become
obsolete since more detailed flags were added. This commit removes the
flag and references to it altogether.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Fix `poll()` handling for DTLS clients when the underlying socket is an
offloaded socket. As in this case no `k_poll()` is used underneath, it's
not possible to monitor the handhshake status with `tls_established`
semaphore. Instead, do the following:
1. If no handhshake is in progress yet, just drop the incoming data -
it's the client who should initiate the handshake, any data incoming
before that should not be processed.
2. If handshake is currently in progress, lift the `POLLIN` flag and add
small delay to allow the other thread to proceed with the handshake.
3. Otherwise, just proceed as usual.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TLS/DTLS handshake in most cases is a blocking process, therefore
the underlying socket should be in a blocking mode to prevent busy
looping in the handshake thread. Fix this by clearing the O_NONBLOCK
flag on the underlying socket before the handshake, and restoring it
afterards.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The openthread has enhanced features for periodic parent search,
this commit adds kconfig options to enable and configure these.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Introduce a helper function for being able to remove any arbitrary
length from tail of packet. This is handy in cases when removing
unneeded data, like CRC once it was verified.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
`OT_LOG_LEVEL_NONE` has some uses within OpenThread but it is not
hanled in the Zephyr's platform implementation. This commit makes
use of those logs as `LOG_LEVEL_ERR` level.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When zsock_close() is called, socket is freed before the mutex for the
socket is unlocked. If the freed socket is given to another thread
immediately, the mutex for the socket will be initialized by the new
socket owner, while the mutex is still locked by the thread calling
zosck_close().
Fixes#36568
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
When tcp_send_data() is called to resend data, but there is no data
to resend, zero length packet is allocated and NULL net_buf is passed
to net_buf_frag_insert() in which assertion fails.
Fixes#36578
Signed-off-by: Chih Hung Yu <chyu313@gmail.com>
6lowpan module can swap the original buffer with a newly allocated one
during decompression in case the decompressed header would not fit into
the original buffer. Therefore, storing the LL address offset and
restoring the pointer after decompression as it is done today is not
correct, as the new packet with decompressed IPv6 header will not
contain the LL header.
As the 6lowpan module doesn't deallocate the original buffer and
doesn't overwrite the LL header, its fine to use the original
pointers as they are.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Regular OpenThread upmerge to bring in a fix for a possible
infinite loop and support for DNS service subtypes.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Instead of manually computing payload offset, let the CoAP library do
the work, and use the payload pointer returned by the
`coap_packet_get_payload()` function instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The function did not work correct for packets generated with Zephyr
APIs, as `max_len` holds the entire buffer size, not the actual packet
size.
Additionally, unify how Payload Marker is handled in the calculation -
currently the coap parsing function adds it to the `opt_len` field,
which is counter-intuitive.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is important that offset is set in the same manner, regardless of the
origin packet - it should indicate the final packet length in both
cases, when the packet is generated on the Zephyr side with CoAP APIs,
and when it's parsed from the UDP datagram. This allows for functions
like `coap_packet_get_payload()` to work correcty in both cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rename `write_signal` to `readable` and `read_signal` to `writeable`
which are more meaningful to the actual states they represent, and make
the code analysis easier.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case read or write were called before the actual poll() call, the
poll() function was not signalled correctly about such events, which in
order could lead to a deadlock if the poll() was called with infinite
timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This will fix a bug caused by creating a multi instance resource with
only a single resource. Previously this was treated as a single instance
resource. This is now properly treated as a multi instance resource with
one instance
Signed-off-by: Markus Rekdal <markus.rekdal@nordicsemi.no>
Add new custom transport type.
This allows user defined transport for MQTT communication.
The user must implement the transport procedure.
Fixes **#27015**
Signed-off-by: Vlad Tuhut <vlad.tuhut@raptor-technologies.ro>
Direct openthread API usage requires explicit locking,
which is also used internally.
Exposing a work queue through the openthread context allows
work to be submitted without the need to block other threads.
In particular with CONFIG_OPENTHREAD_MANUAL_START, application
logic can offload work which otherwise would need to wait for
the lock to become available.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
coap_response_received returned NULL if the observe option was out of
order, however it makes more sense to return the coap_reply handler
without actually calling it.
Additionally the reorder check has been modified to partially match
the RFC.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
- bugfix: Accept initial tftp server reply from a port different than
the one used to establish the connection (typically 69) as mandated
by RFC 1350. Previous implementation was not standard compliant.
- bugfix: close socket in case of error or timeout.
- bugfix: Reset retransmit counter after receipt of a good packet.
- bugfix: Use CONFIG_TFTP_LOG_LEVEL to set log level.
- api: upon successful receipt of the file set `client.user_buf_size`
to the size of the file received.
- Restructure the code, comments.
- Limit usage of global variables.
- Limit usage of `goto`.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The openthread initialization in turn calls platform specific
functions, lock the API during this step.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Added notify_timeout_cb to struct lwm2m_ctx to allow application to
handle notify timeout
Added lwm2m_rd_client_update to lwm2m.h to allow application to
trigger registration update
Added notify_message_timeout_cb which calls notify_timeout_cb from
struct lwm2m_ctx and logs an error message
Fixes#31499
Signed-off-by: John Power <john.power@xylem.com>
This commit fixes diag repeat command port by fixing issue with
incorrectly handled repeat timer.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
