Increase test timeout to 500s because it was noticed
that the default of 60s has truncated the test
suite run for nrf52840_pca10056
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
The current flash configurations for all nRF52840's in Zephyr is
VERY constrained when it comes to allowing samples any space for
storage or custom areas. It only leaves the last 4 pages of flash
for "storage".
The nRF52840 is also capable of using OpenThread which defaults
to using the last 4 pages of flash for storing OpenThread-related
network data.
This means that while using OpenThread under any configuration
designed to use mcuboot partition slots, there is no space left
over for storage of any kind.
Let's adjust the partition table to set storage at 8 pages of
flash (32k). This fixes the conflict with OpenThread and leaves
room for future use cases that may arise.
Signed-off-by: Michael Scott <mike@foundries.io>
Ram back-end was unnecessary included in non qemu test which
increased RAM footprint much.
Patch includes ram backend into build only for qemu_x86 build.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The heap, plus a few globals relevant to mbedtls get put in
their own memory partition.
With systems that have power-of-two region size/alignment
constraints, this results in a 64K partition being created,
even though we are using just a whisker above 32K.
Lower the heap size a little so everything fits in 32K.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It was possible via Kconfig to assign any partition for FCB using
its number. Partitions flash_area_id becomes non predefined
(are auto-generated). So it is possible only to guess which
number will be signed to certain area.
Unfortunately it is not possible to transfer FLASH_AREA_XXX_ID
label via Kconfig.
Patch assigns settings to the storage partition and remove
SETTINGS_FCB_FLASH_AREA property from settings Kconfig.
fixes#13388
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The reftime variable used for performance numbers is not initialized
prior to being used. Initialize it to the current uptime so delta
can be calculated correctly.
Fixes#13877
Fixes CID-190936
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Inside test_file_truncate(), the results of fs_seek() are not
checked. So adds some checks there.
Fixes#13874
Fixes CID-190939
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Checking the return of fs_stat to ensure that there is not hidden error.
Problem spotted by coverity.
CID 190949
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In order to follow the naming from Linux, change the name of
can_msg to zcan_frame, and can_msg_filter to zcan_filter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that can_copy_*() functions work as expected.
These functions are used by SocketCAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
settings_line_len_calc() calculates only setting record
payload size, not record layout in flash size.
this patch remove inadequate test for this function.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added test for check whether value lenght is properly
stored for unaligned settings record size.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Nios2 platform was disabled due to compilation error. Meanwhile,
issue has been solved and tests can be re-enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This patch adds a JSON web token library that adds the capability
to sign JSON tokens. This was located in subsys due to the dependency
on MBEDTLS, which resides in /ext.
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Patch introduces flash_map subsystem to operate on flash
image instead of direct operation using flash_driver API.
Changes allows to support operation on the image in any flash
device.
flash_map was not available when this subsystem was introduced.
Signed-off-by: Findlay Feng <i@fengch.me>
Patch introduces flash_map subsystem to operate on flash
footprint instead of direct operation using flash_driver API.
Flash area ID is used in API instead of direct flash-bank-offsets.
Changes allows to support operation on the partition in any flash
device.
flash_map was not available when this subsystem was introduced.
Signed-off-by: Findlay Feng <i@fengch.me>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set Kconfig symbol SETTINGS_FCB_FLASH_AREA based on the
DT_FLASH_AREA_<FOO>_ID define instead of being hard coded.
We replace 3 with DT_FLASH_AREA_IMAGE_SCRATCH_ID and
we replace 4 with DT_FLASH_AREA_STORAGE_ID.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After addition of flash_map auto-generation it is needed to
use generated flas_area name instead of hard-code.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After including native_posix USB controller we can perform some simple
tests on native_posix.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
USB relies on descriptors and configuration data allocations in
specific sections. This simple test verifies that at least size of the
data is correct.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add test to log_output module. Test suite covers usage of
log_output_string function.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Extended logger configuration to allow function name prefix for
messages with certain severity levels. By default only debug
messages are prefixed with function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Such API is convinient for check the persistent storage
value size or whether the value is NULL.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
