Regular OpenThread upmerge to bring in a fix for a possible
infinite loop and support for DNS service subtypes.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
CONFIG_DEBUG_OPTIMIZATIONS should not be enabled by default in
prj.conf for tests or samples. Remove it from a few places that it
is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Configure a timeout for send/recv operations so that the sample can
recover in case the connection stalls (for instance due to IP address
change on an interface).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Google server that the sample connects to sends a larger certificate
since recently. As the overall size of the message conveying the
ceritificate is ~4700 bytes now, current mbedTLS configuration did not
allow to reassemble the message and thus caused failure during the
handshake.
Fix this by increasing MBEDTLS_SSL_MAX_CONTENT_LEN parameter (with some
extra space for any future changes).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Let's Encrypt X3 certificate is no longer in use, replace it with an
up-to-date certificate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When a WIFI driver is slow to get interface up the system not connect
to WIFI access point. This add some tries to let driver be proper
initialize to allow accept connection request.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The sockaddr address length was not initialized properly
when receiving packets.
Coverity-CID: 232698
Fixes#35159
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In Mbed TLS:
commit eccd88871767e2fba5f3a079cfdfcb77c376cf20
Author: Gilles Peskine <Gilles.Peskine@arm.com>
Date: Tue Mar 10 12:19:08 2020 +0100
Rename identifiers containing double-underscore
changes the name of a symbol we use. As part of upgrading to newer
versions of Mbed TLS, change the name of the symbol we use.
A better fix would be to not use this symbol at all, and perhaps define
our own symbol the same way this internal symbol is defined within the
library.
Signed-off-by: David Brown <david.brown@linaro.org>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Coprocessor sample was lacked of test configuration which makes
buildkite/zephyr to fail. This commit fixes it by providing test
configuration for this sample.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The device has sent RESET_POWER_UP message before the communication
with the host hadn't been established. It could be observed with
pyspinel which displayed `Framing error`.
This commit fixes the bug by initializing NCP after the host stated
is ready to communicate.
This commit reverts initialization the USB stack into function
otPlatUartEnable to be consistent with others OpenThread platforms.
OpenThread co-processor samples are not affected by #27071 as they use
USB for SPINEL communication with host and not for UART console.
Note:
When co-processor communicates by USB CDC ACM and it is hard reset
(what is happening in current Zephyr OpenThread platform)
the connection needs to be properly handled by the host.
For posix platform used together with RCP it was implemented in:
https://github.com/openthread/openthread/pull/6454
and for NCP:
https://github.com/openthread/wpantund/pull/492 .
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This application shows how to use SO_TXTIME option, which can be
used to specify the time when the network packet should be sent
out by the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The conn_raw_input() in connection.c will clone the incoming
packet so that it is possible to receive socket data in
multiple packet sockets. This is all fine except that if the
socket is never calling recv(), then the cloned net_pkt is never
processed and we will have a memory leak.
What this all means in practice, is that we should call recv()
for every packet socket in order to flush the socket for any
incoming data even if the socket is just sending data.
Fixes#34462
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sample uses generate_inc_file_for_target for some "webpages" that
get included. However, the directory that the generated files are
put into: ${ZEPHYR_BINARY_DIR}/include/generated/web_page isn't
created and thus the build fails.
Add a simple 'file(MAKE_DIRECTORY ..)' to create the dir.
Fixes#34345
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove board code and a few associated samples/tests that explicitly
call pinmux_pin_set() to set a given pin as GPIO. This is handled as
part of gpio_mcux_configure() so we don't need to do it again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add an overlay-capture.conf file that can be used to allow network
packet capturing in this sample app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A simple application that allows you to use net-shell to
configure network packet capturing. The captured packets are
sent to external systems for processing. This can be used
for debugging network protocols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Civetweb does not work properly with mbedtls if Posix APIs
are enabled. For example time function prototypes are not found
by the mbedtls module if we enable mbedtls in the sample.
Disable TCP ISN RFC6528 support because of this for civetweb
samples, as setting that option will pull in mbedtls and
we get a compilation warning because time() is not declared
by any header file that mbedtls is including.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove SPI_[0-8] and SPI_[0-8]_OP_MODES Kconfig symbols as no driver
uses them anymore. We also cleanup board and sample code to remove
use of these symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
We need to set a proper IPv4 netmask to each VLAN interface
so that IPv4 source address selection will work properly.
If we do not do this, then the network interface could be
selected incorrectly for the VLAN interfaces which could then
mean that the packet might get dropped by the target device.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
socket_can_generic.h makes some assumptions that are not always valid
for various drivers with regards to numbering. To clean this up we
add defines for SOCKET_CAN_NAME_0 and SOCKET_CAN_NAME_2 in addition to
SOCKET_CAN_NAME_1.
We also move struct socket_can_context into the drivers themselves
since they know best how many CAN interfaces are getting supported and
what naming/number convention they'd have.
Additionally, this also exposes a few other build issues with the
can_mcux_flexcan driver that get fixed.
Finally, we remove the platform_allow from samples/net/sockets/can
since it is no longer needed.
Fixes#31733
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
After the latest upmerge, OpenThread requires explicit configuration
of the Master Key. This commit adds a Kconfig symbol that can be
used to setup its value. By default no Master Key is configured and
OpenThread generates a random one.
The Sockets Echo samples are configured with a fixed key with this
commit.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If CONFIG_LOG_BACKEND_NET_AUTOSTART is disabled, then the syslog
network backend is not started automatically. This option is
enabled by default but it might be that application needs to
start the backend manually if the network is slow to start or
some special routes needs to be set by the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
