It is desirable to have the read and write like functions follow the
POSIX read and write parameter types.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
If BT_ISO is enabled we now compile conn.c which contains a
lot of functionality used by BT_ISO, even for broadcast-iso
builds, i.e. builds that do not require BT_CONN.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change removes logs and assertions from default configuration.
They can be optionally enabled with debug_overlay.conf.
CONFIG_BT_BUF_CMD_TX_COUNT is increased to avoid dropping
HCI commands.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Option to have continous scanning simultaneously while
advertising and multiple peripheral role is active.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Application demonstrating Bluetooth Low Energy Central role
functionality by scanning for other devices and establishing
connection to upto 62 peripherals with a strong enough
signal.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added sample to demonstrate use of multiple identity and be
able to be connected to multiple times from same central
device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
This commit updates the NS board variant from
`nrf5340dk_nrf5340_cpuappns` to `nrf5340dk_nrf5340_cpuapp_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit fixes the button activity notification not working issue.
The right attribute(4) is used for the button service.
This has been tested on nucleo_wb55rg and disco_l475_iot1 platforms.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Move configuration related with BLE controller into board specific file.
That is required to allow building the sample for nRF5340 where BLE
controller is not part of the sample image.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This is a simple comments fix. This sample code is for the
"Health Thermometer Service", but at one location the comments read
"Heart Rate Service".
The change replaces "Heart Rate" with "Health Thermometer".
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
Add the ability to perform a write on the object name GATT
Characteristic with a notification callback to the application
that the name has been written.
In order for this operation to work the memory backing the
object name must be modifiable. To prevent forcing the user
to always allocate 120 bytes for the name, the maximum name
length is changed from a define to a configuration parameter.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
Adds a sample that demonstrates how to transfer a periodic
advertising sync from a device to another device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a sample of using (in this case subscribing) to periodic
advertising sync transfer (PAST).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Demonstrate use of bt_gatt_find_by_uuid in peripheral sample. This
avoids the magical array index.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a new Kconfig option, BT_ISO_UNICAST, to make it possible
either configure unicast only, broadcast only or both.
This results in some code being moved, but not modified, and
should not effect anything.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use UUID encode macro fro 128-bit UUIDs for readability. This makes
it easier to see which service you are working with as the
bt_uuid_to_str prints the 128-bit UUIDs in this format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Create minimal configuration for the peripheral_hr. Which can
be used to build this sample for nRF52810 and nRF52811 targets.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
Fix peripheral sample handling of string values. The read callback
uses strlen to get the length of the current string value. Make sure
that the string value is always zero-byte terminated.
Fix multiple characteristics using the same storage for its value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The sequence number is needed in the appliaction layer to detect lost
packets in the ISO stream in cases where the timestamp is not included.
(Sequence number is mandatory to include where timestamp is optional).
The API for the public metadata have been moved to a public header file.
As the size of the ISO meta data exceeds the default 4 octets net_buf
user_data the public ISO metadata have been moved into a seperate array.
The internal metadata is still stored in net_buf user_data.
This also fixed the user_data overflow on 32 bit systems, caused by
writing the ts into user_data on index 4 to 7, which is outside the 4
allocated bytes.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
The sample would consequently try to print invalid data
the offset into the data was incorrect calculated to
always be at the end of the data, instead of at the
end of the data minus an offset.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Converts the Bluetooth peripheral_hr sample.yaml to select boards for
the frdm_kw41z shield configuration by depending on the arduino_serial
feature instead of using an explicit platform_allow list. This will
enable twister to automatically select new boards that add support for
an Arduino serial port.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The required configuration is already selected by the Kconfig file for
all nrf devices that support TEMP peripheral.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
The TEMP sensor is not present in configurations like
nrf5340dk_nrf5340_cpuappns.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
Converts the sample to the new k_work API, and introduces a blink
boolean to catch cancel failures.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add an application that uses Direction Finding API for reception
and sampling of CTE in connectionless mode (periodic adverising PDUs).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the periodic sync sample to use the new delayable work API
for blinking the LED.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There is a choice to log btmon logs over UART or RTT.
You can choose number of RTT buffer, set its name and size.
Replaced CONFIG_BT_DEBUG_MONITOR with CONFIG_BT_DEBUG_MONITOR_UART
for UART usage and CONFIG_BT_DEBUG_MONITOR_RTT for RTT.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Add an application that initializes Bluetooth Subsystem,
creates an Extended Advertising set, starts Periodic
Advertising and creates BIG to demonstrate ISO Broadcaster
functionality.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We need 1 byte of headroom for the SPI HCI protocol.
This is not added automatically on the slave side of the SPI connection.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
