Remove old unused code sending media status, sending this packet
causes Windows problems although Linux works with it. Removing this
code does not affect RNDIS functionality.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use standard NET_ETH_MAX_FRAME_SIZE for frame size calculation. This
changes buffer from 1522 to 1514 + 2 + 4. Remove also magic numbers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use standard defined frame size for buffer and wMaxSegmentSize
parameter. Changes frame size from 1522 to 1514.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use USB transfer API for data transfer. Simplify notification count,
removing delayed work, use usb_transfer() logic instead.
Fixes#14127
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
subsys/usb/Kconfig 'source's subsys/usb/class/Kconfig (which in turn
'source's subsys/usb/class/netusb/Kconfig) within an
'if USB_DEVICE_STACK', so the dependencies on USB_DEVICE_STACK added
within those files are redundant.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Commit 766101c was a wrong fix as NETUSB_MTU is the actual network MTU.
Instead of using this value in EEM/ECM drivers, a relevant value should
be set for each there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since commit b48a8c3247 ("usb: device: Add composite status callback")
the cb_usb_status callback is not called anymore in composite mode. The
cb_usb_status_composite callback is called instead.
This patch updates the ECM driver to use either one or the other
depending on CONFIG_USB_COMPOSITE_DEVICE.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit b48a8c3247 ("usb: device: Add composite status callback")
the cb_usb_status callback is not called anymore in composite mode. The
cb_usb_status_composite callback is called instead.
This patch updates the EEM driver to use either one or the other
depending on CONFIG_USB_COMPOSITE_DEVICE.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit b48a8c3247 ("usb: device: Add composite status callback")
the cb_usb_status callback is not called anymore in composite mode. The
cb_usb_status_composite callback is called instead.
This patch updates the RNDIS driver to use either one or the other
depending on CONFIG_USB_COMPOSITE_DEVICE.
Note that in practice the RNDIS driver is forced to composite mode for
better compatility with Windows, so this fix is required to get the
RNDIS driver working.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add interface parameter to interface configuration callback to be able
to configure several instances of the same class.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
As rx_buf & tx_buf are defined with a NETUSB_MTU size, this cause
that the frames over 1500 bytes can not be received and are discarded.
Secondly, as fragmentation is not supported (for UDP and TCP datagram),
increase NETUSB_MTU to the maximum possible ethernet frame size :1522
Signed-off-by: Nicolas LANTZ <nicolas.lantz@ubicore.net>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move ECM functionality from netusb to function_ecm making defines not
needed in many cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
