These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Some device include a temperature sensor, usually used as a
companion for helping in drift compensation, that measure the
die temperature. This temperature IS NOT related to the the
ambient temperature, hence a clean separation between the two
is required.
This commit introduces a clean separation between the two
types of temperature leaving the old deprecated definition
still there.
The list of current drivers that read the die (and not the ambient)
temperature is the following:
- adxl362
- bma280
- bmg160
- bmi160
- fxos8700
- lis3mdl
- lsm6ds0
- lsm6dsl
- lsm9ds0
- mpu6050
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Enables the temperature sensor in the fxos8700 sample.
Change-Id: I2b4c306d3c5528dc32d940476c00180b5df08187
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SENSOR_CHAN_*_ANY will be deprecated, so use the new SENSOR_CHAN_*_XYZ
enum values.
Change-Id: I91cf25864613a934feab65588969d10c52fd4fe6
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
At the default sample rate of 400 Hz, there is not enough bandwidth on
the UART at 115200 baud to print every sample. Fix by decimating the
sensor data by 4 before printing to the console.
This issue was discovered after fixing ZEP-1507.
Change-Id: I451ec9873ca93fe417d5d5a2d6d13b5e921c7611
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Printing values as <integer_part>.<fractional_part> gives undesired
results for negative numbers, so print the values converted to floating
point to avoid this.
Change-Id: I871b8461f2d643a2adce67df064e9f5e6d506319
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The sample was reading the sample values regardless of return
value of the fetch sample function, now it exits the function and
prints an error message
Coverity-CID: 157576
Change-Id: If9a909ed9b617357a032c5632ac04984846d6744
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Adds a fxos8700 sample application that uses the sensor data ready
trigger to periodically print accelerometer and magnetometer data.
Change-Id: I43fef6cd6090b58d8d0168a25558a3a05781ea5d
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
